DN9848
Klark Teknik
DN9848
Klark Teknik DN9848 Processor
Product Weight: 8.8 lbs
Dimensions: 1.75"H x 19"W x 12"D, (1RU)
Technical Tools
PDF Documents
Manufacturer Specs
Digital Inputs: Two 2-Channel Inputs
Type: AES / EBU
Impedance: 110Ω
Sample Rate 96kHz*, 88.2kHz*, 48kHz, 44.1kHz*
Word Length 24-bit or 16-bit
*SRC Input at these sample rates
Analog Inputs: Four
Type: Electronically balanced (Pin 2 Hot)
Impedance
Balanced: 20kΩ
Unbalanced: 10kΩ
Common Mode Rejection: >80dB @ 1kHz
Maximum level: + 21dBu
Audio Outputs: Eight
Type: Electronically Balanced (Pin 2 Hot)
Minimum load impedance: 56Ω/20nF
Source impedance: 56Ω
Maximum level: + 21dBu into > 2kΩ
Performance
Frequency response: 20 Hz to 20 kHz +/- 0.3dB with all filters and EQ flat
Distortion (THD+N): <0.02% @ 1kHz, +8dBu
Dynamic range (20Hz to 20kHz unweighted): >114dB
Input Processing (per channel)
Input gain: +12dB to -40dB in 0.1 dB steps plus Off
Parametric EQ 1-12 frequency range: 20Hz to 20kHz in 21 steps per octave
Boost/cut: +6/-18dB in 0.1dB steps
Q: 3.0 to 0.08
Compressor
Threshold: +21dBu to -10dBu in 0.1dB steps
Attack:: 40μs to 100ms
Insert:: On/Off
Release: 10ms to 2000ms
Ratio: 1:1 to 5:1
Knee: Hard/Soft
Delay: 0 to 1 second
342.25 m or 1122’ 10” at 20(C) in 20.8μs steps
Output Processing (per channel)
Routing
Full featured matrix mixing: any combination of inputs can be routed to any output in .1dB steps from 0dB to -40dB and OFF.
Delay: 0 to 300ms (102.68m or 333’ 10” at 20(C)in 5.02μs steps)
Phase correction filters: 0˚ to 180˚ in 5˚ steps
All pass filter:1st and 2nd order
Low pass filter frequency range: 20Hz to 20kHz in 21 steps per octave
Supported configurations:
Butterworth (6dB/Oct, 12dB/Oct, 18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
Linkwitz-Riley (12dB/Oct, 24dB/Oct)
Bessel (12dB/Oct,18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
High pass filter frequency range: 20Hz to 20kHz in 21steps per octave
Supported configurations
12dB/Oct Peaking
24dB/Oct Peaking
Butterworth (6dB/Oct, 12dB/Oct, 18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
Linkwitz-Riley (12 dB/Oct, 24dB/Oct)
Bessel (12dB/Oct,18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
Peaking Filter Boost: 0dB to +6dB in 0.1dB steps
Parametric EQ 1: frequency range 20Hz to 20kHz in 21steps per octave
Low shelf filter
Boost/cut: +12/-12dB in 0.1dB steps
Parametric EQ Q: 3.0 to 0.08
Shelf slope: 6dB/Oct and 12dB/Oct
Parametric EQ 2-5: frequency range 20Hz to 20kHz in 21steps per octave
Boost/cut: +12/-12dB in 0.1dB steps
Q: 3.0 to 0.08
Parametric EQ 6: frequency range 20Hz to 20kHz in 21steps per octave
Hi shelf filter
Boost/cut: +12/-12dB in 0.1dB steps
Parametric EQ Q: 3.0 to 0.08
Shelf slope: 6 dB/Oct and 12dB/Oct
Polarity invert: Normal/invert
Output gain: +12dB to -40dB in 0.5dB steps plus Off
Look-ahead limiter
Threshold: +21dBu to -10dBu in 0.5dB steps
Release: 10ms to 1000ms
Knee: Hard/Soft
Compressor
Threshold: +21dBu to -10dBu in 0.1dB steps
Attack: 40μs to 100ms
Insert: On/Off
Release: 10ms to 2000ms
Ratio: 1:1 to 5:1
Knee: Hard/Soft
Mute: On/off
Terminations
Audio inputs/outputs: 3 pin XLR
Ethernet inputs/outputs: Ethercon
RS-232: 8-pin Mini-DIN socket
Power: 3-pin IEC
Power Requirements
Voltage / Consumption: 100V to 240VAC ±10%, 50/60Hz, < 60VA
Type: AES / EBU
Impedance: 110Ω
Sample Rate 96kHz*, 88.2kHz*, 48kHz, 44.1kHz*
Word Length 24-bit or 16-bit
*SRC Input at these sample rates
Analog Inputs: Four
Type: Electronically balanced (Pin 2 Hot)
Impedance
Balanced: 20kΩ
Unbalanced: 10kΩ
Common Mode Rejection: >80dB @ 1kHz
Maximum level: + 21dBu
Audio Outputs: Eight
Type: Electronically Balanced (Pin 2 Hot)
Minimum load impedance: 56Ω/20nF
Source impedance: 56Ω
Maximum level: + 21dBu into > 2kΩ
Performance
Frequency response: 20 Hz to 20 kHz +/- 0.3dB with all filters and EQ flat
Distortion (THD+N): <0.02% @ 1kHz, +8dBu
Dynamic range (20Hz to 20kHz unweighted): >114dB
Input Processing (per channel)
Input gain: +12dB to -40dB in 0.1 dB steps plus Off
Parametric EQ 1-12 frequency range: 20Hz to 20kHz in 21 steps per octave
Boost/cut: +6/-18dB in 0.1dB steps
Q: 3.0 to 0.08
Compressor
Threshold: +21dBu to -10dBu in 0.1dB steps
Attack:: 40μs to 100ms
Insert:: On/Off
Release: 10ms to 2000ms
Ratio: 1:1 to 5:1
Knee: Hard/Soft
Delay: 0 to 1 second
342.25 m or 1122’ 10” at 20(C) in 20.8μs steps
Output Processing (per channel)
Routing
Full featured matrix mixing: any combination of inputs can be routed to any output in .1dB steps from 0dB to -40dB and OFF.
Delay: 0 to 300ms (102.68m or 333’ 10” at 20(C)in 5.02μs steps)
Phase correction filters: 0˚ to 180˚ in 5˚ steps
All pass filter:1st and 2nd order
Low pass filter frequency range: 20Hz to 20kHz in 21 steps per octave
Supported configurations:
Butterworth (6dB/Oct, 12dB/Oct, 18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
Linkwitz-Riley (12dB/Oct, 24dB/Oct)
Bessel (12dB/Oct,18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
High pass filter frequency range: 20Hz to 20kHz in 21steps per octave
Supported configurations
12dB/Oct Peaking
24dB/Oct Peaking
Butterworth (6dB/Oct, 12dB/Oct, 18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
Linkwitz-Riley (12 dB/Oct, 24dB/Oct)
Bessel (12dB/Oct,18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
Peaking Filter Boost: 0dB to +6dB in 0.1dB steps
Parametric EQ 1: frequency range 20Hz to 20kHz in 21steps per octave
Low shelf filter
Boost/cut: +12/-12dB in 0.1dB steps
Parametric EQ Q: 3.0 to 0.08
Shelf slope: 6dB/Oct and 12dB/Oct
Parametric EQ 2-5: frequency range 20Hz to 20kHz in 21steps per octave
Boost/cut: +12/-12dB in 0.1dB steps
Q: 3.0 to 0.08
Parametric EQ 6: frequency range 20Hz to 20kHz in 21steps per octave
Hi shelf filter
Boost/cut: +12/-12dB in 0.1dB steps
Parametric EQ Q: 3.0 to 0.08
Shelf slope: 6 dB/Oct and 12dB/Oct
Polarity invert: Normal/invert
Output gain: +12dB to -40dB in 0.5dB steps plus Off
Look-ahead limiter
Threshold: +21dBu to -10dBu in 0.5dB steps
Release: 10ms to 1000ms
Knee: Hard/Soft
Compressor
Threshold: +21dBu to -10dBu in 0.1dB steps
Attack: 40μs to 100ms
Insert: On/Off
Release: 10ms to 2000ms
Ratio: 1:1 to 5:1
Knee: Hard/Soft
Mute: On/off
Terminations
Audio inputs/outputs: 3 pin XLR
Ethernet inputs/outputs: Ethercon
RS-232: 8-pin Mini-DIN socket
Power: 3-pin IEC
Power Requirements
Voltage / Consumption: 100V to 240VAC ±10%, 50/60Hz, < 60VA