BTR-800
RadioCom
BTR-800
Telex BTR-800 Base Station
This base station can support up to TR-825 four beltpacks in full time transmit, full duplex operation. Multiple base station/beltpack systems can be used together to meet the needs of virtually any wireless communications application.
Choose from 1440 frequencies in the UHF band – from 470 to 740 MHz – using the 800’s graphical user interface. Frequencies can be selected from factory preset groups of intermode free choices or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational bands.
Choose from 1440 frequencies in the UHF band – from 470 to 740 MHz – using the 800’s graphical user interface. Frequencies can be selected from factory preset groups of intermode free choices or any frequency in 25 KHz increments. Select from 720 TX and 720 RX frequencies each from independent 18 MHz operational bands.
Technical Tools
PDF Documents
Manufacturer Specs
♦ 1440 selectable frequencies
♦ 24 factory-selected, intermode-avoiding groups pre-set
♦ Two-channel intercom access from each beltpack
♦ Fully compatible with AudioCom®, RTS™ and Clear-Com® hardwired intercom systems
♦ Stage Announce Output With Relay Closure can be initiated by any beltpack user. A dry, line level +8 db adjustable signal is routed out the back of the base station via a 3-pin XLR connector, triggering two-way radios, IFB sends, green-room speakers or any other relay closure-activated device.
♦ “Fifth Person” Talk/Listen Station: A full talk/listen headset station at base so that an additional user can communicate on either intercom channel or both at once.
♦ Intelligent Power Control™: Beltpacks sense distance from the base station and intelligently reduce output by 10 dB when nearby. Eliminates overloading the base station receiver front end.
♦ Capacity: 4 beltpacks per base station
♦ 24 factory-selected, intermode-avoiding groups pre-set
♦ Two-channel intercom access from each beltpack
♦ Fully compatible with AudioCom®, RTS™ and Clear-Com® hardwired intercom systems
♦ Stage Announce Output With Relay Closure can be initiated by any beltpack user. A dry, line level +8 db adjustable signal is routed out the back of the base station via a 3-pin XLR connector, triggering two-way radios, IFB sends, green-room speakers or any other relay closure-activated device.
♦ “Fifth Person” Talk/Listen Station: A full talk/listen headset station at base so that an additional user can communicate on either intercom channel or both at once.
♦ Intelligent Power Control™: Beltpacks sense distance from the base station and intelligently reduce output by 10 dB when nearby. Eliminates overloading the base station receiver front end.
♦ Capacity: 4 beltpacks per base station