SK-HD1000
Hitachi
SK-HD1000
The camera provides a choice of 720p or 1080i and is both NTSC and PAL compatible.
It is used with Hitachi's CU-HD1000 camera control unit, which contributes to the new and highly-integrated design of the camera; this helps to reduce the power consumption of the camera system to less than 150VA. High reliability and easy maintenance have been realized by integrating the HD and SD signal handling and power supply electronics into three plug-in modules inside the CU-HD1000.
HD-SDI signal outputs of 1080i or 720P are available as standard depending on the initial selection of CCDs. Down-converted Standard Definition outputs are provided in the optional “up/down converter” module, which allows selection of inputs and outputs in all-analog, all-digital (SDI), or a mix of the two.
CCU Weight: 15.40 lbs
CCU Dimensions: 8.50"W x 4.65"H x 15.75"D
(1/2 RU wide, 3 RU high)
Camera Weight: 10.12 lbs (head with adapter and 2" viewfinder)
Camera Dimensions: 5.04"W x 7.36"H x 13.31"D
Technical Tools
Manufacturer Specs
Effective pixels: 1,920 (H) x 1,080 (V)
Optical system: F1.4 prism
Optical Filters
Motorized filter wheel with 4 filter positions: Clear, Cross, 1/16ND, 1/64ND
ECC (Electric Color Corrector) with 5 settings: 3200K, 4300K, 5600K, 6300K, 8000K
Sensitivity: F10 @ 2000 lx, 3200K, 89.9% reflectance
Signal to Noise Ratio: 60dB (HD-SDI, Y:27.5 MHz)
Horizontal resolution: 1100 TV Lines
Registration: 0.05% (excluding lens characteristics)
Gain selection
L (low) -3, 0, +3, +6, +9, +12, +15, +18dB
M (medium) 0, +3, +6, +9, +12, +15, +18, +21dB
H (high) +3, +6, +9, +12, +15, +18, +21, +24dB
Power consumption: 16W (head only, without VF)
Operating temperature: 14° to 113°F
Connections
Camera head: 1x BNC HD-SDI VF out (Character ON/OFF) or HD-SDI RET out (when studio configured)
Input & Output
4-pin Multi connector for remote control panel
20-pin Multi VF connector
12-pin Multi LENS connector
3-pin XLR MIC-1 connector
SD MemoryCard Slot
