CDi 2000
Crown
CDi 2000
Crown CDi 2000 70V Amplifier
This professional tool is designed and built for installed sound applications. It is rugged and lightweight, offering unmatched value in its class.
Its intuitive front-panel LCD screen ensures quick, easy configuration, and onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Up to 20 user defined DSP presets are available.
Its intuitive front-panel LCD screen ensures quick, easy configuration, and onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Up to 20 user defined DSP presets are available.
Product Weight: 19 lbs
Dimensions: 19"W x 3.5"H x 12.25" D
Technical Tools
PDF Documents
Manufacturer Specs
Minimum Guaranteed Power (With 0.5% THD)
Per channel, both channels driven
2 Ω Dual (per channel): 1,000W*
4 Ω Dual (per channel): 800W
8 Ω Dual (per channel): 475W
4 Ω Bridge-Mono: 2,000W*
70V Dual (per channel): 800W
140V Bridge-Mono: 1,600W
*With 1% THD
Frequency Response (at 1 watt into 4 Ω, 20Hz - 20 kHz): +0/–1 dB
Signal to Noise Ratio (below rated 8 Ω power at 1 kHz, A-weighted): 100 dB
Damping Factor (8 Ω): 20 Hz to 400 Hz: > 500
Input Stage: Input is electronically balanced and employs precision 1% resistors
Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB
Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads)
Dual: 2–8 Ω
Bridge mono: 4–16 Ω
Voltage Gain (at 1 kHz, 8 Ω rated output): 32.9 dB
Sensitivity (at 8 Ω rated output): 1.4V
Maximum Input Signal: +22 dBu typical
Power Supply: Switch-mode Universal
AC Line Voltage and Frequency Configurations Available (± 10%): 100V, 120V-240V, 50/60 Hz
AC Line Current: 11.93A. Draws no more than 45W at idle.
Ventilation: Flow-through ventilation from front to back
Cooling: Heat sinks and proportional-speed fan
Operating Temperature: 32°F to 104°F at 95% relative humidity (non-condensing)
Per channel, both channels driven
2 Ω Dual (per channel): 1,000W*
4 Ω Dual (per channel): 800W
8 Ω Dual (per channel): 475W
4 Ω Bridge-Mono: 2,000W*
70V Dual (per channel): 800W
140V Bridge-Mono: 1,600W
*With 1% THD
Frequency Response (at 1 watt into 4 Ω, 20Hz - 20 kHz): +0/–1 dB
Signal to Noise Ratio (below rated 8 Ω power at 1 kHz, A-weighted): 100 dB
Damping Factor (8 Ω): 20 Hz to 400 Hz: > 500
Input Stage: Input is electronically balanced and employs precision 1% resistors
Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB
Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads)
Dual: 2–8 Ω
Bridge mono: 4–16 Ω
Voltage Gain (at 1 kHz, 8 Ω rated output): 32.9 dB
Sensitivity (at 8 Ω rated output): 1.4V
Maximum Input Signal: +22 dBu typical
Power Supply: Switch-mode Universal
AC Line Voltage and Frequency Configurations Available (± 10%): 100V, 120V-240V, 50/60 Hz
AC Line Current: 11.93A. Draws no more than 45W at idle.
Ventilation: Flow-through ventilation from front to back
Cooling: Heat sinks and proportional-speed fan
Operating Temperature: 32°F to 104°F at 95% relative humidity (non-condensing)