Diamondback II
Telecast
Diamondback II
Telecast Diamondback II 8-Channel NTSC/PAL Video Multiplex with Audio AUX
This unit multiplexes eight broadcast quality NTSC/PAL/SECAM video channels onto one fiber/wavelength. It also has an AUX port that can simultaneously accommodate up to 16 audio channels (from an Adder coax port).
Dual fiber outputs are available for optical redundancy and/or split feeds. Features include: front panel monitoring of any video channel, loop-thru video inputs and dual video outputs. CWDM wavelengths available for high capacity transmission.
Dual fiber outputs are available for optical redundancy and/or split feeds. Features include: front panel monitoring of any video channel, loop-thru video inputs and dual video outputs. CWDM wavelengths available for high capacity transmission.
Product Weight: 5 lbs each end
Dimensions: 16.7"W x 10.5"D x 1.75"H
Technical Tools
PDF Documents
Manufacturer Specs
Video
Interface: RS170, NTSC, PAL
Input/Output Impedance: 75 Ω
Signal to noise ratio, weighted (100kHz-5MHz): > 67 dB
Frequency Response (10 Hz to 5.8 MHz): ± 0.5 dB
Differential Gain: ≤ 2%
Differential Phase: ≤ 0.7°
Electro-Optical
Aggregate Data Rate: 2.4 Gbps
Optical Source: Laser Diode
Recommended Fiber Type: Single-Mode
Connectors
Electrical BNC
Optical ST
Link Margin/Distance
Standard 16 dB/20 km
Optional 22 dB/28 km
Wavelength
Standard: 1300 nm
Optional for WDM: 1550 nm*
*Due to intrinsic fiber dispersion effects at 1550 nm, DFB laser is recommended.
Mechanical/Environmental
Input Voltage: 12-24 VDC
Power Consumption: < 15 Watts
Indicators: Power On, Sync, Audio/Data
Temperature Range: -4°F to +121°F
Humidity Range: 0 to 95% non-condensing
Interface: RS170, NTSC, PAL
Input/Output Impedance: 75 Ω
Signal to noise ratio, weighted (100kHz-5MHz): > 67 dB
Frequency Response (10 Hz to 5.8 MHz): ± 0.5 dB
Differential Gain: ≤ 2%
Differential Phase: ≤ 0.7°
Electro-Optical
Aggregate Data Rate: 2.4 Gbps
Optical Source: Laser Diode
Recommended Fiber Type: Single-Mode
Connectors
Electrical BNC
Optical ST
Link Margin/Distance
Standard 16 dB/20 km
Optional 22 dB/28 km
Wavelength
Standard: 1300 nm
Optional for WDM: 1550 nm*
*Due to intrinsic fiber dispersion effects at 1550 nm, DFB laser is recommended.
Mechanical/Environmental
Input Voltage: 12-24 VDC
Power Consumption: < 15 Watts
Indicators: Power On, Sync, Audio/Data
Temperature Range: -4°F to +121°F
Humidity Range: 0 to 95% non-condensing