DCU5D
Yamaha
DCU5D
Yamaha DCU5D Digital Cabling Unit
The DCU5D lets you locate the DSP5D as far as 130 yards from the PM5D console, connected by a single Cat 5 Ethernet cable.
Product Weight: 5.06 lbs
Dimensions: 18.9"W x 5.91"D x 1.73"H
Technical Tools
PDF Documents
- Manufacturer Data Sheet - Yamaha - DCU5D (771 KB)
- Product Manual - Yamaha - DCU5D (771 KB)
Manufacturer Specs
Sampling Frequency
Normal Rate: 42.9975 - 49.200 kHz
Double Rate: 85.995 - 98.400 kHz
Power Requirements: 12 W
Temperature Range
Operation free-air: +50°F to +95°F
Storage: -4°F to +140°F
AC Power Cord Length: 9.84 inches
I/O Characteristics
CASCADE IN, OUT, RS422 level, D-Sub Half Pitch connector 68P(Female)
CASCADE IN, OUT, 100Base-TX leve, RJ-45 connector 1
EXT DC INPUT 2, DC level, XLR-4-32 type connector 3
1. • Use a RJ-45 connector compliant with Neutrik EtherCon ®.
• Use a CAT5 STP (Shielded Twisted Pair) cable compliant with EtherSound.
• Use electrically conductive tape to securely connect the metal part of the connector with the shielded part of the cable in order to prevent electromagnetic interference.
2. max.:+15V, min.:+11.4V, 1.5A
3. 4pin=12V, 1pin = GND
Normal Rate: 42.9975 - 49.200 kHz
Double Rate: 85.995 - 98.400 kHz
Power Requirements: 12 W
Temperature Range
Operation free-air: +50°F to +95°F
Storage: -4°F to +140°F
AC Power Cord Length: 9.84 inches
I/O Characteristics
CASCADE IN, OUT, RS422 level, D-Sub Half Pitch connector 68P(Female)
CASCADE IN, OUT, 100Base-TX leve, RJ-45 connector 1
EXT DC INPUT 2, DC level, XLR-4-32 type connector 3
1. • Use a RJ-45 connector compliant with Neutrik EtherCon ®.
• Use a CAT5 STP (Shielded Twisted Pair) cable compliant with EtherSound.
• Use electrically conductive tape to securely connect the metal part of the connector with the shielded part of the cable in order to prevent electromagnetic interference.
2. max.:+15V, min.:+11.4V, 1.5A
3. 4pin=12V, 1pin = GND