SK5212
Sennheiser
SK5212
Sennheiser SK5212 Transmitter
This is a small but robust professional transmitter. With a 50 milliwatt output signal, it is ideal for coordinating a large number of wireless frequencies.
Product Weight: .27 lbs
Dimensions: 2.36"W x 2.09"H x 0.67"D
Technical Tools
PDF Documents
- Product Manual - Sennheiser - SK5212 (796 KB)
Manufacturer Specs
Modulation: wideband FM
Frequency range: 450 - 9 60 MHz
Switching bandwidth: 36 MHz
Transmission frequencies, tunable in steps of 5 kHz: channel bank “FIX” with customer-specific frequencies; channel bank “VAR” with 20 freely selectable frequencies
RF output power, switchable, typical: 50 mW (PWR.HI), 10 mW (PWR.LO)
Frequency stability: ±10 ppm
Spurious emission: < 4 nW
Nominal/peak deviation: ±40 kHz/ ±56 kHz
Signal-to-noise ratio: 110 dB(A)r ms
THD: < 0.3 % at nominal deviation , 1 kHz
AF frequency response: 60-2 0,00 0 Hz
Noise reduction system: Sennheiser HiDyn plus™
Input sensitivity at nominal deviation, 1 kHz: -40 dBu=7.75 mV, adjustable in steps of 1 dB , range: 70 dB
Low-cut frequency (-3 dB ): adjustable (flat, 12 0 Hz)
Power supply: 1 AA size battery (1.5 V)
Power consumption (without LC display illumination): approx. 1 60 mA at 1.2 V (PWR.LO); approx. 250 mA at 1.2 V (PWR.HI)
Operating time: approx. 11 hrs (PWR .LO), approx. 5.5 hrs (PWR.HI)
Temperature range: 14°F to 113°F
Connections: AF: 3-pin special microphone socket; RF: coax socket
Certifications
USA: FCC-Part 74.86 1, FCC ID: DMOSK52 12
Canada: RSS-12 3, IC: 20 99 A-SK5 21 2
EU: requirements of R&TTE: EN 5 03 92, ETSI EN 3 00 42 2-1/ -2, class II, ETSI EN 3 01 48 9-1/ -9, CE 0 68 2
Frequency range: 450 - 9 60 MHz
Switching bandwidth: 36 MHz
Transmission frequencies, tunable in steps of 5 kHz: channel bank “FIX” with customer-specific frequencies; channel bank “VAR” with 20 freely selectable frequencies
RF output power, switchable, typical: 50 mW (PWR.HI), 10 mW (PWR.LO)
Frequency stability: ±10 ppm
Spurious emission: < 4 nW
Nominal/peak deviation: ±40 kHz/ ±56 kHz
Signal-to-noise ratio: 110 dB(A)r ms
THD: < 0.3 % at nominal deviation , 1 kHz
AF frequency response: 60-2 0,00 0 Hz
Noise reduction system: Sennheiser HiDyn plus™
Input sensitivity at nominal deviation, 1 kHz: -40 dBu=7.75 mV, adjustable in steps of 1 dB , range: 70 dB
Low-cut frequency (-3 dB ): adjustable (flat, 12 0 Hz)
Power supply: 1 AA size battery (1.5 V)
Power consumption (without LC display illumination): approx. 1 60 mA at 1.2 V (PWR.LO); approx. 250 mA at 1.2 V (PWR.HI)
Operating time: approx. 11 hrs (PWR .LO), approx. 5.5 hrs (PWR.HI)
Temperature range: 14°F to 113°F
Connections: AF: 3-pin special microphone socket; RF: coax socket
Certifications
USA: FCC-Part 74.86 1, FCC ID: DMOSK52 12
Canada: RSS-12 3, IC: 20 99 A-SK5 21 2
EU: requirements of R&TTE: EN 5 03 92, ETSI EN 3 00 42 2-1/ -2, class II, ETSI EN 3 01 48 9-1/ -9, CE 0 68 2