ADX-2400N
Lance
ADX-2400N
Lance ADX-2400N Audio Distribution/Delay with Analog I/O
This is the analog version of the ADX system. It shares the same functionality with the AES version, but the I/0 is line-level balanced analog, using D-25F connectors.
This system utilizes high-performance Analog Devices A/D converters for optimum analog-to-digital conversion. The D/A converters are 24-bit, low-distortion low-noise devices, followed by 3-pole active filters and low-noise line drivers. The analog performance more than meets the requirements for professional broadcast or sound reinforcement audio.
All signal processing is 24-bit, and the Cobranet transmission is 20-bit, with a 48Khz sample rate. A front-panel configuration and status menu provides easy setup, and user memories are available if multiple configurations are required.
Status monitoring provides display of Cobranet receiver and transmitter status, network error rates, internal temperature, and external reference status. Flashing front panel alarms are provided for over-temp and network error conditions.
Audio input and output use D-25 female connectors, wired to the industry-standard Tascam/Protools pinout. Installation is quick and easy using widely available standard breakout cables, extension cables, and pre-wired jackfields with matching connectors.
This system utilizes high-performance Analog Devices A/D converters for optimum analog-to-digital conversion. The D/A converters are 24-bit, low-distortion low-noise devices, followed by 3-pole active filters and low-noise line drivers. The analog performance more than meets the requirements for professional broadcast or sound reinforcement audio.
All signal processing is 24-bit, and the Cobranet transmission is 20-bit, with a 48Khz sample rate. A front-panel configuration and status menu provides easy setup, and user memories are available if multiple configurations are required.
Status monitoring provides display of Cobranet receiver and transmitter status, network error rates, internal temperature, and external reference status. Flashing front panel alarms are provided for over-temp and network error conditions.
Audio input and output use D-25 female connectors, wired to the industry-standard Tascam/Protools pinout. Installation is quick and easy using widely available standard breakout cables, extension cables, and pre-wired jackfields with matching connectors.
Dimensions: 19"W x 15"D x 1.75"H (1 RU)
Technical Tools
PDF Documents
- Product Manual - Lance - ADX-2400N (290 KB)
Manufacturer Specs
Local Input Channels
24 Balanced Analog
+4dBv Nominal
+24dBv Maximum
3 X D-25F Connectors
Input Impedance: Approx. 25KΩ, Balanced to Ground
Local Output Channels
24 Balanced Analog
+4dBv Nominal
+24dBv Maximum
3 X D-25F Connectors
Output Impedance: Approx. 50Ω, Active Differential, Balanced to Ground
THD+Noise: <0.02% Input to Output or through Audio Network
Signal-to-Noise Ratio: >100dB below peak level, bandwidth-limited to 25KHz
A/D and D/A Conversion: 24-Bit, 48KHz
Digital Processing and Delay: 24-Bit Uncompressed, 48KHz
Cobranet Transmission Format: 20-Bit Uncompressed, 48KHz
Audio Network Format
100base/T Ethernet
Industry-standard Cobranet format
Cobranet TX/RX Capability: 24 channels transmit and 24 channels receive simultaneously.
Level Adjustment Range: -Infinity (off) to +12dB relative to Unity
Adjustable Delay Range: 0 Milliseconds to 680 Milliseconds (>20 Video Frames), each output independently-adjustable
Minimum Delay (Local In/Out): 1.5 Milliseconds
Minimum Delay Through Network
6.5 Milliseconds (Normal Mode)
3.5 Milliseconds (Low-latency Mode)
Headphone Jack: 1/4" TRS, Stereo, Low-Impedance
VU Meter
Conventional VU Ballistics (300ms)
-20 to +3.5 dB Scale
Meter and Headphone Jack follow Output Selection.
Power Requirements: 95 to 250 Volts AC, 50-60Hz, 20 Watts
24 Balanced Analog
+4dBv Nominal
+24dBv Maximum
3 X D-25F Connectors
Input Impedance: Approx. 25KΩ, Balanced to Ground
Local Output Channels
24 Balanced Analog
+4dBv Nominal
+24dBv Maximum
3 X D-25F Connectors
Output Impedance: Approx. 50Ω, Active Differential, Balanced to Ground
THD+Noise: <0.02% Input to Output or through Audio Network
Signal-to-Noise Ratio: >100dB below peak level, bandwidth-limited to 25KHz
A/D and D/A Conversion: 24-Bit, 48KHz
Digital Processing and Delay: 24-Bit Uncompressed, 48KHz
Cobranet Transmission Format: 20-Bit Uncompressed, 48KHz
Audio Network Format
100base/T Ethernet
Industry-standard Cobranet format
Cobranet TX/RX Capability: 24 channels transmit and 24 channels receive simultaneously.
Level Adjustment Range: -Infinity (off) to +12dB relative to Unity
Adjustable Delay Range: 0 Milliseconds to 680 Milliseconds (>20 Video Frames), each output independently-adjustable
Minimum Delay (Local In/Out): 1.5 Milliseconds
Minimum Delay Through Network
6.5 Milliseconds (Normal Mode)
3.5 Milliseconds (Low-latency Mode)
Headphone Jack: 1/4" TRS, Stereo, Low-Impedance
VU Meter
Conventional VU Ballistics (300ms)
-20 to +3.5 dB Scale
Meter and Headphone Jack follow Output Selection.
Power Requirements: 95 to 250 Volts AC, 50-60Hz, 20 Watts