HR-2
Telex
HR-2
Telex HR-2 Headset, 4-pin (f)
This medium weight headset with dynamic microphone has a noise reduction rating of 21dB and is suitable for use in moderately noisy environments. Its soft, moleskin-covered, foam-filled headband and ear cushions distribute pressure evenly over the entire ear with no pressure points, providing both comfort and an excellent acoustic seal.
The microphone's boom arm features a sealed ball-and-socket joint and flexible boom for precise microphone placement on any head size. It also rotates overhead for microphone placement on either side.
Cordage is protected inside the boom arm, its wire shielded throughout to protect against RFI and EMI. Strain-reliefs on all cords provide maximum durability. The HR-2 folds compactly for transport.
The microphone's boom arm features a sealed ball-and-socket joint and flexible boom for precise microphone placement on any head size. It also rotates overhead for microphone placement on either side.
Cordage is protected inside the boom arm, its wire shielded throughout to protect against RFI and EMI. Strain-reliefs on all cords provide maximum durability. The HR-2 folds compactly for transport.
Product Weight: 1 lb
Technical Tools
PDF Documents
Manufacturer Specs
Receiver
Type: Dynamic
Frequency Response: 50 Hz - 15 kHz
Sensitivity: 100 5 dB SPL (1 kHz, 1 mW input)
Impedance (at 1 kHz): 150 ohms (receivers wired in parallel)
Microphone and Amplifier
Element Type: Noise-canceling dynamic
Frequency Response: 100 Hz - 8 kHz
Sensitivity: -53 +2/-1 dB (ref: 1 V/bar at 1 kHz with 12 Vdc supply voltage and 100-ohm load)
Matching Impendance: 50-600Ω
Physical
Cordage: Straight cord, 5 ft. (1.5 m)
Connectors: 4-pin XLR female
Gross Weight: Approx 16 oz. (454 g)
Effective Head Weight: Approx 14.2 oz. (403 g)
Color: Black
Type: Dynamic
Frequency Response: 50 Hz - 15 kHz
Sensitivity: 100 5 dB SPL (1 kHz, 1 mW input)
Impedance (at 1 kHz): 150 ohms (receivers wired in parallel)
Microphone and Amplifier
Element Type: Noise-canceling dynamic
Frequency Response: 100 Hz - 8 kHz
Sensitivity: -53 +2/-1 dB (ref: 1 V/bar at 1 kHz with 12 Vdc supply voltage and 100-ohm load)
Matching Impendance: 50-600Ω
Physical
Cordage: Straight cord, 5 ft. (1.5 m)
Connectors: 4-pin XLR female
Gross Weight: Approx 16 oz. (454 g)
Effective Head Weight: Approx 14.2 oz. (403 g)
Color: Black