dV-DOSC
L'Acoustics
dV-DOSC
L'Acoustics dV-DOSC Speaker
Speaker
Product Weight: 70.1 lbs
Dimensions: 27.4"W x 10.1"H x 18.7"D
Technical Tools
PDF Documents
Manufacturer Specs
Frequency Response:
Frequency response: 160 - 18k Hz (±3 dB) (2W 75HI preset)
Usable bandwidth: 100 - 20k Hz (-10 dB)
Sensitivity1:
LF (2.83 Vrms @ 1m): 99 dB SPL 100 - 800 Hz
HF (2.83 Vrms @ 1m): 109 dB SPL 800 - 18k Hz
Power Rating2 (Long Term):
LF: 55 Vrms 380 Wrms 1520 Wpeak
HF: 23 Vrms 66 Wrms 260 Wpeak
Amplification (Recommended):
LF: 760 W
HF: 260 W
Impedance (Nominal):
LF: 8 ohms
HF: 8 ohms
Nominal Directivity (-6dB)3:
Horizontal: symmetrical 120°
Vertical: defined by the array
System Output 4:
Continuous SPL (flat array)
One enclosure: 127 dB
Two enclosures: 133 dB
Four enclosures: 139 dB
Continuous SPL (maximum curvature array):
One enclosure: 127 dB
Two enclosures: 131 dB 15° vertical coverage
Four enclosures: 135 dB 30° vertical coverage
Components:
LF: 2 x 8" weather-resistant loudspeaker (2" voice coil)
HF: 1 x 1.4" neodymium compression driver mounted on custom DOSC waveguide and acoustic lens
Enclosure:
Connectors : 2x 4-pin Neutrik speakon
Material : 15 mm, 24 mm Baltic birch plywood, aluminum top and bottom plates
Finish : Maroon-gray™
Grill : Black epoxy perforated steel with acoustically-transparent foam
Rigging : Integrated flying hardware and handles
Additional Equipment:
OEM factory presets for approved digital processors
L-ACOUSTICS dV-SUB or SB218 subwoofers
L-ACOUSTICS LA24a or LA48a power amplifier
Notes:
1. Sensitivity is the average SPL measured over the component’s rated bandwidth
2. Power rating displays the long term RMS power handling capacity using pink noise with a 6 dB crest factor over the component’s rated bandwidth
3. Directivity is averaged over the 1-10 kHz range
4. System Output gives the unweighted SPL output of the system referenced to 1 m, including preset equalization and band leveling adjustment as measured under freefield conditions using the 2W 75LO preset
Frequency response: 160 - 18k Hz (±3 dB) (2W 75HI preset)
Usable bandwidth: 100 - 20k Hz (-10 dB)
Sensitivity1:
LF (2.83 Vrms @ 1m): 99 dB SPL 100 - 800 Hz
HF (2.83 Vrms @ 1m): 109 dB SPL 800 - 18k Hz
Power Rating2 (Long Term):
LF: 55 Vrms 380 Wrms 1520 Wpeak
HF: 23 Vrms 66 Wrms 260 Wpeak
Amplification (Recommended):
LF: 760 W
HF: 260 W
Impedance (Nominal):
LF: 8 ohms
HF: 8 ohms
Nominal Directivity (-6dB)3:
Horizontal: symmetrical 120°
Vertical: defined by the array
System Output 4:
Continuous SPL (flat array)
One enclosure: 127 dB
Two enclosures: 133 dB
Four enclosures: 139 dB
Continuous SPL (maximum curvature array):
One enclosure: 127 dB
Two enclosures: 131 dB 15° vertical coverage
Four enclosures: 135 dB 30° vertical coverage
Components:
LF: 2 x 8" weather-resistant loudspeaker (2" voice coil)
HF: 1 x 1.4" neodymium compression driver mounted on custom DOSC waveguide and acoustic lens
Enclosure:
Connectors : 2x 4-pin Neutrik speakon
Material : 15 mm, 24 mm Baltic birch plywood, aluminum top and bottom plates
Finish : Maroon-gray™
Grill : Black epoxy perforated steel with acoustically-transparent foam
Rigging : Integrated flying hardware and handles
Additional Equipment:
OEM factory presets for approved digital processors
L-ACOUSTICS dV-SUB or SB218 subwoofers
L-ACOUSTICS LA24a or LA48a power amplifier
Notes:
1. Sensitivity is the average SPL measured over the component’s rated bandwidth
2. Power rating displays the long term RMS power handling capacity using pink noise with a 6 dB crest factor over the component’s rated bandwidth
3. Directivity is averaged over the 1-10 kHz range
4. System Output gives the unweighted SPL output of the system referenced to 1 m, including preset equalization and band leveling adjustment as measured under freefield conditions using the 2W 75LO preset