I-T8000
Crown
I-T8000
Crown I-T8000 Power Amp
This amp's patented class-I technology and integrated studio-quality processing reduces DSP noise for a quiet overall system, and peak voltage and RMS power limiting protect your speaker investment.
The I-T8000's front panel LCD provides diagnostics and preset selection to ensure fast and easy system setup, while front panel lockout allows tunings and presets to be safely stored and protected from curious users.
Remote monitoring and control provide enable system control anywhere in the venue.
The I-T8000's front panel LCD provides diagnostics and preset selection to ensure fast and easy system setup, while front panel lockout allows tunings and presets to be safely stored and protected from curious users.
Remote monitoring and control provide enable system control anywhere in the venue.
Product Weight: 28 lbs
Dimensions: 19.0"W x 3.5"H x 16.2"D behind front mounting surface
Technical Tools
PDF Documents
Manufacturer Specs
Performance
Minimum Guaranteed Power, 20 Hz - 20 kHz with 0.35% THD
Stereo, 2 Ω (per ch.): 3500W
Stereo, 4 Ω (per ch.): 4000W
Stereo, 8 Ω (per ch.): 2100W
Bridge mono, 4 Ω: 7000W
Bridge mono, 8 Ω: 8000W
Input Sensitivity (volts RMS) for rated output: Adjustable in 0.1V steps from 1.4V to 7.75V
Voltage Gain for full rated power at 8 Ω: 39.3 dB to 24.5 dB
Frequency Response (at 1 watt, 20Hz - 20 kHz): ± 0.25 dB
Signal to Noise Ratio below rated full-bandwidth power, A-weighted: > 105 dB
Total Harmonic Distortion (THD) at full rated power: < 0.35%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to -35 dB : < 0.35%
Maximum Input Level: +15 dBu or +21 dBu, depending on setting of maximum input level
Latency (analog, digital inputs):
Analog: 1.13 mS.
Digital:
Sample rate Latency
32 kHz: 2.74 mS
44.1 kHz: 2.36 mS
48 kHz: 2.28 mS
96 kHz: 1.81 mS
A/D, D/A Converters: 24-bit 96 kHz Cirrus Logic
Digital Input: AES/EBU, 24-bit, 32-96 kHz. Onboard sample rate converter.
Network:Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware
DSP: 24-bit conversion with 32-bit, floating-point DSP processing
Attenuators: Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to -100 dB
Damping Factor (8 Ω): 20 Hz to 100 Hz: > 5000
Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 50 dB
DC Output Offset (Shorted input):< ± 3 mV
Input Impedance (nominal): 20 kilohms balanced, 10 kΩ unbalanced
Load Impedance (Note: Safe with all types of loads)
Stereo: 1-2-4-8-16 Ω
Bridge Mono: 2-4-8 Ω
Required AC Mains: Universal AC input, 100-240VAC (±10%), 50/60 Hz. Max. AC mains voltage 264VAC.
AC Line Connector: USA, UK, European, Australia, India
Construction
Ventilation: Flow-through ventilation from front to back
Cooling: Dual-zone, microprocessor controlled, continuously variable speed fans
Minimum Guaranteed Power, 20 Hz - 20 kHz with 0.35% THD
Stereo, 2 Ω (per ch.): 3500W
Stereo, 4 Ω (per ch.): 4000W
Stereo, 8 Ω (per ch.): 2100W
Bridge mono, 4 Ω: 7000W
Bridge mono, 8 Ω: 8000W
Input Sensitivity (volts RMS) for rated output: Adjustable in 0.1V steps from 1.4V to 7.75V
Voltage Gain for full rated power at 8 Ω: 39.3 dB to 24.5 dB
Frequency Response (at 1 watt, 20Hz - 20 kHz): ± 0.25 dB
Signal to Noise Ratio below rated full-bandwidth power, A-weighted: > 105 dB
Total Harmonic Distortion (THD) at full rated power: < 0.35%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to -35 dB : < 0.35%
Maximum Input Level: +15 dBu or +21 dBu, depending on setting of maximum input level
Latency (analog, digital inputs):
Analog: 1.13 mS.
Digital:
Sample rate Latency
32 kHz: 2.74 mS
44.1 kHz: 2.36 mS
48 kHz: 2.28 mS
96 kHz: 1.81 mS
A/D, D/A Converters: 24-bit 96 kHz Cirrus Logic
Digital Input: AES/EBU, 24-bit, 32-96 kHz. Onboard sample rate converter.
Network:Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware
DSP: 24-bit conversion with 32-bit, floating-point DSP processing
Attenuators: Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to -100 dB
Damping Factor (8 Ω): 20 Hz to 100 Hz: > 5000
Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 50 dB
DC Output Offset (Shorted input):< ± 3 mV
Input Impedance (nominal): 20 kilohms balanced, 10 kΩ unbalanced
Load Impedance (Note: Safe with all types of loads)
Stereo: 1-2-4-8-16 Ω
Bridge Mono: 2-4-8 Ω
Required AC Mains: Universal AC input, 100-240VAC (±10%), 50/60 Hz. Max. AC mains voltage 264VAC.
AC Line Connector: USA, UK, European, Australia, India
Construction
Ventilation: Flow-through ventilation from front to back
Cooling: Dual-zone, microprocessor controlled, continuously variable speed fans