EON10 G2
JBL
EON10 G2
JBL EON10 G2 Speaker
This speaker has more power than the first generation EON10, with 125 watts for low frequencies and 50 watts for the highs. The 10" Differential Drive low frequency driver uses a neodymium magnet for light weight and reduced distortion. The one-inch JBL 2412 compression driver for the high frequencies includes a titanium diaphragm and ferro-fluid cooling.
Product Weight: 23 lbs
Dimensions: 19.4"H x 14.0"W x 12.1"D
Technical Tools
PDF Documents
- Manufacturer Data Sheet - JBL - EON10 G2 (593 KB)
- Product Manual - JBL - EON10 G2 (593 KB)
Manufacturer Specs
Frequency Range (-10 dB): 65 Hz - 18 kHz
Frequency Response (±3 dB): 90 Hz - 16 kHz
Horizontal Coverage (-6 dB): 90° Nominal
Vertical Coverage (-6 dB): 60° Nominal
Rated Maximum SPL: 117 dB, @ 1 m (3.3 ft)
LF Driver: Integral frame with one 10˝ (254 mm) driver, neodymium magnet, 1.5˝ Differential Drive voice coil.
HF Driver: JBL 2412 1˝ compression driver, titanium diaphragm, ferro-fluid cooled.
Amplifier Power LF: 125 watts @ low-frequency driver impedance.
Amplifier Power HF: 50 watts @ high-frequency driver impedance.
Input 1 Sensitivity:
-48 dBu to 0 dBu for rated output (Mic/Line switch in MIC position)
-6 dBu to +20 dBu for rated output (Mic/Line switch in LINE position)
Input 2 & 3 Sensitivity: -12 dBu to +20 dBu for rated output
Output Level: +26 dBu (max), Loop/Mix switch in MIX position
Crossover Frequency: 2.7 kHz
Loop/Mix Out: XLR/M, balanced
AC Input: 110-230 VAC, 50-60 Hz, 110 watts rating per UL, detachable IEC power cable.
Frequency Response (±3 dB): 90 Hz - 16 kHz
Horizontal Coverage (-6 dB): 90° Nominal
Vertical Coverage (-6 dB): 60° Nominal
Rated Maximum SPL: 117 dB, @ 1 m (3.3 ft)
LF Driver: Integral frame with one 10˝ (254 mm) driver, neodymium magnet, 1.5˝ Differential Drive voice coil.
HF Driver: JBL 2412 1˝ compression driver, titanium diaphragm, ferro-fluid cooled.
Amplifier Power LF: 125 watts @ low-frequency driver impedance.
Amplifier Power HF: 50 watts @ high-frequency driver impedance.
Input 1 Sensitivity:
-48 dBu to 0 dBu for rated output (Mic/Line switch in MIC position)
-6 dBu to +20 dBu for rated output (Mic/Line switch in LINE position)
Input 2 & 3 Sensitivity: -12 dBu to +20 dBu for rated output
Output Level: +26 dBu (max), Loop/Mix switch in MIX position
Crossover Frequency: 2.7 kHz
Loop/Mix Out: XLR/M, balanced
AC Input: 110-230 VAC, 50-60 Hz, 110 watts rating per UL, detachable IEC power cable.