VRX932LA
JBL
VRX932LA
JBL VRX932LA 12" Line Array Speaker
This light-weight, compact 12" two-way line array speaker is designed for arrays of up to six units in mid-sized venues.
The Constant Curvature waveguide mounts three compression drivers on a continuous arc. When additional VRX932LA speakers are added to the array the uninterrupted arc continues; all drivers work together to make the combined power handling and acoustic output of the system far greater than a single driver could achieve.
“Amplitude shading” shapes the coverage of the array. Switches on the input plate allow the array’s upper box to reach a distant balcony while the lower HF section is shaded back to reduce excessive level at the front of the listening area.
One or two VRX932LAs may also be used on a tripod or over subwoofers. Integral rigging hardware securely locks the array together while the dual-angle pole socket provides aiming flexibility. As many as six VRX932LA speakers may be suspended in a single array for a nominal vertical coverage of up to 90°.
The Constant Curvature waveguide mounts three compression drivers on a continuous arc. When additional VRX932LA speakers are added to the array the uninterrupted arc continues; all drivers work together to make the combined power handling and acoustic output of the system far greater than a single driver could achieve.
“Amplitude shading” shapes the coverage of the array. Switches on the input plate allow the array’s upper box to reach a distant balcony while the lower HF section is shaded back to reduce excessive level at the front of the listening area.
One or two VRX932LAs may also be used on a tripod or over subwoofers. Integral rigging hardware securely locks the array together while the dual-angle pole socket provides aiming flexibility. As many as six VRX932LA speakers may be suspended in a single array for a nominal vertical coverage of up to 90°.
Product Weight: 48 lbs
Dimensions: 13.75”H x 23.5”W x 15.0”D
Technical Tools
PDF Documents
Manufacturer Specs
Frequency Range (-10 dB)1: 57 Hz - 20 kHz
Frequency Response (±3 dB)1: 75 Hz - 20 kHz
Coverage Pattern: 100° x 15° nominal
Crossover Modes: Bi-amp / passive, externally switchable
Crossover Frequency: 1.2 kHz
Power Rating Passive: 800 W / 1600 W / 3200 W
(Continuous/Program Peak)2: Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF: 75 W / 150 W / 300 W
System Maximum SPL2: 130 dB SPL peak (passive mode)
LF: 130 dB
HF: 139 dB
System Sensitivity (1w @ 1m): 95 dB SPL (passive mode)
LF: 95 dB
HF: 114 dB3
LF Driver: 1 x JBL 2262H 305 mm (12 in) Differential Drive® woofer with
neodymium-magnet, dual voice-coils and magnetic gap.
HF Driver: 3 x JBL 2407J, 25.4 mm (1.0 in) voice-coil, neodymium
compression driver
Nominal Impedance: Passive: 8 ohm
Bi-amp LF: 8 ohms
Bi-amp HF: 8 ohms
Active Tunings: Tunings available at www.jblpro.com
Enclosure: 18 mm, 11-ply birch plywood.
Suspension/Mounting: Optional VRX-AF line array frame kit; M-10 Eyebolt Kit
Finish: Black DuraFlex™ finish
Grille: Powder coated, black, 16-gauge perforated steel with acoustically
transparent foam
Input Connectors: Neutrik® Speakon® NL-4 (x2)
Optional Accessories: VRX-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole
M-10 eyebolt kit
1 “Frequency Range” and “Frequency Response” are based on half-space conditions
2 IEC filtered noise with 6 dB crest factor, 2 hrs.
3 HF driver sensitivity is based on a measurements averaged between 1.5 kHz-16 kHz
Frequency Response (±3 dB)1: 75 Hz - 20 kHz
Coverage Pattern: 100° x 15° nominal
Crossover Modes: Bi-amp / passive, externally switchable
Crossover Frequency: 1.2 kHz
Power Rating Passive: 800 W / 1600 W / 3200 W
(Continuous/Program Peak)2: Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF: 75 W / 150 W / 300 W
System Maximum SPL2: 130 dB SPL peak (passive mode)
LF: 130 dB
HF: 139 dB
System Sensitivity (1w @ 1m): 95 dB SPL (passive mode)
LF: 95 dB
HF: 114 dB3
LF Driver: 1 x JBL 2262H 305 mm (12 in) Differential Drive® woofer with
neodymium-magnet, dual voice-coils and magnetic gap.
HF Driver: 3 x JBL 2407J, 25.4 mm (1.0 in) voice-coil, neodymium
compression driver
Nominal Impedance: Passive: 8 ohm
Bi-amp LF: 8 ohms
Bi-amp HF: 8 ohms
Active Tunings: Tunings available at www.jblpro.com
Enclosure: 18 mm, 11-ply birch plywood.
Suspension/Mounting: Optional VRX-AF line array frame kit; M-10 Eyebolt Kit
Finish: Black DuraFlex™ finish
Grille: Powder coated, black, 16-gauge perforated steel with acoustically
transparent foam
Input Connectors: Neutrik® Speakon® NL-4 (x2)
Optional Accessories: VRX-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole
M-10 eyebolt kit
1 “Frequency Range” and “Frequency Response” are based on half-space conditions
2 IEC filtered noise with 6 dB crest factor, 2 hrs.
3 HF driver sensitivity is based on a measurements averaged between 1.5 kHz-16 kHz