DN410
Klark Teknik
DN410
Klark Teknik DN410 Parametric Equalizer
This dual-channel device features five filters per channel, with all bands fully configurable between 20Hz and 20kHz. Each filter offers cut and boost of –25dB and +15dB respectively, with available bandwidth settings of 1/12th to 2 octaves.
Further, it may be configured (via a front panel switch) to be a single channel of ten filters if required. It is fitted with high and low pass filters for each channel and signal relays that ensure that audio signal reaches the outputs even in the event of power loss. All filters are individually switched in and out of circuit, plus an overall channel bypass switch is fitted.
DN410s are found in many applications, most commonly in theatre or AV situations where omnidirectional lavalier or lectern microphones are used.
Further, it may be configured (via a front panel switch) to be a single channel of ten filters if required. It is fitted with high and low pass filters for each channel and signal relays that ensure that audio signal reaches the outputs even in the event of power loss. All filters are individually switched in and out of circuit, plus an overall channel bypass switch is fitted.
DN410s are found in many applications, most commonly in theatre or AV situations where omnidirectional lavalier or lectern microphones are used.
Product Weight: 11 lbs
Dimensions: 19"W x 9.25"D x 3.5"H (2RU)
Technical Tools
PDF Documents
Manufacturer Specs
Inputs: Two
Type: Electronically balanced (pin 3 hot)
Impedance
Balanced: 20kΩ
Unbalanced: 10kΩ
Outputs: Two
Type: Unbalanced (pin 3 hot)
Min. load impedance: 600 Ω
Source impedance: <60 Ω
Max. level: +22dBu
Performance
Frequency response: 20Hz-20kHz
EQ in (flat): ± 1dB
EQ out: ± 1dB
Distortion (THD+N): < 0.01% @ 1 kHz, +4dBu
Equivalent input noise (20Hz-20kHz unweighted): <-94dBu
Channel separation: >75dB @ 1kHz
Gain: -∞ to +6dB
Overload indicator: +19dBu
Filters
Type: Parametric (2x5)
Bandwidth: Variable from 1/12 ~ 2 octaves
Max. boost/cut: +15/-25dB
Frequency ranges: 20Hz-200Hz / 200Hz-2kHz / 2kHz-20kHz
High Pass filter: 15Hz-300Hz / 12dB octave
Lower Pass filter: 2k5Hz-30kHz / 12dB octave
Terminations
Input: 3-pin XLR
Output: 3-pin XLR
Power: 3-pin IEC
Power Requirements
Voltage: 115/230V 50-60Hz
Consumption: <15VA
Type: Electronically balanced (pin 3 hot)
Impedance
Balanced: 20kΩ
Unbalanced: 10kΩ
Outputs: Two
Type: Unbalanced (pin 3 hot)
Min. load impedance: 600 Ω
Source impedance: <60 Ω
Max. level: +22dBu
Performance
Frequency response: 20Hz-20kHz
EQ in (flat): ± 1dB
EQ out: ± 1dB
Distortion (THD+N): < 0.01% @ 1 kHz, +4dBu
Equivalent input noise (20Hz-20kHz unweighted): <-94dBu
Channel separation: >75dB @ 1kHz
Gain: -∞ to +6dB
Overload indicator: +19dBu
Filters
Type: Parametric (2x5)
Bandwidth: Variable from 1/12 ~ 2 octaves
Max. boost/cut: +15/-25dB
Frequency ranges: 20Hz-200Hz / 200Hz-2kHz / 2kHz-20kHz
High Pass filter: 15Hz-300Hz / 12dB octave
Lower Pass filter: 2k5Hz-30kHz / 12dB octave
Terminations
Input: 3-pin XLR
Output: 3-pin XLR
Power: 3-pin IEC
Power Requirements
Voltage: 115/230V 50-60Hz
Consumption: <15VA