DVW-970P
Sony
DVW-970P
The ability to select between 50i (interlaced) and 25P (progressive) recording provides additional creativity to the production team, allowing the optimum picture "look" to be selected for each production.
Product Weight: 11.88 lbs with viewfinder, microphone, BP-GL95 battery, BCT-D40 tape
Dimensions: 20.43"L x 9.41"W x 10.59"H
Technical Tools
Manufacturer Specs
Genlock video input: BNC type (1), 1.0 Vp-p, 75 Ω
Audio input (CH-1/2): XLR-3-31 type (2), -60/-50/-40/+4 dBu* selectable, high impedance, balanced
Microphone input: XLR-3-31 type (1), -60/-50/-40 dBu*
Time code input: BNC type (1), 0.5 to 18 Vp-p, 10 kΩ
Analogue composite output: BNC type (1), 1.0 Vp-p, 75 Ω
SDI output: BNC type (1), 0.8 Vp-p, 75 Ω (an optional CBK-SD01 is required)
Video test output: BNC type (1), 1.0 Vp-p, 75 Ω
Audio output (CH-1/2): XLR-5-pin, male (stereo)
Time code output: BNC type (1), 1.0 Vp-p, 75 Ω
Earphone output: Mini-jack (2)
OTHER INPUTS/OUTPUTS
Lens: 12-pin
VF: 20-pin
Remote: 8-pin
Wireless microphone: D-Sub 15-pin
Light: 2-pin, DC 12 V, max. 50 W
DC input: XLR-4-pin, male, DC 11 to 17 V
DC output: 4-pin (for wireless microphone receiver)
DC: 12 V (max. 0.1 A)
Battery terminal: 5-pin
Camcorder adaptor: 40-pin
VTR SECTION
Recording format
Video Digital Betacam
Audio: 4 ch/20 bits/48 kHz
Tape speed: 96.7 mm/s
Record/Playback time: Max. 40 min. with BCT-D40 cassette
Fast forward time: Approx. 6 min. with BCT-D40 cassette
Rewind time: Approx. 5 min. with BCT-D40 cassette
Recommended Recording Media: Sony Digital Betacam S cassette, BCT-D6/D12/D22/D32/D40 Series
Sampling frequency
Y: 13.5 MHz
R-Y/B-Y: 6.75 MHz
Quantization: 10-bit / sample
DIGITAL VIDEO PERFORMANCE
K-factor (2T pulse): Less than 1 %
Y/C delay: Less than 15 ns
DIGITAL AUDIO PERFORMANCE
Frequency response: 20 Hz to 20 kHz, +0.5 dB/-0.8 dB
Dynamic range: More than 85 dB (emphasis ON)
Distortion (at 1 kHz, emphasis Less than 0.08 % ON, reference level)
Cross talk: Less than –70 dB (at 1 kHz, reference level)
Wow & flutter: Below measurable limit
Head room: 20 dB (ex-factory setting)
CAMERA SECTION
Pickup device: 3-chip 2/3-inch type Power HAD EX CCD
Aspect ratio: 16:9/4:3 switchable
Total picture elements: 1038 x 1188 (H x V)
Effective picture elements: 980 x 1164 (H x V)
OPTICAL SYSTEM
Spectral system: F1.4 prism (with quarts filter)
Built-in filters
1: Clear
2: 1/4ND
3: 1/16ND
4: 1/64ND
A: CROSS
B: 3200K
C: 4300K
D: 6300K
Lens mount: 2/3-inch type Sony bayonet mount
ELECTRICAL CHARACTERISTICS
Scan format: 625/50i, 625/25p
A/D conversion: 14 bits
Sensitivity: F11 (typical) (2000 lx, 89.9% reflectance)
Minimum illumination: 0.008 lx (F1.4 lens, +48 dB gain, with slow shutter mode at 16-frame accumulation)
Smear level: -145 dB (typical)
Video S/N ratio: 63 dB (typical)
Vertical resolution
480 TV lines (with EVS) and
530 TV lines (without EVS) at 625/50i mode
575 TV lines at 625/25p mode
Shutter speed
1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 s at 625/50i mode
1/33, 1/50, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 s at 625/25p mode
ECS 50 to 6000 Hz at 625/50i mode
25 to 6000 Hz at 625/25p mode
Slow shutter: 1/25, 1/12.5, 1/8.3, 1/6.3, 1/5, 1/4.2, 1/3.6, 1/3.1, 1/1.6 s (1 to 8, 16 frames)
Gain selection: -3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42, 48 dB (for GAIN LOW, GAIN MID, GAIN HIGH and GAIN TURBO positions)
Registration: 0.05% (all zones, without lens)
Warm-up time: 2 s
Modulation depth at 5 MHz: 70% (16:9 typical)/55% (4:3 typical)
VIEWFINDER
CRT: 2.0-inch monochrome
Controls: BRIGHT, CONTRAST, PEAKING, TALLY, ZEBRA, DISPLAY switches
Horizontal resolution: 450 TV lines (16:9)/600 TV lines (4:3)
Microphone: Electret condenser microphone (Ultra-directional) (Detachable)
GENERAL
Power requirements: DC 12 V +5.0 V/-1.0 V
Power consumption: 29 W (with DC 12 V power supply, REC mode, with viewfinder)
Operating temperature: +32°F to +104°F
Storage temperature: -4°F to +140°F
Operating humidity: 25 to 85% (relative humidity)
Continuous operating time: Approx. 170 min. with BP-GL95 battery at 77°F, REC mode
