MasterCue V5 USB
Interspace Industries
MasterCue V5 USB
Interspace Industries V-Man Mastercue V5 Package
This is the cueing system of choice for AV professionals. The wireless remote cue system allows full presenter mobility on stage whilst hard-wired remotes provide backup for totally assured cueing. The system is easily installed using standard 3-pin XLR (mic) cables and the rugged design has proven to stand up to the most rigorous industrial use.
MasterCue V5 USB displays cues visually as well as producing audible cue sounds via the in-built speaker or headphone output. The USB interface can control PowerPoint if required and dual button remote controls allow the presenter to signal ‘forward’ or ‘back’ cues.
MasterCue V5 USB displays cues visually as well as producing audible cue sounds via the in-built speaker or headphone output. The USB interface can control PowerPoint if required and dual button remote controls allow the presenter to signal ‘forward’ or ‘back’ cues.
Product Weight: 2.31 lbs (main unit)
Dimensions: 9.2”W x 4.4”D x 3”H (main unit)
Technical Tools
PDF Documents
Manufacturer Specs
Signals:
RF 433Mhz
Audio on 600Ω 1Vp-p Variable
RF Signal type: FSK modulation
RF Receiver Connectors:
BNC for aerial
Female XLR
Main Unit Connectors:
Male 3-pin XLR for RF receiver connection
Female 3-pin XLRs for each of the wired remotes
Audio intercom loop-through using 1 male and 1 female 4-pin XLRs
1/4” jack socket for balanced audio output
PS/2 style keyboard connector for keyboard programming
B-type USB connector
IEC mains power input
Power:
International Power Supply 100-240VAC 1.0A max
47-63Hz IEC connector
Accessories Included:
2 Wireless remotes
1 RF receiver
1 Aerial
2 Hard-wired remotes
1 USB series A-B cable
1 4-pin XLR intercom loop-through adaptor cable
1 Power Cord
RF 433Mhz
Audio on 600Ω 1Vp-p Variable
RF Signal type: FSK modulation
RF Receiver Connectors:
BNC for aerial
Female XLR
Main Unit Connectors:
Male 3-pin XLR for RF receiver connection
Female 3-pin XLRs for each of the wired remotes
Audio intercom loop-through using 1 male and 1 female 4-pin XLRs
1/4” jack socket for balanced audio output
PS/2 style keyboard connector for keyboard programming
B-type USB connector
IEC mains power input
Power:
International Power Supply 100-240VAC 1.0A max
47-63Hz IEC connector
Accessories Included:
2 Wireless remotes
1 RF receiver
1 Aerial
2 Hard-wired remotes
1 USB series A-B cable
1 4-pin XLR intercom loop-through adaptor cable
1 Power Cord