dV-SUB
L'Acoustics
dV-SUB
L'Acoustics dV-SUB Subwoofer
This is the companion subwoofer for dV-DOSC™ and features three 15-inch transducers loaded in a dual-chamber vented bandpass configuration.
With power handling capacity of 1200 Wrms and response to 35 Hz, dV-SUB is ideal for applications requiring maximum low-end impact from an extremely compact enclosure.
With power handling capacity of 1200 Wrms and response to 35 Hz, dV-SUB is ideal for applications requiring maximum low-end impact from an extremely compact enclosure.
Product Weight: 205 lbs
Dimensions: 27.9"H x 27.4"W x 27.4"D
Technical Tools
PDF Documents
Manufacturer Specs
Frequency Response
Frequency Response: 40 - 200 Hz (± 3 dB) (3W 200 preset)
Usable Low Frequency: 35 Hz (-10 dB)
Recommended filtering
80 to 200 Hz (4th order low pass filter)
30 Hz (4th order high pass filter)
Sensitivity1
(2.83 Vrms @ 1m) 104.5 dB SPL 40 - 200 Hz
Power Rating (Long term)2: 57 Vrms, 1200 Wrms, 4800 Wpeak
Amplification (Recommended): 2400 W
Impedance (Nominal): 2.7Ω
Array3 SPL
One enclosure 133 dB (cont) 139 db (peak) (3W 200 preset)
Two enclosures 139 dB (cont) 145 db (peak)
Four enclosures 145 dB (cont) 151 db (peak)
Components
Low Frequency 3 x 15" weather-resistant loudspeaker
(3” edgewound copper ribbon voice coil, diecast aluminum basket, massive vented magnet structure, high thermal capacity)
• Connectors: 1x 4-pin Neutrik Speakon
• Material: 24 mm Baltic birch plywood
• Finish : Maroon-gray™
• Grill : Black epoxy coated perforated steel with acoustically transparent foam
• Rigging : Integral flying hardware and handles
Notes
1 Sensitivity is the average SPL measured over the system’s rated bandwidth.
2 Power rating displays the long term RMS power handling using pink noise with a 6 dB crest factor over the system’s rated bandwidth.
3 Array data gives the continuous unweighted SPL output of the system under half space conditions, referenced to 1 m, including preset equalization.
Frequency Response: 40 - 200 Hz (± 3 dB) (3W 200 preset)
Usable Low Frequency: 35 Hz (-10 dB)
Recommended filtering
80 to 200 Hz (4th order low pass filter)
30 Hz (4th order high pass filter)
Sensitivity1
(2.83 Vrms @ 1m) 104.5 dB SPL 40 - 200 Hz
Power Rating (Long term)2: 57 Vrms, 1200 Wrms, 4800 Wpeak
Amplification (Recommended): 2400 W
Impedance (Nominal): 2.7Ω
Array3 SPL
One enclosure 133 dB (cont) 139 db (peak) (3W 200 preset)
Two enclosures 139 dB (cont) 145 db (peak)
Four enclosures 145 dB (cont) 151 db (peak)
Components
Low Frequency 3 x 15" weather-resistant loudspeaker
(3” edgewound copper ribbon voice coil, diecast aluminum basket, massive vented magnet structure, high thermal capacity)
• Connectors: 1x 4-pin Neutrik Speakon
• Material: 24 mm Baltic birch plywood
• Finish : Maroon-gray™
• Grill : Black epoxy coated perforated steel with acoustically transparent foam
• Rigging : Integral flying hardware and handles
Notes
1 Sensitivity is the average SPL measured over the system’s rated bandwidth.
2 Power rating displays the long term RMS power handling using pink noise with a 6 dB crest factor over the system’s rated bandwidth.
3 Array data gives the continuous unweighted SPL output of the system under half space conditions, referenced to 1 m, including preset equalization.