HDCU-900
Sony
HDCU-900
Sony HDCU-900 HD Camera Control Unit
This full size camera control unit is designed to work with Sony's HDC-950, providing maximum expandability, flexibility, and full controllability in fixed environments.
As standard, it has four sets of HD SDI SMPTE 292M signal outputs and V/F return inputs, plus four sets of digitally down-converted SDI SMPTE 259M outputs and four digitally up-converted V/F return inputs.
As standard, it has four sets of HD SDI SMPTE 292M signal outputs and V/F return inputs, plus four sets of digitally down-converted SDI SMPTE 259M outputs and four digitally up-converted V/F return inputs.
Technical Tools
PDF Documents
Manufacturer Specs
Camera
Optical fiber cable interface: SMPTE 304M based optical fiber connector (x 1), 1.5 Gb/s optical fiber digital transmission, SMPTE 292M, AC 240 V
HD input/outputs
HD SDI output: BNC type (x 3), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P
HD monitor output: BNC type (x 1), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P
HD SDI return input: BNC type (x 4), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P
SD outputs
SD SDI output: BNC type (x 4), SMPTE 259M, Serial digital component, 480/576-lines
SD analog monitor output: BNC type, WF (x 1), PIX (x 1), Analog R/G/B, 480/576-lines
Sync
Reference input: BNC type (x 1, with loop-through), HD tri-level sync or SD Black Burst
Sync output: BNC type (x 1), HD tri-level sync or SD Sync
Intercom/Tally/PGM
Intercom PD & ENG: D-sub 25-pin (x 1), 4W/RTS/CC selectable
PGM1/PGM2: 0/-20 dBu selectable
R-Tally/G-Tally: 24 V power in/make contact
Audio
MIC1/MIC2 output: XLR-3-31 type (Female x 2), 0/-20 dBu selectable
Digital audio output: BNC type (x 1), AES/EBU format, 20-bit/48 kHz
Prompter
Prompter in: BNC type (x 1, with loop-through), Analog, NTSC/PAL/HD-Y
Others
RCP/MSU/CNU interface: 8-pin (x 1), Sony Camera Command Network
Protocol (for entire camera system control)
WF mode: 4-pin, Stair step (for SD composite Waveform monitor)
WF control: D-sub 15-pin (x 1), GPI (for SDI component WF control)
System expansion I/O: D-sub 15-pin (x 2), GPI (for system control with external GPI interface)
Trunk line: D-sub 9-pin, RS-232C, (remote line for CHU equipment)
Power supply: AC 100/110-120/220/240 V, 50 Hz/60 Hz
Current consumption: 5 A (at 100 V AC, entire system active)
Operating temperature: +41°F to +104°F
Storage temperature: -4°F to +140°F
Optical fiber cable interface: SMPTE 304M based optical fiber connector (x 1), 1.5 Gb/s optical fiber digital transmission, SMPTE 292M, AC 240 V
HD input/outputs
HD SDI output: BNC type (x 3), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P
HD monitor output: BNC type (x 1), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P
HD SDI return input: BNC type (x 4), SMPTE 292M, 1080/50i, 60i, 30P, 25P, 24P
SD outputs
SD SDI output: BNC type (x 4), SMPTE 259M, Serial digital component, 480/576-lines
SD analog monitor output: BNC type, WF (x 1), PIX (x 1), Analog R/G/B, 480/576-lines
Sync
Reference input: BNC type (x 1, with loop-through), HD tri-level sync or SD Black Burst
Sync output: BNC type (x 1), HD tri-level sync or SD Sync
Intercom/Tally/PGM
Intercom PD & ENG: D-sub 25-pin (x 1), 4W/RTS/CC selectable
PGM1/PGM2: 0/-20 dBu selectable
R-Tally/G-Tally: 24 V power in/make contact
Audio
MIC1/MIC2 output: XLR-3-31 type (Female x 2), 0/-20 dBu selectable
Digital audio output: BNC type (x 1), AES/EBU format, 20-bit/48 kHz
Prompter
Prompter in: BNC type (x 1, with loop-through), Analog, NTSC/PAL/HD-Y
Others
RCP/MSU/CNU interface: 8-pin (x 1), Sony Camera Command Network
Protocol (for entire camera system control)
WF mode: 4-pin, Stair step (for SD composite Waveform monitor)
WF control: D-sub 15-pin (x 1), GPI (for SDI component WF control)
System expansion I/O: D-sub 15-pin (x 2), GPI (for system control with external GPI interface)
Trunk line: D-sub 9-pin, RS-232C, (remote line for CHU equipment)
Power supply: AC 100/110-120/220/240 V, 50 Hz/60 Hz
Current consumption: 5 A (at 100 V AC, entire system active)
Operating temperature: +41°F to +104°F
Storage temperature: -4°F to +140°F