HDC-950
Sony
HDC-950
Operational controls and connectors are located in similar positions to those on current Sony HDC and BVP Series cameras, so operators accustomed to these models immediately find the HDC-950 familiar and easy to use.
Existing Sony MSUs, CNUs and RCPs can be used with this camera, and current menu control systems and auto set-up functions are also compatible.
Product Weight: 11.69 lbs without viewfinder and lens
Dimensions: 5.24"W x 10.87"H x 14.17"D
Technical Tools
Manufacturer Specs
Picture elements: 2.2 million pixels
Spectrum system: F1.4 prism system
Color correction filter-A: Cross
Color correction filter-B: 3200 K
Color correction filter-C: 4300 K
Color correction filter-D: 6300 K
Color correction filter-E: 8000 K
Neutral density filter-1: Clear
Neutral density filter-2: 1/4 ND
Neutral density filter-3: 1/8 ND
Neutral density filter-4: 1/16 ND
Neutral density filter-5: 1/64 ND
Servo filter control: Yes
Sensitivity: f 10 at 2000 lux (3200 K, 89.9 % reflectance)
Minimum illumination: 10 lux (F 1.4, +12 dB gain up)
Singal to noise ratio: 54 dB (typical)
Horizontal resolution: 1000 TV lines
Dynamic range (1080/60i mode): 600%
Registration: Within 0.02 % (all zones, without lens)
Shutter speed selection (1080/60i): 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 (s)
Gain selection: -3, 0, +3, +6, +12 dB
Clear Scan selection: 60.1 to 4300 Hz
Extented Clear Scan: 30.3 to 58.3 Hz
Modulation depth: 45 % or more horizontally (800 TV lines at center, 27.5 MHz, with typical lens)
Smear level: -135 dB -125 dB
Frequency response
Within ±0.5 dB, 10 to 25 MHz
Within ±1.0 dB, 25 to 30 MHz
Lens mount: Sony bayonet mount
Operating temperature: -4°F to +113°F
Storage temperature: -4°F to +122°F
Input connector:
Front Mic in: XLR-3-31 type (Female x1) A
Audio in: XLR-3-31 type (Female x 2)
phantom +48 V, 600 Ω, balanced
Return control: 6-pin
DC in: XLR 4-pin type (Male x 1 )
Output connector:
Test out: BNC type, 1.0 Vp-p, 75 Ω
HD SDI out: BNC type for RET
DC out: 4-pin, 10.5 to 17 V, Max. 200 mA
Earphone: Minijack, 8 Ω
DC out: 4-pin, 5 W/ 12 V DC
AC utility out: Max 200 VA
Input/output connectors:
CCU: Optical fiber connector
Lens: 12-pin
Viewfinder connector: 20-pin
Remote: 8-pin (for RCP-700 Series)
External I/O: 20-pin (for CA-905L)
Memory Stick slot (x 1)
VTR out: CCZ-type, 26-pin, (Female x 2)
Genlock/Return in/Prompter out(Selectable): BNC type
