DriveRack 260
dbx
DriveRack 260
dbx DriveRack 260 Equalization and Loudspeaker System
This system provides state-of-the-art signal processing with a simple and intuitive user interface. It combines two independent channels of processing power with a linkable 28-Band Graphic Equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input. Its six-channel output system includes parametric EQs, PeakStopPlus® limiters (to provide protection against speaker blowouts) and alignment delay.
These features, combined with the Wizard setup system and complete DriveWare™ GUI control, deliver optimal, all-inclusive processing in a completely scalable system.
These features, combined with the Wizard setup system and complete DriveWare™ GUI control, deliver optimal, all-inclusive processing in a completely scalable system.
Product Weight: 5.5 lbs
Dimensions: 1.75"H x 5.75"D x 19"W
Technical Tools
PDF Documents
Manufacturer Specs
Analog Inputs
Number of Inputs: (2) Line inputs. (1) RTA Mic input
Connectors: (2) Female XLR line inputs. XLR RTA Mic input
Type: Electronically balanced/RF filtered
Impedance: >40k ohm
Maximum Input Level: +34dBu with input jumpers in +30 position
CMRR: >45 dB
RTA Mic Phantom Voltage: +15 VDC
RTA Mic ETN: <-110 dBu, 22 Hz - 22 kHz, 150Ω
Analog Outputs
Number of Outputs: 6
Connectors: Male XLR
Type: Electronically balanced, RF filtered
Impedance: 120Ω
Max Output Level: +22dBu
A/D Performance
Type: dbx Type IV™ Conversion System
Dynamic Range line: >114 dB A-weighted, >112 dB unweighted
Type IV™ dynamic range: >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW
Sample Rate: 48kHz
D/A Performance
Dynamic Range: 112 dB A-unweighted, 110 dB unweighted
System Performance
Dynamic Range: 110 dB unweighted, >107 dB weighted
THD + Noise: 0.002% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency Response: 20 Hz - 20 kHz, +/-0.5 dB
Interchannel Crosstalk: >110 dB, 120 dB typical
Crosstalk input-output: >100 dB
Power Supply
Operating Voltage
DO: 100-120VAC 50/60 Hz
EU: 220-240 VAC 56/60 Hz
Power Requirements: 25 Watts
Physical
Weight: 5.5 lbs.(2.5 kg)
Dimensions: 1.75” H x 5.75” D x 19” W
General
Approvals: IEC, UL and CSA Approvals
Number of Inputs: (2) Line inputs. (1) RTA Mic input
Connectors: (2) Female XLR line inputs. XLR RTA Mic input
Type: Electronically balanced/RF filtered
Impedance: >40k ohm
Maximum Input Level: +34dBu with input jumpers in +30 position
CMRR: >45 dB
RTA Mic Phantom Voltage: +15 VDC
RTA Mic ETN: <-110 dBu, 22 Hz - 22 kHz, 150Ω
Analog Outputs
Number of Outputs: 6
Connectors: Male XLR
Type: Electronically balanced, RF filtered
Impedance: 120Ω
Max Output Level: +22dBu
A/D Performance
Type: dbx Type IV™ Conversion System
Dynamic Range line: >114 dB A-weighted, >112 dB unweighted
Type IV™ dynamic range: >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW
Sample Rate: 48kHz
D/A Performance
Dynamic Range: 112 dB A-unweighted, 110 dB unweighted
System Performance
Dynamic Range: 110 dB unweighted, >107 dB weighted
THD + Noise: 0.002% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency Response: 20 Hz - 20 kHz, +/-0.5 dB
Interchannel Crosstalk: >110 dB, 120 dB typical
Crosstalk input-output: >100 dB
Power Supply
Operating Voltage
DO: 100-120VAC 50/60 Hz
EU: 220-240 VAC 56/60 Hz
Power Requirements: 25 Watts
Physical
Weight: 5.5 lbs.(2.5 kg)
Dimensions: 1.75” H x 5.75” D x 19” W
General
Approvals: IEC, UL and CSA Approvals