REV-500
Yamaha
REV-500
Yamaha REV-500 Reverberator
This unit is extremely easy to use, with a large custom LCD display and dedicated rotary controls for the four most critical reverb parameters. Its 20-bit AD/DA oversampling converters and independent left and right channels ensure superb sonic performance, and a dual level control and two four-segment LED level meters simplify level setting for optimal performance.
Snare and rim shot samples are built in, so programs and edits can be auditioned directly from the front panel (AUDITION button), while balanced XLR and phone jack connections allow simple hookup to professional or semiprofessional gear. Input and output levels for each channel are independently switchable between -10dB and +4dB.
REV500 supports real-time parameter control via MIDI Control Changes and program selection via MIDI Program Changes. MIDI Bulk Dump is used for user program backup. Reverb programs are categorized into groups for selection ease. The 100 preset programs and 100 user programs are divided into four categories: Hall, Room, Plate and Special.
Snare and rim shot samples are built in, so programs and edits can be auditioned directly from the front panel (AUDITION button), while balanced XLR and phone jack connections allow simple hookup to professional or semiprofessional gear. Input and output levels for each channel are independently switchable between -10dB and +4dB.
REV500 supports real-time parameter control via MIDI Control Changes and program selection via MIDI Program Changes. MIDI Bulk Dump is used for user program backup. Reverb programs are categorized into groups for selection ease. The 100 preset programs and 100 user programs are divided into four categories: Hall, Room, Plate and Special.
Technical Tools
PDF Documents
- Product Manual - Yamaha - REV500 (555 KB)
Manufacturer Specs
Audio
Frequency Response: 20Hz - 20kHz (+1, -2dB)
Dynamic Range: 96dB typical, greater than 90dB
Noise Level: Less than -72dB (IHF-A Filter)
THD: Less than 0.03% (1kHz @max. level, CD 20kHz LPF filter)
AD/DA Conversion
AD: 20-bit, 64-times oversampling
DA: 20-bit 8-times oversampling
Sampling Rate: 44.1 kHz
MIDI Control: Program Change, Control Change, Parameter Change, Bulk Dump
Memories
Preset: HALL 1-25, ROOM 1-25, PLATE 1-25, SPECIAL 1-25
User: HALL 1-25, ROOM 1-25, PLATE 1-25, SPECIAL 1-25
Inputs
Connector: XLR-3-31 type x 2, phone jack x 2
Nominal Level: +4/-10dB switchable
Impedance: 20 kΩ
Outputs
Connector: XLR-3-32 type x 2, phone jack x 2
Nominal Level: +4/-10 dB switchable
Impedance: 150 Ω
Front Panel
Controls: INPUT LEVEL, PRE DELAY, REV TIME, HI-RATIO, ER LEVEL
Buttons: TYPE, PRESET/USER, -, +, STORE, AUDITION, EFF LEVEL, UTILITY; LCD; Custom LCD
LED: Two four-segment level meters, UTILITY, EFF LEVEL;
Switches: POWER
Rear Panel
Connectors: INPUT L/R (XLR x 2, phone jack x 2), OUTPUT L/R (XLR x 2, phonejack x 2), FOOT SWITCH (phone jack), MIDI IN, MIDI OUT,(5-pin DIN x 2)
Switches: INPUT LEVEL (+4/-10 Db), OUTPUT LEVEL (+4/-10 Db)
Frequency Response: 20Hz - 20kHz (+1, -2dB)
Dynamic Range: 96dB typical, greater than 90dB
Noise Level: Less than -72dB (IHF-A Filter)
THD: Less than 0.03% (1kHz @max. level, CD 20kHz LPF filter)
AD/DA Conversion
AD: 20-bit, 64-times oversampling
DA: 20-bit 8-times oversampling
Sampling Rate: 44.1 kHz
MIDI Control: Program Change, Control Change, Parameter Change, Bulk Dump
Memories
Preset: HALL 1-25, ROOM 1-25, PLATE 1-25, SPECIAL 1-25
User: HALL 1-25, ROOM 1-25, PLATE 1-25, SPECIAL 1-25
Inputs
Connector: XLR-3-31 type x 2, phone jack x 2
Nominal Level: +4/-10dB switchable
Impedance: 20 kΩ
Outputs
Connector: XLR-3-32 type x 2, phone jack x 2
Nominal Level: +4/-10 dB switchable
Impedance: 150 Ω
Front Panel
Controls: INPUT LEVEL, PRE DELAY, REV TIME, HI-RATIO, ER LEVEL
Buttons: TYPE, PRESET/USER, -, +, STORE, AUDITION, EFF LEVEL, UTILITY; LCD; Custom LCD
LED: Two four-segment level meters, UTILITY, EFF LEVEL;
Switches: POWER
Rear Panel
Connectors: INPUT L/R (XLR x 2, phone jack x 2), OUTPUT L/R (XLR x 2, phonejack x 2), FOOT SWITCH (phone jack), MIDI IN, MIDI OUT,(5-pin DIN x 2)
Switches: INPUT LEVEL (+4/-10 Db), OUTPUT LEVEL (+4/-10 Db)