D10C2
AJA
D10C2
AJA D10C2 Serial Digital to Analog Component/Composite Converter
This device converts Component Serial Digital (SDI) to analog Composite or Component formats. It provides four analog outputs and two equalized and re-clocked SDI loop-through outputs. The D10C2 automatically configures to 525 or 625 line component digital inputs and outputs analog NTSC (525 line input), PAL (625 line input) or component as configured by the dip switches.
The D10C2 encodes the full dynamic range of input component video—values below black and above white are not clipped. In the NTSC mode, the 7.5 IRE pedestal can be disabled by dip switch selection.
The D10C2 encodes the full dynamic range of input component video—values below black and above white are not clipped. In the NTSC mode, the 7.5 IRE pedestal can be disabled by dip switch selection.
Dimensions: 5.79"W x 3.11"H x 0.98"D
Technical Tools
PDF Documents
- Product Manual - AJA - D10C2 (672 KB)
Manufacturer Specs
Serial Input: SMPTE 259M 270MB, (SDI)
SDI Cable Equalization: 300 meter 8281 typical
Serial Outputs: Equalized, Re-clocked
Frequency Response
± .15dB to 5.5MHz (Y)
± .15dB to 2.5MHz (Chroma - Component, RGB)
± .15dB to 1.3MHz (Chroma - Composite)
2T K factor: < 0.5% (Y)
Differential Gain: < 1.5%
Differential Phase: < 1.5 degree
Y/C delay: 10ns maximum
D/A Converters: 10 bits, 4X oversampling
Signal Path: 10 bits
Delay (input to output): 1.5µs
Output level adjustment: ± 20% (internal)
Output level matching: 1.5% or 10mv (All outputs are separately buffered)
Power (AJA power supply model DWP): 5v DC regulated, 4 watt
SDI Cable Equalization: 300 meter 8281 typical
Serial Outputs: Equalized, Re-clocked
Frequency Response
± .15dB to 5.5MHz (Y)
± .15dB to 2.5MHz (Chroma - Component, RGB)
± .15dB to 1.3MHz (Chroma - Composite)
2T K factor: < 0.5% (Y)
Differential Gain: < 1.5%
Differential Phase: < 1.5 degree
Y/C delay: 10ns maximum
D/A Converters: 10 bits, 4X oversampling
Signal Path: 10 bits
Delay (input to output): 1.5µs
Output level adjustment: ± 20% (internal)
Output level matching: 1.5% or 10mv (All outputs are separately buffered)
Power (AJA power supply model DWP): 5v DC regulated, 4 watt