Roadster X6
Christie
Roadster X6
Christie Roadster X6 Projector
This powerhouse projector produces 6000 ANSI lumens and 1024 by 768 resolution from its small frame with a 1200W Xenon CERMAX® illumination system and 3-chip DLP™ technology. With a digital interface, it can project digital images without signal conversion.
Christie’s proprietary Intelligent Lens System (ILS™), fully motorized, allows for the automatic recall of lens position and source parameters upon changing sources. And its LiteLOC™ feature gives you exclusive, full control of the X6’s programmable power supply. Fitted with password protection, LiteLOC™ permits the projector to be used only with the lamp mode you select.
Offset and keystoning capabilities, combined with the system’s unobtrusive design and compact size, make it the ideal system for stacking, and it can also be easily suspended via integrated fly-points.
Ideal for use in executive briefing and conference centers, concerts, tradeshows and exhibitions, auditoriums and churches, casinos, theme parks and museums.
Christie’s proprietary Intelligent Lens System (ILS™), fully motorized, allows for the automatic recall of lens position and source parameters upon changing sources. And its LiteLOC™ feature gives you exclusive, full control of the X6’s programmable power supply. Fitted with password protection, LiteLOC™ permits the projector to be used only with the lamp mode you select.
Offset and keystoning capabilities, combined with the system’s unobtrusive design and compact size, make it the ideal system for stacking, and it can also be easily suspended via integrated fly-points.
Ideal for use in executive briefing and conference centers, concerts, tradeshows and exhibitions, auditoriums and churches, casinos, theme parks and museums.
Note: Lenses rented separately.
Consult your VER representative for expert advice.
Consult your VER representative for expert advice.
Product Weight: 92 lbs
Dimensions: 30.1"L x 22.28"W x 11.88"H
Technical Tools
PDF Documents
Manufacturer Specs
Brightness
• 6000 ANSI lumens
• 90% brightness uniformity across the screen
Resolution/Digital Processing
• 3-chip 0.9" DMD™‚ (Digital Micromirror Device) system
• True XGA 1024 x 768 chip resolution
• 13-bit user selectable gamma table
• More than 1 billion displayable colors
Contrast Ratio (1.5-2.2:1 zoom lens)
• 350:1 ANSI, 500:1 on/off
Dynamic Scaling
• Resizing capabilities to scale down from 1600 x 1200 and up from 640 x 480 to XGA resolution
• Independent horizontal and vertical size adjustment for graphics and video inputs
Frequency Range
• Horizontal: 15 to 120kHz
• Vertical: 24 to 120Hz
Field Interchangeable Optional Lenses
• Fixed short throw lens XGA 0.8:1
• Short zoom XGA lens 1.5 2.5: 1 becomes 1.2-2:1
• Zoom XGA lens 2.5-4:1 becomes 2-3.2:1
• Zoom XGA lens 4-7:1 becomes 3.2-5.6:1
Screen size: 5 - 40 foot diagonal
Power Lens Mount
• Fully-motorized (with manual override) lens focus, zoom, horizontal and vertical offset
• Unique ILS™ (Intelligent Lens System) – Lens position (zoom, focus, horizontal and vertical offset) is automatically recalled during channel switching
• Lens mount tilt adjustment
• Built-in light shutter
Inputs
• Built-in RGB/YUV/YPbPr inputs allowing separate H and V syncs, tri-level sync, composite sync and syncon-green/luma (5 BNC connectors)
• Multi-standard Video Decoder Module (NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM) with one composite video input (BNC and RCA connectors) and one S-video input (two BNC and 4-pin mini-DIN connectors)
• Slot for an optional input module
• Full compatibility with third-party switchers
HDTV/DTV Compatibility
• Full HDTV/DTV compatibility on analog RGB/YPbPr inputs
• Accepts 480i, 480p, 576i, 576p, 1035i, and 1080i formats at all applicable frame/field rates
• Accepts 1080p at 24, 25 and 30 Hz frame rates
• Optional HDTV Serial Digital Input Module
Various Keypads
• Standard hand-held IR backlit remote keypad, front and rear infrared sensors
• Built-in backlit keypad
• Optional RS422 two-way remote controller with LCD display using 6-pin XLR connector with range of 3000ft
• Optional wired backlit remote keypad with 3-pin XLR connector
Control/Networking
• Third party control system and switcher compatibility
• Dual RS232 ports for computer control, with loop-through for connection of multiple projectors
• Dual 6-pin XLR RS422 ports for connection of optional LCD two-way controllers and loop-through to multiple projectors up to 600'
Diagnostics
• Built-in LCD diagnostic display indicates operational status and error messages
• Power and Status LED
• Full diagnostics through RS232 9-pin D connector
Graphical User Interface
• Auto set-up feature
• "Direct Access" intuitive user interface for complete projector control in 5 world languages
• On-screen user movable menus to fit different image aspect ratios (4:3, 5:4, 16:9, etc.)
• On-screen help menus
• 100 channel memories
• Auto power feature
Lamp Specification/Color Temperature
• 1200W CERMAX® Xenon illumination system
• Pre-aligned lamp module
• Constant color temperature over the lamp life
• Color temperature adjustment range: 32000K to 93000K
• User replacement time: within 5 minutes
Variable Lamp Power Supply/Light Output Control (LiteLOC™)
• "Auto Brightness" mode to maintain constant brightness over time
• "Lamp Conserve" mode to extend the lamp life
• "Max Brightness" mode for maximum light output
Power Requirements
• Line voltage 220 VAC to 240 VAC +/- 10% @ 50/60 Hz
• Power consumption: 1700W maximum
• Thermal dissipation: 5150 BTU/hr
• Operating current: 8.5A maximum
Standard Accessories
• IR remote keypad with batteries
• 8' line cord
Optional Accessories
• Serial Digital Input (SMPTE 259M/CCIR 601) with loop-through feature
• Digital HDTV Input module (with loopthrough feature) compatible with all known HDTV formats
• DVI/DFP Input module
• 10-bit ADP (Advanced Digital Processing) module
• Wired remote keypad
• RS422 two-way remote LCD controller
Regulatory Approvals
• CSA, UL and European safety approvals
• North American and European EMI/EMC approvals
• 6000 ANSI lumens
• 90% brightness uniformity across the screen
Resolution/Digital Processing
• 3-chip 0.9" DMD™‚ (Digital Micromirror Device) system
• True XGA 1024 x 768 chip resolution
• 13-bit user selectable gamma table
• More than 1 billion displayable colors
Contrast Ratio (1.5-2.2:1 zoom lens)
• 350:1 ANSI, 500:1 on/off
Dynamic Scaling
• Resizing capabilities to scale down from 1600 x 1200 and up from 640 x 480 to XGA resolution
• Independent horizontal and vertical size adjustment for graphics and video inputs
Frequency Range
• Horizontal: 15 to 120kHz
• Vertical: 24 to 120Hz
Field Interchangeable Optional Lenses
• Fixed short throw lens XGA 0.8:1
• Short zoom XGA lens 1.5 2.5: 1 becomes 1.2-2:1
• Zoom XGA lens 2.5-4:1 becomes 2-3.2:1
• Zoom XGA lens 4-7:1 becomes 3.2-5.6:1
Screen size: 5 - 40 foot diagonal
Power Lens Mount
• Fully-motorized (with manual override) lens focus, zoom, horizontal and vertical offset
• Unique ILS™ (Intelligent Lens System) – Lens position (zoom, focus, horizontal and vertical offset) is automatically recalled during channel switching
• Lens mount tilt adjustment
• Built-in light shutter
Inputs
• Built-in RGB/YUV/YPbPr inputs allowing separate H and V syncs, tri-level sync, composite sync and syncon-green/luma (5 BNC connectors)
• Multi-standard Video Decoder Module (NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM) with one composite video input (BNC and RCA connectors) and one S-video input (two BNC and 4-pin mini-DIN connectors)
• Slot for an optional input module
• Full compatibility with third-party switchers
HDTV/DTV Compatibility
• Full HDTV/DTV compatibility on analog RGB/YPbPr inputs
• Accepts 480i, 480p, 576i, 576p, 1035i, and 1080i formats at all applicable frame/field rates
• Accepts 1080p at 24, 25 and 30 Hz frame rates
• Optional HDTV Serial Digital Input Module
Various Keypads
• Standard hand-held IR backlit remote keypad, front and rear infrared sensors
• Built-in backlit keypad
• Optional RS422 two-way remote controller with LCD display using 6-pin XLR connector with range of 3000ft
• Optional wired backlit remote keypad with 3-pin XLR connector
Control/Networking
• Third party control system and switcher compatibility
• Dual RS232 ports for computer control, with loop-through for connection of multiple projectors
• Dual 6-pin XLR RS422 ports for connection of optional LCD two-way controllers and loop-through to multiple projectors up to 600'
Diagnostics
• Built-in LCD diagnostic display indicates operational status and error messages
• Power and Status LED
• Full diagnostics through RS232 9-pin D connector
Graphical User Interface
• Auto set-up feature
• "Direct Access" intuitive user interface for complete projector control in 5 world languages
• On-screen user movable menus to fit different image aspect ratios (4:3, 5:4, 16:9, etc.)
• On-screen help menus
• 100 channel memories
• Auto power feature
Lamp Specification/Color Temperature
• 1200W CERMAX® Xenon illumination system
• Pre-aligned lamp module
• Constant color temperature over the lamp life
• Color temperature adjustment range: 32000K to 93000K
• User replacement time: within 5 minutes
Variable Lamp Power Supply/Light Output Control (LiteLOC™)
• "Auto Brightness" mode to maintain constant brightness over time
• "Lamp Conserve" mode to extend the lamp life
• "Max Brightness" mode for maximum light output
Power Requirements
• Line voltage 220 VAC to 240 VAC +/- 10% @ 50/60 Hz
• Power consumption: 1700W maximum
• Thermal dissipation: 5150 BTU/hr
• Operating current: 8.5A maximum
Standard Accessories
• IR remote keypad with batteries
• 8' line cord
Optional Accessories
• Serial Digital Input (SMPTE 259M/CCIR 601) with loop-through feature
• Digital HDTV Input module (with loopthrough feature) compatible with all known HDTV formats
• DVI/DFP Input module
• 10-bit ADP (Advanced Digital Processing) module
• Wired remote keypad
• RS422 two-way remote LCD controller
Regulatory Approvals
• CSA, UL and European safety approvals
• North American and European EMI/EMC approvals