SAP-1626
RTS
SAP-1626
RTS SAP-1626 Source Assign Panel
This device provides a convenient means of assigning any one of 12 intercom channels and/or three program audio channels to 26 individual or groups of intercom user stations. Viewed as a "matrix switch", it transforms a basic two-buss intercom system into a 15-buss system. When used as an intermediary between Series 800 (conference line) master stations and RTS® Two-Wire Intercom system user stations, the SAP-1626 distributes the master station channels to each group of user stations.
While the master stations have multiple channel capability and can access a number of lines independently or simultaneously, user stations have only two-channel capability. The SAP-1626 programs each user station to correspond with the same channels on the master stations. Once the channel assignments are made, the master station selectively communicates with any combination of user stations programmed on different channels. The SAP-1626 can also be used to assign channels in a 15-channel user station system configuration without master stations.
While the master stations have multiple channel capability and can access a number of lines independently or simultaneously, user stations have only two-channel capability. The SAP-1626 programs each user station to correspond with the same channels on the master stations. Once the channel assignments are made, the master station selectively communicates with any combination of user stations programmed on different channels. The SAP-1626 can also be used to assign channels in a 15-channel user station system configuration without master stations.
Product Weight: 10 lbs
Dimensions: 3.46” H x 19.0”W x 9.8”D
Technical Tools
PDF Documents
Manufacturer Specs
Maximum Switch Carrying Current: 2.0 amps per output
Maximum Switch Breaking Current: 0.5 amps per output
Inputs: Intercom 12 lines, full-duplex
Levels 2 volts p-p nominal In and out
Program: 3 sources, simplex
Input Impedance: 800 Ω
Input Level Range: -4dBm to + 8dBm
Outputs
User Station: 20
Camera: 6
Power Requirements: Power is derived from the TW Intercom Power Supply(s)
Finish: Light grey enamel
Maximum Switch Breaking Current: 0.5 amps per output
Inputs: Intercom 12 lines, full-duplex
Levels 2 volts p-p nominal In and out
Program: 3 sources, simplex
Input Impedance: 800 Ω
Input Level Range: -4dBm to + 8dBm
Outputs
User Station: 20
Camera: 6
Power Requirements: Power is derived from the TW Intercom Power Supply(s)
Finish: Light grey enamel