DA6
Drawmer
DA6
Drawmer DA6 6-Channel Stereo Audio D/A
This is a 6-channel stereo (or 12-channel mono) distribution amplifier featuring XLR balanced inputs and outputs with optional transformer balancing where remote amplifiers and recorders are fed from separate power supplies.
The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 2 x mono input/12 x mono output unit or any combination of the two.
The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further DA-6 units for the distribution of even more channels.
The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 2 x mono input/12 x mono output unit or any combination of the two.
The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further DA-6 units for the distribution of even more channels.
Technical Tools
PDF Documents
- Product Manual - Drawmer - DA6 (77 KB)
Manufacturer Specs
Input Impedance:15K Ohms
Output Impedance:33 Ohms (electronically balanced)
Maximum Input Level: Bal. +23.5dB Unbal. +18dB
Maximum Output Level: Bal. +22.5dB Unbal. +17.5dB into 600 Ohms
Headphone Amplifier: 1 Watt into 8Ω
Headphone Impedance: 8Ω to 600Ω
Noise: Better than -95dB ( Gain=0dB @ 22Hz - 22KHz)
Crosstalk: > -90dB @ 10KHz (Input grounded, any channel output)
Distortion: @ 1KHz Output
0dB: 0.008%
+10dB: 0.008%
+20dB: 0.015%
Bandwidth: 18Hz to 32Khz -1dB
Transformer Option
Outputs fitted with the specified BEYERDYNAMIC transformer will have the following specification:
Max. Output Level: +18.8dB into 600 Ohms.
Distortion @ 1kHz
0dB: 0.008%
+10dB: 0.01%
+15dB: 0.05%
Bandwidth 10k Load
Output 0dB:
18Hz to 58kHz (-3dB point)
25Hz to 34kHz (-1dB point)
Output +10dB:
66Hz to 58kHz (-3dB point)
87Hz to 34kHz (-1dB points)
Bandwidth 600Ω Load
Output 0dB:
22Hz to 22kHz (-3dB point)
31Hz to 12kHz (-1dB point)
Output +10dB:
82Hz to 22kHz (-3dB point)
109Hz to 12kHz (-1dB point)
The Beyerdynamic transformer has a load dependent insertion loss of 4dBs into 600 (0.3dB into 10k ). The transformer output is optimised for loads between 600 and 1M in parallel with a capacitance of 5pF to 150pF.
Power Requirements: 115Volt or 230Volt at 50-60Hz, 30 Watts
Output Impedance:33 Ohms (electronically balanced)
Maximum Input Level: Bal. +23.5dB Unbal. +18dB
Maximum Output Level: Bal. +22.5dB Unbal. +17.5dB into 600 Ohms
Headphone Amplifier: 1 Watt into 8Ω
Headphone Impedance: 8Ω to 600Ω
Noise: Better than -95dB ( Gain=0dB @ 22Hz - 22KHz)
Crosstalk: > -90dB @ 10KHz (Input grounded, any channel output)
Distortion: @ 1KHz Output
0dB: 0.008%
+10dB: 0.008%
+20dB: 0.015%
Bandwidth: 18Hz to 32Khz -1dB
Transformer Option
Outputs fitted with the specified BEYERDYNAMIC transformer will have the following specification:
Max. Output Level: +18.8dB into 600 Ohms.
Distortion @ 1kHz
0dB: 0.008%
+10dB: 0.01%
+15dB: 0.05%
Bandwidth 10k Load
Output 0dB:
18Hz to 58kHz (-3dB point)
25Hz to 34kHz (-1dB point)
Output +10dB:
66Hz to 58kHz (-3dB point)
87Hz to 34kHz (-1dB points)
Bandwidth 600Ω Load
Output 0dB:
22Hz to 22kHz (-3dB point)
31Hz to 12kHz (-1dB point)
Output +10dB:
82Hz to 22kHz (-3dB point)
109Hz to 12kHz (-1dB point)
The Beyerdynamic transformer has a load dependent insertion loss of 4dBs into 600 (0.3dB into 10k ). The transformer output is optimised for loads between 600 and 1M in parallel with a capacitance of 5pF to 150pF.
Power Requirements: 115Volt or 230Volt at 50-60Hz, 30 Watts