Spyder X20 1608 System A
Vista Systems
Spyder X20 1608 System A
Vista Spyder X20 1608 16-Input, 8-Output Hardware-Based Video Processing System in a 22-Space Rack
With its full-complement workbox, this system is designed to arrive on show site fully ready and capable of integrating into any video system. Every component is arranged neatly and logically to give the end user everything he needs.
The main X20 case has an onboard Dell PC with the latest version of Vista Advanced 2009, used to configure and design screen looks on the Spyder system. A rack-mounted KVM switch – with pull-out LCD, keyboard & mouse – is pre-wired into the Spyder's SBC (Single Board Computer) so that a technician in the field can view the current state of the Spyder system by reading the status of the Spyder Server Application, an intuitive way to troubleshoot any potential bugs.
VER’s Spyder systems are designed to complement small, medium or large shows. The X20's 16 inputs and 8 outputs are broken out as follows: 8 inputs of either component, composite, 3G/HD-SDSDI, or S-Video; 8 inputs of DVI-I, which can be used as either digital or analog “high resolution” up to 2560x1600; 8 outputs of DVI-I or 3G/HD-SDSDI, one of which is designated for the LOCAL OPERATOR MONITOR.
More inputs can be achieved by using third-party routers, such as DVI, HDSDI or RGBHV types.
If the requirements of your client’s event exceed what a single Spyder X20 1608 can offer, it can expand into a “parallel frame grouping” by using two of them; both systems would communicate with one or more third party routers to split the video/computer sources to both X20 units. This expansion would allow the client 32 inputs and 16 outputs. This feature requires an expert level user and should not be attempted by a beginner level operator.
The main X20 case has an onboard Dell PC with the latest version of Vista Advanced 2009, used to configure and design screen looks on the Spyder system. A rack-mounted KVM switch – with pull-out LCD, keyboard & mouse – is pre-wired into the Spyder's SBC (Single Board Computer) so that a technician in the field can view the current state of the Spyder system by reading the status of the Spyder Server Application, an intuitive way to troubleshoot any potential bugs.
VER’s Spyder systems are designed to complement small, medium or large shows. The X20's 16 inputs and 8 outputs are broken out as follows: 8 inputs of either component, composite, 3G/HD-SDSDI, or S-Video; 8 inputs of DVI-I, which can be used as either digital or analog “high resolution” up to 2560x1600; 8 outputs of DVI-I or 3G/HD-SDSDI, one of which is designated for the LOCAL OPERATOR MONITOR.
More inputs can be achieved by using third-party routers, such as DVI, HDSDI or RGBHV types.
If the requirements of your client’s event exceed what a single Spyder X20 1608 can offer, it can expand into a “parallel frame grouping” by using two of them; both systems would communicate with one or more third party routers to split the video/computer sources to both X20 units. This expansion would allow the client 32 inputs and 16 outputs. This feature requires an expert level user and should not be attempted by a beginner level operator.
Note: A QUALIFIED SPYDER OPERATOR IS REQUIRED. Contact your local VER Representative for more information and to determine the right Spyder system for your application.
Product Weight: 59 lbs
Dimensions: 17.3"W x 21.9"D x 7.0"H
Technical Tools
PDF Documents
Manufacturer Specs
VER System A includes:
Main X20 Case Components
1–Spyder X20 Video Processor (16 inputs, 8 outputs)
1–X20PC (Dell server)
1–Rackmount 17” LCD with KVM / Keyboard / Mouse
1–DNF Shotbox controller
1–6’ Serial (9-pin to 25-pin)
1–Lantronix UDS100
2–Rackmount Surge Protector
1–Rackmount Netgear Switch
16–6” DVI-I to DVI and RGBHV female
Accessory Case Components
10–1x2 Lightware DVI Splitters / EDID Managment
20–3’ DVI Dual Link
10–6’ DVI Dual Link
10–15’ DVI Dual Link
4–25’ DVI Dual Link
10–3’ VGA
5–10’ VGA
5–15’ VGA
2–50’ VGA
10–12’ HDSDI
5–10’ Cat5
5–20’ Cat5
4–Power strips
Other System A Components
1–MCII50 Spyder Console
3–24” LCD Monitors
Spyder X20 1608 Specifications
Inputs
Analog (BNC Connectors)
RGB / RGBS component video formats: 480i, 480p, 720p, 1080i
Composite video
S-Video
Analog (DVI-I Connectors)
Analog resolutions up to 2048x1200 (165Mhz maximum pixel clock)
SDI / HD-SDI / 3G SDI
SDI video formats supported: 480i, 480p, 720p, 1080i, 1080p
DVI
Single link resolutions up to 2048x1200
Dual link resolutions up to 2560x1600 (uses two input channels)
Outputs
Supported Signals
Analog RGB and Component
Single-Link DVI
Dual-Link DVI (uses two output channels)
SDI / HD-SDI / 3D-SDI (SMPTE 424M)
Resolutions
Up to 2560x1600 (resolutions greater than 2048x1200 use two output processing channels)
Pixel Clock
Analog up to 165Mhz
Dual-Link DVI up to 265Mhz
Enhanced feature sets
Independent aspect ratio and frame rate set-up
Overlays
Transitions
Aspect ratio conversions
Integrated source monitoring
Built-in image capture
Output rotation (portrait)
Optional stereoscopic support
Hardware features
3rd Party Control Support
RS-232 Serial
Ethernet (UDP)
Power
Redundancy: Two independant, hot-swappable power supplies standard
Operating voltage: 100 VAC to 240 VAC @ 50/60Hz
Operating current: 9.0A @ 100 VAC
Consumption: 900W
Heat dissipation: 3075 BTU/hr max
Physical
Dimensions (LxWxH): 21.9 x 17.3 x 7.0" (556 x 439 x 178mm)
Weight: 59 lbs (27kg)
Operating environment
Temperature: 5-40° C (40-105° F)
Humidity: 20-80% non-condensing
Regulatory approvals
UL / CSA / IEC 60950 (3rd Edition)
FCC Class A, CE, CCC
RoHS, WEEE
Main X20 Case Components
1–Spyder X20 Video Processor (16 inputs, 8 outputs)
1–X20PC (Dell server)
1–Rackmount 17” LCD with KVM / Keyboard / Mouse
1–DNF Shotbox controller
1–6’ Serial (9-pin to 25-pin)
1–Lantronix UDS100
2–Rackmount Surge Protector
1–Rackmount Netgear Switch
16–6” DVI-I to DVI and RGBHV female
Accessory Case Components
10–1x2 Lightware DVI Splitters / EDID Managment
20–3’ DVI Dual Link
10–6’ DVI Dual Link
10–15’ DVI Dual Link
4–25’ DVI Dual Link
10–3’ VGA
5–10’ VGA
5–15’ VGA
2–50’ VGA
10–12’ HDSDI
5–10’ Cat5
5–20’ Cat5
4–Power strips
Other System A Components
1–MCII50 Spyder Console
3–24” LCD Monitors
Spyder X20 1608 Specifications
Inputs
Analog (BNC Connectors)
RGB / RGBS component video formats: 480i, 480p, 720p, 1080i
Composite video
S-Video
Analog (DVI-I Connectors)
Analog resolutions up to 2048x1200 (165Mhz maximum pixel clock)
SDI / HD-SDI / 3G SDI
SDI video formats supported: 480i, 480p, 720p, 1080i, 1080p
DVI
Single link resolutions up to 2048x1200
Dual link resolutions up to 2560x1600 (uses two input channels)
Outputs
Supported Signals
Analog RGB and Component
Single-Link DVI
Dual-Link DVI (uses two output channels)
SDI / HD-SDI / 3D-SDI (SMPTE 424M)
Resolutions
Up to 2560x1600 (resolutions greater than 2048x1200 use two output processing channels)
Pixel Clock
Analog up to 165Mhz
Dual-Link DVI up to 265Mhz
Enhanced feature sets
Independent aspect ratio and frame rate set-up
Overlays
Transitions
Aspect ratio conversions
Integrated source monitoring
Built-in image capture
Output rotation (portrait)
Optional stereoscopic support
Hardware features
3rd Party Control Support
RS-232 Serial
Ethernet (UDP)
Power
Redundancy: Two independant, hot-swappable power supplies standard
Operating voltage: 100 VAC to 240 VAC @ 50/60Hz
Operating current: 9.0A @ 100 VAC
Consumption: 900W
Heat dissipation: 3075 BTU/hr max
Physical
Dimensions (LxWxH): 21.9 x 17.3 x 7.0" (556 x 439 x 178mm)
Weight: 59 lbs (27kg)
Operating environment
Temperature: 5-40° C (40-105° F)
Humidity: 20-80% non-condensing
Regulatory approvals
UL / CSA / IEC 60950 (3rd Edition)
FCC Class A, CE, CCC
RoHS, WEEE