D1030
Yamaha
D1030
Yamaha D1030 Speaker Delay
This device features conversion technology that improves dynamic range and enhances low-level signal performance.
Product Weight: 8.38 lbs
Dimensions: 18.88"W x 1.75"H x 12.75"D (1 RU)
Technical Tools
PDF Documents
Manufacturer Specs
Performance
Dynamic range: >100 dB
THD: <0.03%
Bandwidth: 20 kHz bandwidth
Frequency Response: 20Hz - 20kHz
Inputs
Number of Inputs: 1 (Electronically balanced)
Nominal Level: +4dBm
Input Impedance: 10kΩ
Maximum Input Level: +18dBm
Outputs
Number of Outputs: 3 (Electronically Balanced)
Nominal Level: +4dBm
Output Impedance: 150Ω
Maximum output level: +18dBm
A/D, D/A Conversion
A/D Conversion Type: Delta-Sigma
Quantization: 18 bits
Sampling Rate: 50kHz
Delay Time: 0 - 1.3 sec. (20 mm/sec steps), displayed in milliseconds, meters or feet
Memory
Number of Locations: 15:1-9 and A-F
1-9: Delay +3 band PEQ
A-F: Delay + Crossover
External Control Connector: 9-pin D-SUB (contact closure memory select)
Indicators
Level Meter: Input / Output 1-3
Memory Number: 7-segment LED
Parameter: 18-characters x 2-line, backlit
Digital Equalization System Modes
Independent 3-band parametric EQ for each delay output
Three-way frequency divider with delay for each output
Two-way frequency divider plus low-pass filter with delay for all outputs
Two-way frequency divider plus band pass channel with delay for all outputs
Attenuation: Independently programmable attenuation, up to 50 dB and mutes each delay channel.
MIDI Interface: for memory select parameter adjust, and memory up/down loading.
Power Requirements
US and Canadian Models: 120V 50/60Hz
General Model: 220-240V 50/60Hz
Power Consumption: 22W
Dynamic range: >100 dB
THD: <0.03%
Bandwidth: 20 kHz bandwidth
Frequency Response: 20Hz - 20kHz
Inputs
Number of Inputs: 1 (Electronically balanced)
Nominal Level: +4dBm
Input Impedance: 10kΩ
Maximum Input Level: +18dBm
Outputs
Number of Outputs: 3 (Electronically Balanced)
Nominal Level: +4dBm
Output Impedance: 150Ω
Maximum output level: +18dBm
A/D, D/A Conversion
A/D Conversion Type: Delta-Sigma
Quantization: 18 bits
Sampling Rate: 50kHz
Delay Time: 0 - 1.3 sec. (20 mm/sec steps), displayed in milliseconds, meters or feet
Memory
Number of Locations: 15:1-9 and A-F
1-9: Delay +3 band PEQ
A-F: Delay + Crossover
External Control Connector: 9-pin D-SUB (contact closure memory select)
Indicators
Level Meter: Input / Output 1-3
Memory Number: 7-segment LED
Parameter: 18-characters x 2-line, backlit
Digital Equalization System Modes
Independent 3-band parametric EQ for each delay output
Three-way frequency divider with delay for each output
Two-way frequency divider plus low-pass filter with delay for all outputs
Two-way frequency divider plus band pass channel with delay for all outputs
Attenuation: Independently programmable attenuation, up to 50 dB and mutes each delay channel.
MIDI Interface: for memory select parameter adjust, and memory up/down loading.
Power Requirements
US and Canadian Models: 120V 50/60Hz
General Model: 220-240V 50/60Hz
Power Consumption: 22W