EON15 G2
JBL
EON15 G2
JBL EON15 G2 Powered Speaker
This speaker delivers 300 watts of power to a 15" neodymium Differential Drive® LF driver. The driver boasts a dual neodymium magnet and dual voice coil motor that efficiently delivers high output from a lightweight woofer. Meanwhile, the HF amplifier delivers 100 watts of power to a 1.75" titanium diaphragm compression driver with Ferro-fluid cooling.
Technical Tools
PDF Documents
- Manufacturer Data Sheet - JBL - EON15 G2 (398 KB)
- Product Manual - JBL - EON15 G2 (398 KB)
Manufacturer Specs
Frequency Range (-10 dB): 39 Hz - 18 kHz
Frequency Response (±3 dB): 42 Hz - 17 kHz
Horizontal Coverage (-6 dB): 90° Nominal
Vertical Coverage (-6 dB): 60° Nominal
Rated Maximum SPL: 129 dB,@ 1 m (3.3 ft)
LF Driver: Integral frame with one 15˝ (380 mm) driver, dual neodymium magnet, 2˝ differential drive voice-coil.
HF Driver: JBL 2418H-1 1˝ (throat diameter) compression driver with 1.75˝ diameter titanium diaphragm. Ferro-fluid cooled.
Amplifier Power LF: 300 watts @ low-frequency driver impedance.
Amplifier Power HF: 100 watts @ high-frequency driver impedance.
Input 1 Sensitivity:
-44 dBu to -22 dBu for rated output (Mic/Line switch in MIC position)
-12 dBu to +20 dBu for rated output (Mic/Line switch in LINE position)
Input 2 & 3 Sensitivity: -18 dBu to +20 dBu for rated output
Output Level: +20 dBu (peak), Loop/Mix switch in MIX position
Audio Connectors:
•Input 1: XLR/F, balanced
•Input 2 & 3: 1/4˝ Phone, balanced (TRS)
Crossover Freq: 1.5 kHz
Limiting: Low frequency amplifier controlled by dynamic filter
Loop/Mix Out: XLR/M, balanced
EQ: High Frequency Shelving, ±15 dB @ 5 kHz; Low Frequency Shelving, ±15 dB @ 120 Hz
AC Input: 110 - 230 VAC, 50 - 60 Hz., 175 watts rating per UL, detachable IEC power cable
Frequency Response (±3 dB): 42 Hz - 17 kHz
Horizontal Coverage (-6 dB): 90° Nominal
Vertical Coverage (-6 dB): 60° Nominal
Rated Maximum SPL: 129 dB,@ 1 m (3.3 ft)
LF Driver: Integral frame with one 15˝ (380 mm) driver, dual neodymium magnet, 2˝ differential drive voice-coil.
HF Driver: JBL 2418H-1 1˝ (throat diameter) compression driver with 1.75˝ diameter titanium diaphragm. Ferro-fluid cooled.
Amplifier Power LF: 300 watts @ low-frequency driver impedance.
Amplifier Power HF: 100 watts @ high-frequency driver impedance.
Input 1 Sensitivity:
-44 dBu to -22 dBu for rated output (Mic/Line switch in MIC position)
-12 dBu to +20 dBu for rated output (Mic/Line switch in LINE position)
Input 2 & 3 Sensitivity: -18 dBu to +20 dBu for rated output
Output Level: +20 dBu (peak), Loop/Mix switch in MIX position
Audio Connectors:
•Input 1: XLR/F, balanced
•Input 2 & 3: 1/4˝ Phone, balanced (TRS)
Crossover Freq: 1.5 kHz
Limiting: Low frequency amplifier controlled by dynamic filter
Loop/Mix Out: XLR/M, balanced
EQ: High Frequency Shelving, ±15 dB @ 5 kHz; Low Frequency Shelving, ±15 dB @ 120 Hz
AC Input: 110 - 230 VAC, 50 - 60 Hz., 175 watts rating per UL, detachable IEC power cable