4030
RTS
4030
RTS 4030 Two-Wire IFB Beltpack with ¼" Jack
This portable two-channel listening station permits a user to monitor one audio channel in each ear with independent volume adjustment for each channel. It may be used as a component of the RTS® Series 4000 IFB system, or it may be used as a listen-only user station in an RTS® Two-Wire Intercom system.
In IFB applications, talent, such as newscasters, musicians, sportscasters, etc., can use the model 4030 to receive director instructions alone or to receive both audio program feed and director instructions. Behind-the-scenes personnel for production coordination and control may also use it.
The model 4030 receives operating power and audio via the model 4010 central IFB electronics station. In RTS® Two-Wire Intercom system applications, the Model 4030 may be connected and used like any other system-powered, two-channel beltpack.
In IFB applications, talent, such as newscasters, musicians, sportscasters, etc., can use the model 4030 to receive director instructions alone or to receive both audio program feed and director instructions. Behind-the-scenes personnel for production coordination and control may also use it.
The model 4030 receives operating power and audio via the model 4010 central IFB electronics station. In RTS® Two-Wire Intercom system applications, the Model 4030 may be connected and used like any other system-powered, two-channel beltpack.
Product Weight: 0.26 lbs
Dimensions: 1.5"H x 3.75"W x 3.65"D
Technical Tools
PDF Documents
- Manufacturer Data Sheet - RTS - 4030 (744 KB)
- Product Manual - RTS - 4030 (744 KB)
Manufacturer Specs
Interface Requirements
Earset/Headphone compatibility: Accepts 50 to 600 ohm earsets or headphones
Audio input requirements
Input Level: 2V p-p (0dBu) nominal
Input Impedance: 200 Ω ±5%
Noise Contribution: Less than -60dB nominal
Headphone Amplifier
Voltage Gain: 27±3dB from intercom channel to earset
Maximum Output: 65 mW into 150 ohms
Frequency Response: 250Hz to 8kHz +1/-4dB
Connector Pin Configuration
Headset Connectors
Type: 1/4” Monaural Plug
Tip: Headset Audio High
Sleeve: Headset Audio Low
Type: 1/4” Stereo Plug
Tip: Headset Channel 1 Audio High
Ring: Headset Channel 2 Audio High
Sleeve: Headset Audio Low
Audio/Power Connector
Type: XLR-3F
Pin 1: Common
Pin 2: Channel 1 audio and power input
Pin 3: Channel 2 audio
Power Requirements
32 VDC nominal (standard RTS line), 150mA maximum
Environmental Requirements
Storage: -4°F to 176°F, 0% - 95% humidity, non-condensing
Operating: 32°F to 122°F, 0% - 95% humidity, non-condensing
Earset/Headphone compatibility: Accepts 50 to 600 ohm earsets or headphones
Audio input requirements
Input Level: 2V p-p (0dBu) nominal
Input Impedance: 200 Ω ±5%
Noise Contribution: Less than -60dB nominal
Headphone Amplifier
Voltage Gain: 27±3dB from intercom channel to earset
Maximum Output: 65 mW into 150 ohms
Frequency Response: 250Hz to 8kHz +1/-4dB
Connector Pin Configuration
Headset Connectors
Type: 1/4” Monaural Plug
Tip: Headset Audio High
Sleeve: Headset Audio Low
Type: 1/4” Stereo Plug
Tip: Headset Channel 1 Audio High
Ring: Headset Channel 2 Audio High
Sleeve: Headset Audio Low
Audio/Power Connector
Type: XLR-3F
Pin 1: Common
Pin 2: Channel 1 audio and power input
Pin 3: Channel 2 audio
Power Requirements
32 VDC nominal (standard RTS line), 150mA maximum
Environmental Requirements
Storage: -4°F to 176°F, 0% - 95% humidity, non-condensing
Operating: 32°F to 122°F, 0% - 95% humidity, non-condensing