Skip to content

VER - Video Equipment Rentals
Search
Customer Service

800-794-1407

24/7 Technical Support

888-584-TECH

Products

DT-V24L1D

Enlarge Image

Additional Images:

JVC

DT-V24L1D

JVC DT-V24L1D 24" Studio HD Monitor

Designed for critical image evaluation, this monitor features true native pixel-to-pixel 1080p image display. Built-in digital HD-SDI and DVI-D interfaces provide lossless connection to broadcast and studio sources. Superior scaling and de-interlacing, 10-bit 1080p processing combined with traditional rotary image controls, area markers, blue check and timecode display make the DT-V24L1D the ultimate choice reference monitor for a variety of professional applications.

Product Weight:  25.5 lbs including stand
Dimensions:  22.25"W x 17.75"H x 9.58"D including stand

Technical Tools

Manufacturer Specs

Type: Multi-format HDTV/SDTV Studio Monitor
Screen Size: 24"
Aspect Ratio: 16:9
Resolution (Video): 1920 x 1080
LCD Panel: 24" wide, active matrix TFT
Effective Screen Size (W x H): 51.84 x 32.4 cm
Resolution (Video+Data): 1920 x 1200 (WUXGA)
Display Colors: 16.7 millon
Viewing Angle: 176˚ Horizontal and Vertical
Brightness: 400 cd/m2
Contrast Ratio:    1000:1
   
Horizontal/Vertical Frequency (PC signals): Signals out of the range of accepted frequences may not be displayed. In this case, "Out of range" is shown.
Horizontal: 31.469 kHz to 75.000 kHz
Vertical: 60 Hz ± 5 Hz.
   
Applicable Standards   
HD SDI: BTA S-004B, SMPTE292M   
SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525   
EMBEDDED AUDIO: SMPTE299M, SMPTE272M   
   
Audio Output: Internal: 1.0 W + 1.0 W (L/R)
   
Environmental Conditions   
Operating temperature: 41˚F to 95˚F
Operating humidity: 20% to 80% (non condensing)
   
Rated Current: 1.15 A
   
Input/Output Terminals   
Video   
Video 1: Composite video signal input/output: 1 line, BNC x 2, 1 V (p-p), 75 ohms
Video 2: (IN and OUT are connected with a bridge connection (auto termination)
DVI-D (HDCP): DVI-D signal input (compatible with HDCP): DVI connector  x 1 (compatible with DDC2B)
COMPO./RGB: Analog component signal/analog RGB signal input/output: 1 line, BNC x 6 (G/Y, B/Pb/B-Y, R/Pr/R-Y)
Video signal: G/Y: 1 V (p-p), 75 ohms (sync signal included), B/Pb/B-Y, R/Pr/R-Y: 0.7 V (p-p), 75 ohms (IN and OUT are connected with a bridge connection (auto termination)
   
EXT. SYNC (CS):    Composite sync signal input/output: 1 line, BNC x 2, 0.3 V (p-p) to 4 V (p-p), 75 ohms (bipolar tri-signal, negative pole binary signals, BB) (video signals excluded) (IN and OUT are connected with a bridge connection (auto termination)
   
HD/SD SDI (IN 1): Digital signal input (compatible with EMBEDDED AUDIO):
HD/SD SDI (IN 2): Auto detection, 1 line, BNC x 1
HD/SD SDI (SWITCHED OUT): Digital signal output (compatible with EMBEDDED AUDIO): 1 line (switched out), BNC x 1
   
Audio   
AUDIO ASSIGN (IN 1): Analog audio signal input: 1 line, RCA x 2, 500 mV (rms), high impedance
AUDIO ASSIGN (IN 1): Analog audio signal input: 1 line, RCA x 2, 500 mV (rms), high impedance
AUDIO ASSIGN (MONITOR OUT): Analog audio signal output: 1 line, RCA x 2, 500 mV (rms)
   
External Controls   
MAKE/TRIGGER: RJ-45 x 1 (8-pin)
RS-485:    RJ-45 x 2 (IN/OUT) (8-pin)
RS-232C: D-sub (9-pin) x 1

Input formats
Video: PAL, SECAM, NTSC, BW 50/60Hz
Component:/RGB 576/50i, 480/60i, 576/50p, 480/60p, 720/24p, 25p, 30p, 50p, 60p, 1035/60i, 1080/50i, 60i, 1080/24psf, 30psf, 1080/24p, 25p, 30p
SDI/HD-SDI: 576/50i, 480/60i, 720/24p, 25p, 30p, 50p, 60p, 1035/60i, 1080/50i, 60i, 1080/24psf, 30psf, 1080/24p, 25p, 30p
DVI-D with HDCP (Video): 480/60i, 576/50i, 480/60p, 576/50p, 720/50p, 60p, 1035/60i, 1080/50i, 60i, 1080/24p, 25p, 30p, 50p, 60p, 640 x 480@60
DVI-D (PC): VGA60, WVGA60, SVGA60, XGA60, WXGA60 (1280 x 768), SXGA60 (1280 x 1024), 1920 x 1080@60, 1280 x 720@60, WSXGA+60 (1680 x 1050), UXGA60 (1600 x 1200),
WUXGA60 (1920 x 1200)