RM-B750
Sony
RM-B750
Sony RM-B750 Camera Remote Control Unit
This remote control unit is used to establish a highly mobile and fully controllable camera system in the field by integrating control capability equivalent to a Master Set-up Unit into a compact unit powered from the device to be controlled.
The RM-B750 can be connected directly to the any HDC-900 series camera, attached to the half-rack HDCU-950 Camera Control Unit or connected to an HDW-250 portable VTR used with these components. The combination of an LCD touch-panel screen and direct push buttons enables full parameter adjustment of the camera to be controlled.
When necessary, basic tape transport functions of a portable VTR can be controlled. For further operational convenience, the RM-B750 has a Memory Stick media card slot so that various setup parameters can be stored and transferred between camcorders.
The RM-B750 can be connected directly to the any HDC-900 series camera, attached to the half-rack HDCU-950 Camera Control Unit or connected to an HDW-250 portable VTR used with these components. The combination of an LCD touch-panel screen and direct push buttons enables full parameter adjustment of the camera to be controlled.
When necessary, basic tape transport functions of a portable VTR can be controlled. For further operational convenience, the RM-B750 has a Memory Stick media card slot so that various setup parameters can be stored and transferred between camcorders.
Product Weight: 1.54 lbs
Dimensions: 7.76"W x 2.44"H x 4.88"D
Manufacturer Specs
General
Power Requirements: DC 10.5 - 30 V maxiumum (supplied from camera/camcorder/CCU)
Operating Temperature: +41˚F to +104˚FC
Storage Temperature: -4˚F to +141˚F
Inputs
Control interface: 8-pin (x 1), Sony Camera Command Network Protocol
Monitor in: BNC type (x 1) VBS (No HD signal capable)
Power Requirements: DC 10.5 - 30 V maxiumum (supplied from camera/camcorder/CCU)
Operating Temperature: +41˚F to +104˚FC
Storage Temperature: -4˚F to +141˚F
Inputs
Control interface: 8-pin (x 1), Sony Camera Command Network Protocol
Monitor in: BNC type (x 1) VBS (No HD signal capable)