PowerMate 1000
Dynacord
PowerMate 1000
Dynacord Powermate 1000 10-Channel Powered Mixer
This powered mixer can also be used as a pure mixer, with power amplifiers every bit as good as dedicated 19“ concert sound amplifiers and studio quality effects specially optimised for live performance.
The mixing section features high-quality, discrete microphone preamps, dustproof ALPS faders specially developed for the PowerMate with very high attenuation even in the HF range, 48V phantom power switchable to the channels in groups of six, and a dynamic range that would put most dedicated professional mixers to shame. AUX 3+4 are separately switchable pre/post fader.
The ultra-efficient Class H power amplifiers deliver 2 x 700 W into 4 ohms and are equipped with dynamic limiters, an extensive range of protections and the LPN filter for excellent bass performance.
Finally, the two digital effects processors offer 99 studio quality presets each and are foot-switchable individually.
Other useful features include two feedback filters, a vocal voicing filter, and a standby switch. Housed in a robust case with a sturdy metal lid, the PowerMate is manufactured in Germany to the highest standards.
The mixing section features high-quality, discrete microphone preamps, dustproof ALPS faders specially developed for the PowerMate with very high attenuation even in the HF range, 48V phantom power switchable to the channels in groups of six, and a dynamic range that would put most dedicated professional mixers to shame. AUX 3+4 are separately switchable pre/post fader.
The ultra-efficient Class H power amplifiers deliver 2 x 700 W into 4 ohms and are equipped with dynamic limiters, an extensive range of protections and the LPN filter for excellent bass performance.
Finally, the two digital effects processors offer 99 studio quality presets each and are foot-switchable individually.
Other useful features include two feedback filters, a vocal voicing filter, and a standby switch. Housed in a robust case with a sturdy metal lid, the PowerMate is manufactured in Germany to the highest standards.
Product Weight: 46.2 lbs including lid
Dimensions: 20.26"W x 8.29"H x 19.86"D
Technical Tools
PDF Documents
Manufacturer Specs
Maximum Midband Output Power, 1 kHz, THD=1%
into 2.66Ω: 2 x 870 W
into 4Ω: 2 x 700 W
into 8Ω: 2 x 430 W
Rated Output Power, THD=0.1%, Single Channel
into 4Ω: 2 x 700 W
into 8Ω: 2 x 350 W
Maximum Output Voltage of power amplifier, no load 70 Vrms, THD at 1kHz, MBW=80kHz
MIC input to Main L/R output, +16 dBu, typical: < 0.005%
Power amplifier input to Speaker L/R output: < 0.01%
DIM 30, power amplifier: < 0.01%
IMD-SMPTE, power amplifier, 60Hz, 7 kHz: < 0.01%
Frequency Response, -3dB ref. 1kHz
Any input to any Mixer output: 15Hz to 80kHz
Any input to Speaker L/R output: 20Hz to 70kHz
Crosstalk, 1kHz
Fader and AUX-Send attenuation: > 85 dB
Channel to channel: > 80 dB
CMRR, MIC input, 1kHz: > 80 dB
Input Sensitivity, all level controls in max. position
MIC input: -74 dBu (155 μV)
LINE Input (Mono): -54 dBu (1.55 mV)
LINE Input (Stereo): -34 dBu (15.5 mV)
Power Amplifier Input: +6 dBu (1.55 V)
Maximum Level, mixing desk
MIC inputs: + 21 dBu
Mono Line inputs: + 41 dBu
Stereo Line inputs: + 30 dBu
All other inputs: + 22 dBu
Record Send output: + 14 dBu
All other outputs: + 22 dBu
Input Impedances
MIC: 2 kΩ
Insert Return: 2.2 kΩ
EQ Input and 2 Track Return: 8 kΩ
All other inputs: > 15 kΩ
Output Impedances
Record Send: 1 kΩ
Phones: 47Ω
All other outputs: 75Ω
Equivalent Input Noise, MIC Input, A-weighted, 150Ω: -130 dBu
Noise, Channel inputs to Main L/R outputs, A-weighted
Master fader down: -95 dBu
Master fader 0 dB, Channel fader down: -90 dBu
Master fader 0 dB, Channel fader 0 dB, Channel gain unity: -83 dBu
Signal/Noise-Ratio, power amplifier, A-weighted: 105 dB
Equalization
LO Shelving: ± 15 dB / 60 Hz
MID Peaking, mono inputs: ± 15 dB / 100 Hz ... 8 kHz
MID Peaking, stereo inputs: ± 12 dB / 2.4 kHz
HI Shelving: ± 15 dB / 12 kHz
Master EQ, 2x7-band, 63, 125, 400, 1k, 2k5, 6k, 12k Hz: ± 10 dB / Q=2.0
Power Consumption at 1/8 maximum output power, 4Ω: 640 W
into 2.66Ω: 2 x 870 W
into 4Ω: 2 x 700 W
into 8Ω: 2 x 430 W
Rated Output Power, THD=0.1%, Single Channel
into 4Ω: 2 x 700 W
into 8Ω: 2 x 350 W
Maximum Output Voltage of power amplifier, no load 70 Vrms, THD at 1kHz, MBW=80kHz
MIC input to Main L/R output, +16 dBu, typical: < 0.005%
Power amplifier input to Speaker L/R output: < 0.01%
DIM 30, power amplifier: < 0.01%
IMD-SMPTE, power amplifier, 60Hz, 7 kHz: < 0.01%
Frequency Response, -3dB ref. 1kHz
Any input to any Mixer output: 15Hz to 80kHz
Any input to Speaker L/R output: 20Hz to 70kHz
Crosstalk, 1kHz
Fader and AUX-Send attenuation: > 85 dB
Channel to channel: > 80 dB
CMRR, MIC input, 1kHz: > 80 dB
Input Sensitivity, all level controls in max. position
MIC input: -74 dBu (155 μV)
LINE Input (Mono): -54 dBu (1.55 mV)
LINE Input (Stereo): -34 dBu (15.5 mV)
Power Amplifier Input: +6 dBu (1.55 V)
Maximum Level, mixing desk
MIC inputs: + 21 dBu
Mono Line inputs: + 41 dBu
Stereo Line inputs: + 30 dBu
All other inputs: + 22 dBu
Record Send output: + 14 dBu
All other outputs: + 22 dBu
Input Impedances
MIC: 2 kΩ
Insert Return: 2.2 kΩ
EQ Input and 2 Track Return: 8 kΩ
All other inputs: > 15 kΩ
Output Impedances
Record Send: 1 kΩ
Phones: 47Ω
All other outputs: 75Ω
Equivalent Input Noise, MIC Input, A-weighted, 150Ω: -130 dBu
Noise, Channel inputs to Main L/R outputs, A-weighted
Master fader down: -95 dBu
Master fader 0 dB, Channel fader down: -90 dBu
Master fader 0 dB, Channel fader 0 dB, Channel gain unity: -83 dBu
Signal/Noise-Ratio, power amplifier, A-weighted: 105 dB
Equalization
LO Shelving: ± 15 dB / 60 Hz
MID Peaking, mono inputs: ± 15 dB / 100 Hz ... 8 kHz
MID Peaking, stereo inputs: ± 12 dB / 2.4 kHz
HI Shelving: ± 15 dB / 12 kHz
Master EQ, 2x7-band, 63, 125, 400, 1k, 2k5, 6k, 12k Hz: ± 10 dB / Q=2.0
Power Consumption at 1/8 maximum output power, 4Ω: 640 W