RA62c
Rolls
RA62c
Rolls RA62c Headphone Amplifier
This six-channel headphone/earphone amplifier for professional audio monitoring features a variety of input options, including 1/4”, RCA, and balanced XLR. Since the MONO/STEREO switch is after the pan control, it will mix 2 MONO signals and their balance can be adjusted with the Pan control. With the addition of rear panel Direct Input connectors, each channel may mix a second stereo signal.
Product Weight: 7 lbs
Dimensions: 19”W x 6.5”D x 1.75”H (1RU)
Technical Tools
PDF Documents
Manufacturer Specs
Input Impedance: 10KΩ unbalanced
Max Input Level: +18 dBV
Input Connectors
1/4" TRS stereo
R & L balanced / unbalanced 1/4" RCA
R & L balanced XLR
1/4" TRS Direct Input jacks: 6
Outputs
1/4" TRS Stereo jacks: 12
1/8" (3.5 mm) TRS Stereo jacks: 6
Max Gain: 20 dB/Channel
Max Output Power: up to 300 mW/side, 600 mW/Channel @ 16Ω
Frequency Response: DC - 30 kHz
S/N Ratio: 90 dB
THD: <.008%
IMD: <.008%
Phase Shift (In to Out): 0 deg.
Slew Rate: 25 V per microsecond Second
Crosstalk: - 65 dB
Power: 12 VAC (Rolls Model PS12)
Max Input Level: +18 dBV
Input Connectors
1/4" TRS stereo
R & L balanced / unbalanced 1/4" RCA
R & L balanced XLR
1/4" TRS Direct Input jacks: 6
Outputs
1/4" TRS Stereo jacks: 12
1/8" (3.5 mm) TRS Stereo jacks: 6
Max Gain: 20 dB/Channel
Max Output Power: up to 300 mW/side, 600 mW/Channel @ 16Ω
Frequency Response: DC - 30 kHz
S/N Ratio: 90 dB
THD: <.008%
IMD: <.008%
Phase Shift (In to Out): 0 deg.
Slew Rate: 25 V per microsecond Second
Crosstalk: - 65 dB
Power: 12 VAC (Rolls Model PS12)