25AV
JBL
25AV
JBL Control 25AV Indoor/Outdoor Speaker
This speaker uses a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker. Premium performance capability and even coverage ensures excellent sound quality throughout the listening area.
The Control 25AV can be used full range, or low frequencies can be further augmented by adding a subwoofer.
Magnetic shielding allows use of the speaker in close proximity to video monitors. The top-quality transformer, with reduced saturation, allows use on either 70 volt or 100 volt distributed speaker lines, with similar performance fidelity. In the bypass position, the high 8 Ω impedance allows use of more speakers on a loudspeaker line.
JBL’s exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full fidelity sound.
The Control 25AV can be used full range, or low frequencies can be further augmented by adding a subwoofer.
Magnetic shielding allows use of the speaker in close proximity to video monitors. The top-quality transformer, with reduced saturation, allows use on either 70 volt or 100 volt distributed speaker lines, with similar performance fidelity. In the bypass position, the high 8 Ω impedance allows use of more speakers on a loudspeaker line.
JBL’s exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full fidelity sound.
Product Weight: 9 lbs
Dimensions: 9.3"H x 7.4"W x 6.3"D
Technical Tools
PDF Documents
- Manufacturer Data Sheet - JBL - 25AV (455 KB)
Manufacturer Specs
Freq. Range (-10 dB)1: 70 Hz - 23 kHz
Midrange (±1.5 dB typical)2: 130 Hz - 14 kHz
100 Hour Power Capacity3:
200 Watts Continuous Program Power
100 Watts Continuous Pink Noise
Nominal Coverage: 100° x 100°
Nominal Sensitivity4: 87 dB SPL, 1W @ 1 m (3.3ft)
Maximum SPL @ 1m:
113 dB continuous peak pink noise
107 dB continuous average pink noise
103 dB continuous average music or speech
Directivity Factor (Q): 4.9 dB, averaged 500 Hz to 4 kHz
Directivity Index (DI): 6.9 dB, averaged 500 Hz to 4 kHz
Nominal Impedance: 8 Ω
Minimum Impedance: 6.7 Ω at 230 Hz
Crossover Type: Second Order Lowpass, Second Order Highpass, Optimization for Maximally Flat Response
Transformer Taps:
70V: 60W, 30W, 15W, 7.5W taps (Taps #4,#3, #2 & #1)
100V: 60W, 30W, 15W taps (Taps #3, #2, & #1)
Thru position: 8 Ω nominal
Transducers:
Low-Frequency: 5.25" polypropylene-coated paper with WeatherEdge surround, 1" voicecoil on kapton former
High-Frequency: 0.75" titanium coated PEI
Physical:
Enclosure Material: High Impact polystyrene
Grille: Painted stainless steel, black or white to match cabinet
Overload Protection:
Full-range power limiting to protect network and transducers.
Internal fuse to protect during exceptional overload condition
Environmental: Exceeds Mil Spec 810 for humidity, salt spray, 529 IP-X4 splashproof rating
Termination:
Screw-down terminal strip, zinc-plated copper base, metal screws/washers.
Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10).
Safety Agency Rating: Transformer is listed per UL1876
Rotation: Against wall on InvisiBall Base: 37° vertical 44° horizontal
On bracket: 44° all directions
Midrange (±1.5 dB typical)2: 130 Hz - 14 kHz
100 Hour Power Capacity3:
200 Watts Continuous Program Power
100 Watts Continuous Pink Noise
Nominal Coverage: 100° x 100°
Nominal Sensitivity4: 87 dB SPL, 1W @ 1 m (3.3ft)
Maximum SPL @ 1m:
113 dB continuous peak pink noise
107 dB continuous average pink noise
103 dB continuous average music or speech
Directivity Factor (Q): 4.9 dB, averaged 500 Hz to 4 kHz
Directivity Index (DI): 6.9 dB, averaged 500 Hz to 4 kHz
Nominal Impedance: 8 Ω
Minimum Impedance: 6.7 Ω at 230 Hz
Crossover Type: Second Order Lowpass, Second Order Highpass, Optimization for Maximally Flat Response
Transformer Taps:
70V: 60W, 30W, 15W, 7.5W taps (Taps #4,#3, #2 & #1)
100V: 60W, 30W, 15W taps (Taps #3, #2, & #1)
Thru position: 8 Ω nominal
Transducers:
Low-Frequency: 5.25" polypropylene-coated paper with WeatherEdge surround, 1" voicecoil on kapton former
High-Frequency: 0.75" titanium coated PEI
Physical:
Enclosure Material: High Impact polystyrene
Grille: Painted stainless steel, black or white to match cabinet
Overload Protection:
Full-range power limiting to protect network and transducers.
Internal fuse to protect during exceptional overload condition
Environmental: Exceeds Mil Spec 810 for humidity, salt spray, 529 IP-X4 splashproof rating
Termination:
Screw-down terminal strip, zinc-plated copper base, metal screws/washers.
Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10).
Safety Agency Rating: Transformer is listed per UL1876
Rotation: Against wall on InvisiBall Base: 37° vertical 44° horizontal
On bracket: 44° all directions