VCC-4794
Sanyo
VCC-4794
Sanyo VCC-4794 Day/Night Color Security Camera
This two-in-one solution is a color camera during the day, a high-sensitivity B/W camera during the night. The color camera, which captures objects in vivid colors in daylight, becomes a high-sensitivity B/W camera during the night and provides tiny details even in dark corners.
Product Weight: 0.88 lb without lens
Dimensions: 2.64"W x 2.13"H x 6.04"D
Technical Tools
PDF Documents
Manufacturer Specs
Scanning system: NTSC standard 525 lines, 60 fields/sec.
Image sensor: 1/3” (approx. 4.8 mm x 3.6 mm) interline transfer method CCD
Number of pixels: Total: 811 (H) x 508 (V), Effective: 768 (H) x 494 (V)
Horizontal resolution: More than 520 TV lines
Minimum illumination (approx.)
50IRE: 0.01 lx (F1.2, Gain High, B/W mode) / 0.45 lx (F1.2, Gain High, color mode)
20IRE: 0.004 lx (F1.2, Gain High, B/W mode) / 0.18 lx (F1.2, Gain High, color mode)
Video output: 1.0 V (p-p)/75 ohms, composite
Video S/N ratio: More than 50 dB (AGC off)
Backlight compensation
ON / OFF — Slide SW (side)
ON = Multi-spot metering (64-section) / Center-zone metering — (activated when auto iris lens used)
White balance: ATW / Manual — Slide SW (side)
Gain control: Normal / High — Slide SW (side)
Gamma: y = 0.45
Light control: Optical auto iris lens / Electronic iris (indoor use)
Lens mount: CS mount (C mount: using C-mount adaptor supplied)
Flange back: 12.5 mm ±0.5 mm adjustment
Auto iris lens: DC only
Auto iris output: DC: Drive coil (+, –), Brake (Damp) coil (+, –)
Lens iris level: LEVEL: L to H — VR (side)
Electronic iris range
0.6 lx to 30,000 lx (F1.2 lens: color mode),
0.9 lx to 45,000 lx (F1.4 lens: color mode)
Aperture compensation: Sharp / Normal
Synchronizing system: Internal sync / Line-lock
Day/Night mode: Auto (High/Low), Manual (at control terminal)
Terminals
Video signal: VIDEO OUT — BNC
Auto iris lens: LENS — 4-pin (side)
Power supply
24V AC, GND — 3-pin terminal (rear)
12V DC, NC — 3-pin terminal (rear)
Control: B, C, G — 3-pin terminal (rear)
Environmental Conditions
Temperature
Operating: 14°F to 122°F
Storage: –4°F to +158°F
Humidity
Operating: within 90% RH
Storage: within 70% RH
Power supply: 12 to 15V DC / 24V AC ±10%, 60Hz
Power consumption (approx.): 3.7 W
Camera mount: 1/4” – 20 UNC (top / bottom selectable)
Image sensor: 1/3” (approx. 4.8 mm x 3.6 mm) interline transfer method CCD
Number of pixels: Total: 811 (H) x 508 (V), Effective: 768 (H) x 494 (V)
Horizontal resolution: More than 520 TV lines
Minimum illumination (approx.)
50IRE: 0.01 lx (F1.2, Gain High, B/W mode) / 0.45 lx (F1.2, Gain High, color mode)
20IRE: 0.004 lx (F1.2, Gain High, B/W mode) / 0.18 lx (F1.2, Gain High, color mode)
Video output: 1.0 V (p-p)/75 ohms, composite
Video S/N ratio: More than 50 dB (AGC off)
Backlight compensation
ON / OFF — Slide SW (side)
ON = Multi-spot metering (64-section) / Center-zone metering — (activated when auto iris lens used)
White balance: ATW / Manual — Slide SW (side)
Gain control: Normal / High — Slide SW (side)
Gamma: y = 0.45
Light control: Optical auto iris lens / Electronic iris (indoor use)
Lens mount: CS mount (C mount: using C-mount adaptor supplied)
Flange back: 12.5 mm ±0.5 mm adjustment
Auto iris lens: DC only
Auto iris output: DC: Drive coil (+, –), Brake (Damp) coil (+, –)
Lens iris level: LEVEL: L to H — VR (side)
Electronic iris range
0.6 lx to 30,000 lx (F1.2 lens: color mode),
0.9 lx to 45,000 lx (F1.4 lens: color mode)
Aperture compensation: Sharp / Normal
Synchronizing system: Internal sync / Line-lock
Day/Night mode: Auto (High/Low), Manual (at control terminal)
Terminals
Video signal: VIDEO OUT — BNC
Auto iris lens: LENS — 4-pin (side)
Power supply
24V AC, GND — 3-pin terminal (rear)
12V DC, NC — 3-pin terminal (rear)
Control: B, C, G — 3-pin terminal (rear)
Environmental Conditions
Temperature
Operating: 14°F to 122°F
Storage: –4°F to +158°F
Humidity
Operating: within 90% RH
Storage: within 70% RH
Power supply: 12 to 15V DC / 24V AC ±10%, 60Hz
Power consumption (approx.): 3.7 W
Camera mount: 1/4” – 20 UNC (top / bottom selectable)