Innkeeper 1x
JK Audio
Innkeeper 1x
JK Audio Innkeeper 1x Digital Hybrid Telephone Audio Interface
This unit is perfect for radio or television talk shows, teleconferencing, or auto-answer IFB feeds. It connects audio signals to a standard analog telephone line without the variations in quality found with analog hybrids.
While the main function of a hybrid is to bring in the caller’s voice as clear and clean as possible, in the real world, your voice sent down the telephone line will bleed over into the caller’s audio. The Innkeeper 1x uses a 16-bit DSP to monitor the phone line and audio signals continuously in order to deliver excellent separation; its dual convergence echo canceller algorithm can achieve excellent trans-hybrid loss typically exceeding 50 dB, without any setup.
While the main function of a hybrid is to bring in the caller’s voice as clear and clean as possible, in the real world, your voice sent down the telephone line will bleed over into the caller’s audio. The Innkeeper 1x uses a 16-bit DSP to monitor the phone line and audio signals continuously in order to deliver excellent separation; its dual convergence echo canceller algorithm can achieve excellent trans-hybrid loss typically exceeding 50 dB, without any setup.
Product Weight: 5.2 lbs
Dimensions: 1.75"H x 7.3"D x 10.5"W
Technical Tools
PDF Documents
Manufacturer Specs
Input: Balanced Female XLR
Impedance: 1kΩ
Level: 15mV RMS, (-34 dBu) nominal
Mic/Line Pad Switch Line= +6 dBu max
Output: Balanced Male XLR Caller Out and Balanced Male XLR Mix Out
Impedance: 200 Ω
Level: 500 mV RMS, (-4 dBu) nominal, +14 dBu maximum
Headphone: 1/4" Stereo 8 Ω, 250 mW per channel
Frequency Response: Telephone Side, 200 Hz - 3600 Hz
Phone Line Connector: RJ11C
Speaker: Screw Terminals 8 Ω, 1 watt
Universal AC Power Input: 120-240 VAC, 50-60 Hz
Isolation: 1500 volts
Ringer: 0.8B REN
Impedance: 1kΩ
Level: 15mV RMS, (-34 dBu) nominal
Mic/Line Pad Switch Line= +6 dBu max
Output: Balanced Male XLR Caller Out and Balanced Male XLR Mix Out
Impedance: 200 Ω
Level: 500 mV RMS, (-4 dBu) nominal, +14 dBu maximum
Headphone: 1/4" Stereo 8 Ω, 250 mW per channel
Frequency Response: Telephone Side, 200 Hz - 3600 Hz
Phone Line Connector: RJ11C
Speaker: Screw Terminals 8 Ω, 1 watt
Universal AC Power Input: 120-240 VAC, 50-60 Hz
Isolation: 1500 volts
Ringer: 0.8B REN