ACS-101
Telex
ACS-101
Telex ACS-101 10x UHF Antenna Combiner-Splitter
This amplified and filtered broadband device allows up to ten UHF base stations to use only one transmit and one receive antenna.
The antenna combiner section contains innovative hybrid coupling, amplifying and matching technology to combine ten transmitters to one output with very low intermod distortion.
The antenna splitter section has broadband input filtering and amplification to maintain signal levels through the splitters.
High output isolation between ports is also achieved. The industrial strength power supply of the ACS-101 supplies voltage and current to two outputs on the product. Each output can supply up to 5 amps at 12 VDC.
The antenna combiner section contains innovative hybrid coupling, amplifying and matching technology to combine ten transmitters to one output with very low intermod distortion.
The antenna splitter section has broadband input filtering and amplification to maintain signal levels through the splitters.
High output isolation between ports is also achieved. The industrial strength power supply of the ACS-101 supplies voltage and current to two outputs on the product. Each output can supply up to 5 amps at 12 VDC.
Product Weight: 10.25 lbs
Shipping Dimensions (In Case): 16.75”W x 3.50”H x 14.63”D, rack mountable
Technical Tools
PDF Documents
- Manufacturer Data Sheet - Telex - ACS-101 (171 KB)
- Product Manual - Telex - ACS-101 (171 KB)
Manufacturer Specs
Antenna Connectors: Standard TNC Receptacles
Antenna Splitter
Frequency Range: 614 - 746 MHz
Output IP3: Greater than 30 dBm
Net Gain: 0 dB Typical
Noise Figure: Less than 4.5 dB
Minimum Isolation
20 dB between adjacent ports.
>20 dB between non-adjacent ports
Antenna Combiner
Frequency Range: 470 - 608 MHz
Net Gain: 0 dB (Maximum)
Noise Figure: 10 dB Typical
Output IP3: -55 dBc @ + 17 dBm input on each transmitter
Power
AC Input Power: 100 - 120 VAC, 60 Hz, 6A max
AC Input Fuse: 10A, 250V, 3AG
DC Output Power: 12 VDC, 5A for each output
DC Output Jacks: Two, 5.5mm x 2.1mm Jacks
DC Output Fuses: 5A, 250V, 5mm x 20mm
Antenna Splitter
Frequency Range: 614 - 746 MHz
Output IP3: Greater than 30 dBm
Net Gain: 0 dB Typical
Noise Figure: Less than 4.5 dB
Minimum Isolation
20 dB between adjacent ports.
>20 dB between non-adjacent ports
Antenna Combiner
Frequency Range: 470 - 608 MHz
Net Gain: 0 dB (Maximum)
Noise Figure: 10 dB Typical
Output IP3: -55 dBc @ + 17 dBm input on each transmitter
Power
AC Input Power: 100 - 120 VAC, 60 Hz, 6A max
AC Input Fuse: 10A, 250V, 3AG
DC Output Power: 12 VDC, 5A for each output
DC Output Jacks: Two, 5.5mm x 2.1mm Jacks
DC Output Fuses: 5A, 250V, 5mm x 20mm