Reply CRS930
Fleetwood
Reply CRS930
Adding keypads to an existing Base Station requires them to be set to new, unused addresses. No change is required on the Base Station when keypads of the same radio channel are added.
The Base Station scans each keypad in sequence for a duration of 1/100th of a second. Within each brief time slice, it simultaneously determines a keypad’s identification and processes its response information.
This “look, listen, verify” routine is both intelligent and fast. Polling cycles are adjustable for optimizing speed to group size. For example, a group of 50 keypads can be sampled every one-half second, whereas an audience of 2,000 per room or site can be sampled every 3 seconds.
The base station is controlled by a high-performance microprocessor and external permanent memory for storage of setup parameters and keypad addresses.
Product Weight: 3.5 lbs including cable and power supply
Dimensions: 7.8”W x 6.4”D x 3.4”H
Manufacturer Specs
Channels: 8, user-selectable
Connectors
Base Station: RJ45
PC: DB9
35' serial cable
Power Supply
Input: 110-220 VAC
Output: 12 VDC
Current draw: less than 0.5 A
Compliance: UL/CSA
FCC Rules and Regulations Part 15 certified.
IC RSS121 certified.