RKP-4B
RTS
RKP-4B
RTS RKP-4B UHF Wireless Intercom Base Station
This four-button wireless keypanel intercom system is a one-to-one (one base station to one beltpack) full-duplex, digitally encrypted wireless intercom and will provide communication directly to RTS Matrix communication systems. The RKP-4 offers a list of standard features that are unparalleled in the industry, like frequency agility, digital audio encryption, advanced ClearScan™, battery telemetry to the base station, base station RF meter and much more. The RKP-4, like its sister product the BTR-1, is packed full of the latest technology like Intelligent Power Control, DSP Digital Audio Processing and proprietary digital audio encryption.
The RKP-4 system provides a menu driven, fully programmable 4-key user station in a wireless beltpack (RKP-4) and base station (RKP-4B) combination. The alphanumeric call waiting window is used for scrollable access to all ports, PLs, ISOs, IFBs, etc., to check and make key assignment and is configured with AZedit software. Keys may be assigned to any intercom function including talk, listen , talk/listen, relay, PL, ISO, IFB and SL. The RKP-4 system interfaces directly with ADAM, ADAM-CS, XS-9500, CS-9600, CS-9700, Zeus, and Zeus II.
The RKP-4 system provides a menu driven, fully programmable 4-key user station in a wireless beltpack (RKP-4) and base station (RKP-4B) combination. The alphanumeric call waiting window is used for scrollable access to all ports, PLs, ISOs, IFBs, etc., to check and make key assignment and is configured with AZedit software. Keys may be assigned to any intercom function including talk, listen , talk/listen, relay, PL, ISO, IFB and SL. The RKP-4 system interfaces directly with ADAM, ADAM-CS, XS-9500, CS-9600, CS-9700, Zeus, and Zeus II.
Note: RKP-4 beltpack rented separately. Optional 12VDC power supply rented separately.
Product Weight: 3.5 lbs
Dimensions: 8.25”W x 1.72"H x 9.00”D
Technical Tools
PDF Documents
- Product Manual - RTS - RKP-4B H1 (280 KB)
- Manufacturer Data Sheet - RTS - RKP-4B H1 (280 KB)
Manufacturer Specs
RF Frequency Range: 482-608 MHz, 614-746 MHz in 18 MHz TX and RX bands
X Antenna: 1/2 Wave (supplied), TNC Male Connector
RX Antenna: 1/2 Wave (supplied), TNC Male Connector
Frequency Response: 100Hz-4.0kHz
Four Wire Input: Level Adjustable (2 Vrms typical)
Four Wire Output: Level Adjustable (2 Vrms typical)
Auxiliary Input: Level Adjustable (2 Vrms typical)
Auxiliary Output: Level Adjustable (2Vrms typical into 600 Ohms)
Microphone input sensitivity: 10 m V (200 Ohm Source)
Local Headset Output: 200 mW output into 150 Ohm (1% Distortion)
Transmitter Type: Synthesized Transmitter, 720 channels
Transmit Power: 50mW typical (High), 5 mW typical (Normal)
Modulation Type: GMSK
Deviation: Complies with FCC 74.861
RF Frequency Stability: 0.005%
Radiated Harmonics & Spurious: Exceeds FCC specifications
Receiver Type: Dual Conversion Superheterodyne, 720 channels each
RF Sensitivity: <0.8 V for 12 dB SINAD
IF Selectivity: 3 dB at 230 kHz
Image Rejection: 70 dB or better
RF Frequency Stability: 0.005%
Distortion: <1% at peak level
S/N Ratio out to Matrix port: 80 dB (30kHz Low Pass Filtered)
FCC ID: B5DM519
Power Requirements: 12-15 Volts AC/DC @ 1 Amp
Temperature Range: -4o F to 130o F
X Antenna: 1/2 Wave (supplied), TNC Male Connector
RX Antenna: 1/2 Wave (supplied), TNC Male Connector
Frequency Response: 100Hz-4.0kHz
Four Wire Input: Level Adjustable (2 Vrms typical)
Four Wire Output: Level Adjustable (2 Vrms typical)
Auxiliary Input: Level Adjustable (2 Vrms typical)
Auxiliary Output: Level Adjustable (2Vrms typical into 600 Ohms)
Microphone input sensitivity: 10 m V (200 Ohm Source)
Local Headset Output: 200 mW output into 150 Ohm (1% Distortion)
Transmitter Type: Synthesized Transmitter, 720 channels
Transmit Power: 50mW typical (High), 5 mW typical (Normal)
Modulation Type: GMSK
Deviation: Complies with FCC 74.861
RF Frequency Stability: 0.005%
Radiated Harmonics & Spurious: Exceeds FCC specifications
Receiver Type: Dual Conversion Superheterodyne, 720 channels each
RF Sensitivity: <0.8 V for 12 dB SINAD
IF Selectivity: 3 dB at 230 kHz
Image Rejection: 70 dB or better
RF Frequency Stability: 0.005%
Distortion: <1% at peak level
S/N Ratio out to Matrix port: 80 dB (30kHz Low Pass Filtered)
FCC ID: B5DM519
Power Requirements: 12-15 Volts AC/DC @ 1 Amp
Temperature Range: -4o F to 130o F