DX200
HM Electronics
DX200
HM Electronics DX200 Digital Wireless Intercom System
This system's digital 2.4 GHz license-free operation in the Industrial, Scientific and Medical frequency band gives you exceptionally clear sound without licensing costs or the intermodulation squelch issues commonly associated with systems operating in the crowded VHF bands.
Up to 15 communicators can be assigned to each base station, 4 of which can be used in handsfree, full-duplex mode. Digital encryption and FHSS technology prevent unauthorized personnel from hearing or interrupting your communication.
Dual slot diversity transmits the audio signal twice — at different times and hop frequencies — and locates the strongest signal to ensure clear, concise, interference-free communication. Vertical and horizontal diversity antennas are especially designed to prevent dropouts and provide the strongest audio signal possible.
Wired intercom interface supports one hardwired intercom channel using 2-wire, 4-wire, or both simultaneously. The DX200 is compatible with RTS and ClearCom 2-wire intercom systems. ISO+ mode gives you an additional 4-wire intercom interface by using the AUX IN and AUX OUT connections, allowing the system operate as a 2-channel intercom.
Rental Package includes:
1 BS200 Base Station
4 BP200 Beltpacks
4 Beltpack Batteries
2 Battery Chargers
5 HS12 Headsets
Up to 15 communicators can be assigned to each base station, 4 of which can be used in handsfree, full-duplex mode. Digital encryption and FHSS technology prevent unauthorized personnel from hearing or interrupting your communication.
Dual slot diversity transmits the audio signal twice — at different times and hop frequencies — and locates the strongest signal to ensure clear, concise, interference-free communication. Vertical and horizontal diversity antennas are especially designed to prevent dropouts and provide the strongest audio signal possible.
Wired intercom interface supports one hardwired intercom channel using 2-wire, 4-wire, or both simultaneously. The DX200 is compatible with RTS and ClearCom 2-wire intercom systems. ISO+ mode gives you an additional 4-wire intercom interface by using the AUX IN and AUX OUT connections, allowing the system operate as a 2-channel intercom.
Rental Package includes:
1 BS200 Base Station
4 BP200 Beltpacks
4 Beltpack Batteries
2 Battery Chargers
5 HS12 Headsets
Product Weight: Base Station: 9.2 lbs
Beltpac: 7.4 oz with battery and pouch
Dimensions: Base Station: 19”W x 1.72”H x 17.13”D (1-RU)
Technical Tools
PDF Documents
Manufacturer Specs
BS200 BASE STATION
General
Frequency Range: 2400 – 2483.5 MHz
Frequency Response: 200 Hz to 3.5 kHz
Power Requirements: 100-240VAC, 50-60Hz or 12-14VDC
Temperature Range: 32-122°F (0-50°C)
Beltpacs per Base: 15 can be registered
Any 4 can have simultaneous full-duplex communication at one time
4-Wire I/O: RJ45, 600Ω balanced, level adjustable, simultaneous operation with 2-wire
2-Wire I/O: XLR-3M, XLR-3F, externally-switchable RTS® or Clear-Com® mode, 200Ω, level adjustable, null adjustable
Auxiliary Input: XLR-3F/¼” (6.35 mm) combo jack, 600Ω balanced, level adjustable
Auxiliary Output: XLR-3M, 600Ω balanced, level adjustable
8Ω Speaker Output: 1W into 8Ω
Headset Connector: 4-pin mini-DIN, Electret microphone
Headset Output: 250mW into 32Ω
Front Panel Controls:
Power switch
Reset Registration, Reset, Unlatch and Register Beltpac buttons,
IC and ISO Receive level adjustments, IC 2W/4W and 4W-Only buttons,
IC4W-Only Send and Receive level adjustments,
Auxiliary In and ISO+ buttons, Auxiliary In and Out level adjustments,
Rotary knob for volume adjustment,
Headset IC/ISO Select button and Headset Talk button
Front Panel Indicators:
Registration Status indicator, IC and ISO Receive LEDs,
IC 2W and 4W-Only LEDs, Auxiliary In/Out LEDs,
Headset IC/ISO select LEDs, Headset PTT LED
Rear Panel Controls:
Clear-Com®/RTS® mode switch, RTS® Channel 1/2 switch,
2-wire channel line null adjustment
Antenna Type: External ½ -wave dipole (R-TNC connector)
RX/TX horizontal/vertical diversity
System Distortion: <2%
Communication Security: 64-bit encryption dual-slot diversity
Transmitter
Type: Frequency hopping, spread spectrum
Transmit Power: 100mW burst
Modulation Type: Gaussian filtered FSK, TDM
Frequency Stability: 13 ppm
Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature
Receiver
Type: Frequency hopping, spread spectrum
RF Sensitivity: <−90dBm w 10-3 BER
Frequency Stability: 13 ppm
Distortion: <2%
BP200 BELTPAC
General
Frequency Range: 2400 MHz – 2483.5 MHz
Antenna Type: Internal, horizontal/vertical diversity
Frequency Response: 200 Hz to 3.5 kHz
Battery Requirements: 3.6V lithium ion
Battery Life: Up to 20 hours
Temperature Range: 32-122°F
Headset Connector: 4-pin, mini-DIN
Mic Input: Electret microphone
Headset Output: 160mW into 32Ω
Controls: Power, Volume-up, Volume-down, IC, ISO
Indicators: Dual-color LED (red/green)
Communication Security: 64-bit encryption
System Distortion: <2%
Transmitter
Type: Frequency hopping, spread spectrum
Transmit Power: 100mW burst
Transmission Modes: Momentary or latch
Modulation Type: Gaussian filtered FSK, TDM
Frequency Stability: 13 ppm
Harmonics/Spurious: Exceeds FCC and ETSI specifications
Receiver
Type: Frequency hopping, spread spectrum
RF Sensitivity: <−90dBm w 10-3 BER
Frequency Stability: 13 ppm
Distortion: <2%
HS12 HEADSET
Super lightweight, single-muff design
Omni-directional Electret microphone
Adjustable for either ear
Flexible microphone boom
Adjustable stainless steel headband
General
Frequency Range: 2400 – 2483.5 MHz
Frequency Response: 200 Hz to 3.5 kHz
Power Requirements: 100-240VAC, 50-60Hz or 12-14VDC
Temperature Range: 32-122°F (0-50°C)
Beltpacs per Base: 15 can be registered
Any 4 can have simultaneous full-duplex communication at one time
4-Wire I/O: RJ45, 600Ω balanced, level adjustable, simultaneous operation with 2-wire
2-Wire I/O: XLR-3M, XLR-3F, externally-switchable RTS® or Clear-Com® mode, 200Ω, level adjustable, null adjustable
Auxiliary Input: XLR-3F/¼” (6.35 mm) combo jack, 600Ω balanced, level adjustable
Auxiliary Output: XLR-3M, 600Ω balanced, level adjustable
8Ω Speaker Output: 1W into 8Ω
Headset Connector: 4-pin mini-DIN, Electret microphone
Headset Output: 250mW into 32Ω
Front Panel Controls:
Power switch
Reset Registration, Reset, Unlatch and Register Beltpac buttons,
IC and ISO Receive level adjustments, IC 2W/4W and 4W-Only buttons,
IC4W-Only Send and Receive level adjustments,
Auxiliary In and ISO+ buttons, Auxiliary In and Out level adjustments,
Rotary knob for volume adjustment,
Headset IC/ISO Select button and Headset Talk button
Front Panel Indicators:
Registration Status indicator, IC and ISO Receive LEDs,
IC 2W and 4W-Only LEDs, Auxiliary In/Out LEDs,
Headset IC/ISO select LEDs, Headset PTT LED
Rear Panel Controls:
Clear-Com®/RTS® mode switch, RTS® Channel 1/2 switch,
2-wire channel line null adjustment
Antenna Type: External ½ -wave dipole (R-TNC connector)
RX/TX horizontal/vertical diversity
System Distortion: <2%
Communication Security: 64-bit encryption dual-slot diversity
Transmitter
Type: Frequency hopping, spread spectrum
Transmit Power: 100mW burst
Modulation Type: Gaussian filtered FSK, TDM
Frequency Stability: 13 ppm
Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature
Receiver
Type: Frequency hopping, spread spectrum
RF Sensitivity: <−90dBm w 10-3 BER
Frequency Stability: 13 ppm
Distortion: <2%
BP200 BELTPAC
General
Frequency Range: 2400 MHz – 2483.5 MHz
Antenna Type: Internal, horizontal/vertical diversity
Frequency Response: 200 Hz to 3.5 kHz
Battery Requirements: 3.6V lithium ion
Battery Life: Up to 20 hours
Temperature Range: 32-122°F
Headset Connector: 4-pin, mini-DIN
Mic Input: Electret microphone
Headset Output: 160mW into 32Ω
Controls: Power, Volume-up, Volume-down, IC, ISO
Indicators: Dual-color LED (red/green)
Communication Security: 64-bit encryption
System Distortion: <2%
Transmitter
Type: Frequency hopping, spread spectrum
Transmit Power: 100mW burst
Transmission Modes: Momentary or latch
Modulation Type: Gaussian filtered FSK, TDM
Frequency Stability: 13 ppm
Harmonics/Spurious: Exceeds FCC and ETSI specifications
Receiver
Type: Frequency hopping, spread spectrum
RF Sensitivity: <−90dBm w 10-3 BER
Frequency Stability: 13 ppm
Distortion: <2%
HS12 HEADSET
Super lightweight, single-muff design
Omni-directional Electret microphone
Adjustable for either ear
Flexible microphone boom
Adjustable stainless steel headband