PS2001
Barco (Folsom)
PS2001
Barco (Folsom) PS2001 PresentationPro Audio and Video Seamless Switcher
Product Weight: 9 lbs
Dimensions: 17"W x 11.25"D x 1.75"H
Technical Tools
PDF Documents
Manufacturer Specs
Video Input
Router
♦ Input Channels: 8
♦ Video Bandwidth: 350 MHz
♦ Input Sync Signals: Sync-on-Video; Separate C or H, V
♦ Connections: HD-15 Type
♦ High-Resolution Video: Supports conversion of RGB videos with horizontal scan rates up to 100 KHz and resolutions up to 1600x1200. Videos with progressive 480p and 720p HDTV timing are supported. RGB input levels are independently programmable.
♦ Standard Video: Accepts RGB, YUV, S-Video (Y/C), and Composite in both NTSC and PAL formats. Input levels are independently programmable for RGB and YUV sources.
♦ Programmable luminance and chrominance levels are provided for S-Video, and Hue and Saturation controls are provided for NTSC/PAL inputs.
♦ Synchronization: The unit automatically locks to the incoming video source. Video Output
Connectors:
Main Outputs: Two independently buffered RGBHV outputs with HD-15 connectors
Format: User-selectable in the following formats:
VGA (640x480) SVGA (800x600)
XGA (1024x768) SXGA(1280x1024)
Syncs: Separate C or H/V.
rame Rate: User selectable 50Hz, 59.94Hz and 75Hz. (75Hz not available for SXGA)
Mixing and Transition Effects: The unit supports seamless switching between sources, including the following transition effects: cut, dissolve and wipes. Transition time and wipe directions are fully programmable.
Audio Inputs
Universal A/V Inputs: (7) stereo audio channels, 5-pin MCO Male connector.
Microphone Jack: One non-switched MIC input, 3-pin MCO Male connector.
Line Input: One non-switched LINE input, 5-pin MCO Male connector.
Audio Levels: Accepts Consumer or Professional signal levels.
Audio Mixing: MIC and LINE audio are mixed with audio from the selected A/V input.
Audio Output
1 stereo audio channel, 5-pin MCO Male connectors.
Levels: Outputs Consumer or Professional signal levels.
User Controls
A/V Source Selection: (8) illuminated keys support selection of A/V inputs or a stored logo image.
Audio Volume/Muting Control: Independent control for Main Volume, LINE Volume, MIC volume and each of the seven A/V inputs.
Video Transition Effects: Cut, dissolve, and wipe effects with programmable duration.
Setup Controls: A vacuum fluorescent display, control knob, and (8) keys provide a menu-based front panel interface to support all setup functions.
Remote Control
Reconfigurable RS-232 port for real-time control. Serial command format is compatible with Folsom/Vista Control Systems "SmartShow" format.
Physical
Input Power: 115/130 VAC, 47-63 Hz,1.0 – 0.5 A.
Environmental
Temperature: 32 to 104° F
Humidity: 0-95% non-condensing
Note: unit is 19” wide with rack-mount option.
Router
♦ Input Channels: 8
♦ Video Bandwidth: 350 MHz
♦ Input Sync Signals: Sync-on-Video; Separate C or H, V
♦ Connections: HD-15 Type
♦ High-Resolution Video: Supports conversion of RGB videos with horizontal scan rates up to 100 KHz and resolutions up to 1600x1200. Videos with progressive 480p and 720p HDTV timing are supported. RGB input levels are independently programmable.
♦ Standard Video: Accepts RGB, YUV, S-Video (Y/C), and Composite in both NTSC and PAL formats. Input levels are independently programmable for RGB and YUV sources.
♦ Programmable luminance and chrominance levels are provided for S-Video, and Hue and Saturation controls are provided for NTSC/PAL inputs.
♦ Synchronization: The unit automatically locks to the incoming video source. Video Output
Connectors:
Main Outputs: Two independently buffered RGBHV outputs with HD-15 connectors
Format: User-selectable in the following formats:
VGA (640x480) SVGA (800x600)
XGA (1024x768) SXGA(1280x1024)
Syncs: Separate C or H/V.
rame Rate: User selectable 50Hz, 59.94Hz and 75Hz. (75Hz not available for SXGA)
Mixing and Transition Effects: The unit supports seamless switching between sources, including the following transition effects: cut, dissolve and wipes. Transition time and wipe directions are fully programmable.
Audio Inputs
Universal A/V Inputs: (7) stereo audio channels, 5-pin MCO Male connector.
Microphone Jack: One non-switched MIC input, 3-pin MCO Male connector.
Line Input: One non-switched LINE input, 5-pin MCO Male connector.
Audio Levels: Accepts Consumer or Professional signal levels.
Audio Mixing: MIC and LINE audio are mixed with audio from the selected A/V input.
Audio Output
1 stereo audio channel, 5-pin MCO Male connectors.
Levels: Outputs Consumer or Professional signal levels.
User Controls
A/V Source Selection: (8) illuminated keys support selection of A/V inputs or a stored logo image.
Audio Volume/Muting Control: Independent control for Main Volume, LINE Volume, MIC volume and each of the seven A/V inputs.
Video Transition Effects: Cut, dissolve, and wipe effects with programmable duration.
Setup Controls: A vacuum fluorescent display, control knob, and (8) keys provide a menu-based front panel interface to support all setup functions.
Remote Control
Reconfigurable RS-232 port for real-time control. Serial command format is compatible with Folsom/Vista Control Systems "SmartShow" format.
Physical
Input Power: 115/130 VAC, 47-63 Hz,1.0 – 0.5 A.
Environmental
Temperature: 32 to 104° F
Humidity: 0-95% non-condensing
Note: unit is 19” wide with rack-mount option.