5600MSC
Evertz
5600MSC
Evertz 5600MSC Master Sync Pulse Generator/Clock
This is both a broadcast quality master sync pulse generator (SPG) and a master clock. It provides all of the synchronizing signals needed in a 21st century TV station or post production facility at the same time as solving the problem of locking the in-house master clock system to the master video sync pulse generator.
Product Weight: 8 lbs
Dimensions: 19"W x 1.75"H x 18.75"D
Technical Tools
PDF Documents
- Product Manual - Evertz - 5600MSC (228 KB)
- Manufacturer Data Sheet - Evertz - 5600MSC (228 KB)
Manufacturer Specs
Analog Sync Outputs
Standards:
SMPTE 170M (NTSC-M)
ITU-R BT 1700-1 (PAL-B)
625i/48Hz/47.95Hz (Slow-PAL)
SMPTE 274M (1080i/60, 1080i/50,1080p/30, 1080p/30sF, 1080p/25, 1080p/25sF, 1080p/24, 1080p/24sF and the 1/1.001 divisor versions where applicable)
SMPTE 296M (720/60, 720p/59.94, 720p/50), 1Hz and 6Hz pulse (and the 1/1.001 divisor versions)
Connector: 6 BNC per IEC 60169-8 Amendment 2
Number of Outputs: 6 (2 banks of 3), all independently timeable, configured as one of the following:
6 color black (black & burst) - selectable with VITC On/Off
6 HD tri-level sync
3 color black (black & burst) and 3 HD tri-level sync
DC Offset: 0V ±0.1V
Return Loss: > 40dB up to 5MHz
SNR: > 75dB
10MHz Input and Output
Input: 0.5V p-p min level, 75Ω (Relay Bypass Protected)
Output: 1V p-p (75Ω terminated)
Connector: BNC per IEC 60169-8 Amendment 2
Signal Type: Sine wave. Harmonics < 40dB typical
Long Term Oscillator Stability:
Free Running: 0.01ppm
External Ref: 5 or 10 MHz external reference autodetect (max locking range ± 0.1ppm), GPS with +GP option
LTC Outputs
Standard: SMPTE 12M
Frame Rate: Nominal 24, 25, and 30 (drop frame and non-drop frame)
Number of outputs: 2
Connectors: 3-pin male XLR type, Female DB9
Level:
Unpowered: Adjustable, 0.5V to 4.5V p-p
Powered: 2V p-p with 11V DC offset to drive downstream 1200 series slave clocks
Output Impedance: 66Ω balanced (unpowered)
Rise Time: 40 ±10μs
Jitter: < 2μs
Communications and Control
Serial Port:
Connector: Female DB-9
Level: RS232
Baud Rate: 57.6 Kbaud
Format: 8 data bits, no parity, 2 stop bits
GPS Receiver (with "+GP" option installed)
Temperature: -40°F to +158°F
Humidity: 95% R.H. Condensing at 60°C
Dimensions: 5.8" D x 3.9" H (147mm x 100mm)
Modem (with "+M" option installed)
Connector: RJ-11 telephone jack
Baud Rate: 300 baud Bell 103 compatible
Ethernet
Network Type:
Fast Ethernet 100 Base-TX IEEE 802.3u standard for 100 Mb/s baseband CSMA/CD local area network.
Ethernet 10 Base-T IEEE 802.3 standard for 10 Mb/s baseband CSMA/CD local area network.
Connector: RJ-45
Function:
VistaLINK® control
NTP port with +T option installed
NTP Port (+T option installed)
Standard: RFC-1305 compliant, broadast and server mode support
Time must be referenced to GPS or or VITC or have been synchronized via modem within the last 10 days (as per RFC1305)
DARS & AES Test Generator Outputs (with +STG option installed)
Standard:
Unbalanced: SMPTE 276M single ended AES (24-bits) (1V p-p into 75Ω)
Balanced: AES3-1992 (24-bits) (4Vp-p unterminated)
Number of Outputs:
DARS: 1 unbalanced, 1 balanced
AES Test Gen: 1 unbalanced, 1 balanced
Connector:
Unbalanced: BNC per IEC 60169-8 Amendment 2
Balanced: Removable Terminal Strip
Sampling Rate: 48kHz
Impedance:
Unbalanced: 75Ω unbalanced
Balanced: 110Ω balanced
Return Loss: > 25dB to 10MHz (with external 75Ω termination)
AES Tones: Menu selectable
Genlock Input
Type: Autodetects standard SMPTE 170M (NTSC-M), ITU-R BT.1700-1 (PAL-B), Color Black 1V p-p with optional VITC, Composite Bi-level sync (525i/59.94 or 625i/50) 300mV, HD Tri-level Sync (same HD standards as sync outputs)
Number of Inputs: 1
Connector: BNC per IEC 60169-8 Amendment 2
Video: Max: 2V p-p video
Min: Sync level 150mV
Frequency Lock
Range: ±50ppm from nominal
Input Impedance: High impedance, isolated, differential - external termination required
Return Loss: > 25dB to 10MHz (with external 75Ω termination)
Analog Composite Video Test Signal Generator (with "+STG" option installed)
Standard: SMPTE 170M (NTSC-M), ITU-R BT.1700-1 470-6 (PAL-B)
Number of Outputs: 1
Connector: BNC per IEC 60169-8 Amendment 2
Signal Level: 1V p-p nominal
DC Offset: 0V ±0.1V
Output Impedance: 75Ω
Return Loss: >35dB to 10MHz (with external 75Ω termination)
SNR: > 75dB
SDI Test Generator Outputs (with "+STG"option installed)
Standard: SMPTE 259M-C (270Mb/s)
Number of Outputs: 2 outputs of selected test signal, 2 outputs of black video
Embedded Audio: Up to 4 groups as specified in SMPTE 259M
Connectors: BNC per IEC 60169-8 Amendment 2
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 900ps nominal
Overshoot: < 10% of amplitude
Return Loss: > 15 dB up to 270Mb/s
Jitter: < 0.2 UI
Genlock: Provided internally by 5600MSC
Analog Audio Tone Generator (with "+STG" option installed)
Number of Outputs: 2
Type: Balanced analog audio
Connector: 6 pins on 12-pin removable terminal strips
Output Impedance: 66Ω
Signal Level: -20 to +8dBu into 10kW load
HDTV Test Generator Outputs (with "+HTG" option installed)
Standards: SMPTE 292M 4:2:2, YCbCr, SMPTE 372M dual link 4:4:4 GBRA or YCbCr, Same standards as HD sync outputs
Number of Outputs:
4:2:2: 2 outputs of selected test signal, 2 outputs of black video
4:4:4: 2 dual link outputs of selected test signal
Embedded Audio:
Up to 4 audio groups as specified in SMPTE 299M.
Selectable tone frequencies (from 60Hz to 10kHz) and audio group.
Audio can be embedded on test signal or black or both outputs.
Connector: BNC per IEC 60169-8 Amendment 2
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 200ps nominal
Overshoot: < 10% of amplitude
Jitter: < 0.2 UI
Genlock Input: HD Tri-level Sync or NTSC or PAL, Color Black 1V p-p, (provided from one of the Sync outputs)
Word Clock Output (with +WC option installed)
Signal: 0,0V-0.5V, 48KHz Word Clock
Connector: BNC per IEC 60169-8 Amendment 2
Number of Outputs: 1
General Purpose Inputs and Output
Number of Inputs: 2
Number of Outputs: 2 (function menu selectable)
Type: Opto-isolated, active low with internal pull-ups to +5 volts
Connector: 4 pins plus 2 ground pins on 9-pin female D connector
Signal Level: +5V nominal
Electrical:
Voltage: Auto ranging 100 to 240 Volts AC, 50/60Hz
Configuration: Optional redundant supply available with +2PS option
Power: 90 W max (all options installed)
Safety:
ETL Listed, Complies with EU safety directives
EMI/RFI: Complies with FCC Part 15 Class A and EU EMC Directive
Standards:
SMPTE 170M (NTSC-M)
ITU-R BT 1700-1 (PAL-B)
625i/48Hz/47.95Hz (Slow-PAL)
SMPTE 274M (1080i/60, 1080i/50,1080p/30, 1080p/30sF, 1080p/25, 1080p/25sF, 1080p/24, 1080p/24sF and the 1/1.001 divisor versions where applicable)
SMPTE 296M (720/60, 720p/59.94, 720p/50), 1Hz and 6Hz pulse (and the 1/1.001 divisor versions)
Connector: 6 BNC per IEC 60169-8 Amendment 2
Number of Outputs: 6 (2 banks of 3), all independently timeable, configured as one of the following:
6 color black (black & burst) - selectable with VITC On/Off
6 HD tri-level sync
3 color black (black & burst) and 3 HD tri-level sync
DC Offset: 0V ±0.1V
Return Loss: > 40dB up to 5MHz
SNR: > 75dB
10MHz Input and Output
Input: 0.5V p-p min level, 75Ω (Relay Bypass Protected)
Output: 1V p-p (75Ω terminated)
Connector: BNC per IEC 60169-8 Amendment 2
Signal Type: Sine wave. Harmonics < 40dB typical
Long Term Oscillator Stability:
Free Running: 0.01ppm
External Ref: 5 or 10 MHz external reference autodetect (max locking range ± 0.1ppm), GPS with +GP option
LTC Outputs
Standard: SMPTE 12M
Frame Rate: Nominal 24, 25, and 30 (drop frame and non-drop frame)
Number of outputs: 2
Connectors: 3-pin male XLR type, Female DB9
Level:
Unpowered: Adjustable, 0.5V to 4.5V p-p
Powered: 2V p-p with 11V DC offset to drive downstream 1200 series slave clocks
Output Impedance: 66Ω balanced (unpowered)
Rise Time: 40 ±10μs
Jitter: < 2μs
Communications and Control
Serial Port:
Connector: Female DB-9
Level: RS232
Baud Rate: 57.6 Kbaud
Format: 8 data bits, no parity, 2 stop bits
GPS Receiver (with "+GP" option installed)
Temperature: -40°F to +158°F
Humidity: 95% R.H. Condensing at 60°C
Dimensions: 5.8" D x 3.9" H (147mm x 100mm)
Modem (with "+M" option installed)
Connector: RJ-11 telephone jack
Baud Rate: 300 baud Bell 103 compatible
Ethernet
Network Type:
Fast Ethernet 100 Base-TX IEEE 802.3u standard for 100 Mb/s baseband CSMA/CD local area network.
Ethernet 10 Base-T IEEE 802.3 standard for 10 Mb/s baseband CSMA/CD local area network.
Connector: RJ-45
Function:
VistaLINK® control
NTP port with +T option installed
NTP Port (+T option installed)
Standard: RFC-1305 compliant, broadast and server mode support
Time must be referenced to GPS or or VITC or have been synchronized via modem within the last 10 days (as per RFC1305)
DARS & AES Test Generator Outputs (with +STG option installed)
Standard:
Unbalanced: SMPTE 276M single ended AES (24-bits) (1V p-p into 75Ω)
Balanced: AES3-1992 (24-bits) (4Vp-p unterminated)
Number of Outputs:
DARS: 1 unbalanced, 1 balanced
AES Test Gen: 1 unbalanced, 1 balanced
Connector:
Unbalanced: BNC per IEC 60169-8 Amendment 2
Balanced: Removable Terminal Strip
Sampling Rate: 48kHz
Impedance:
Unbalanced: 75Ω unbalanced
Balanced: 110Ω balanced
Return Loss: > 25dB to 10MHz (with external 75Ω termination)
AES Tones: Menu selectable
Genlock Input
Type: Autodetects standard SMPTE 170M (NTSC-M), ITU-R BT.1700-1 (PAL-B), Color Black 1V p-p with optional VITC, Composite Bi-level sync (525i/59.94 or 625i/50) 300mV, HD Tri-level Sync (same HD standards as sync outputs)
Number of Inputs: 1
Connector: BNC per IEC 60169-8 Amendment 2
Video: Max: 2V p-p video
Min: Sync level 150mV
Frequency Lock
Range: ±50ppm from nominal
Input Impedance: High impedance, isolated, differential - external termination required
Return Loss: > 25dB to 10MHz (with external 75Ω termination)
Analog Composite Video Test Signal Generator (with "+STG" option installed)
Standard: SMPTE 170M (NTSC-M), ITU-R BT.1700-1 470-6 (PAL-B)
Number of Outputs: 1
Connector: BNC per IEC 60169-8 Amendment 2
Signal Level: 1V p-p nominal
DC Offset: 0V ±0.1V
Output Impedance: 75Ω
Return Loss: >35dB to 10MHz (with external 75Ω termination)
SNR: > 75dB
SDI Test Generator Outputs (with "+STG"option installed)
Standard: SMPTE 259M-C (270Mb/s)
Number of Outputs: 2 outputs of selected test signal, 2 outputs of black video
Embedded Audio: Up to 4 groups as specified in SMPTE 259M
Connectors: BNC per IEC 60169-8 Amendment 2
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 900ps nominal
Overshoot: < 10% of amplitude
Return Loss: > 15 dB up to 270Mb/s
Jitter: < 0.2 UI
Genlock: Provided internally by 5600MSC
Analog Audio Tone Generator (with "+STG" option installed)
Number of Outputs: 2
Type: Balanced analog audio
Connector: 6 pins on 12-pin removable terminal strips
Output Impedance: 66Ω
Signal Level: -20 to +8dBu into 10kW load
HDTV Test Generator Outputs (with "+HTG" option installed)
Standards: SMPTE 292M 4:2:2, YCbCr, SMPTE 372M dual link 4:4:4 GBRA or YCbCr, Same standards as HD sync outputs
Number of Outputs:
4:2:2: 2 outputs of selected test signal, 2 outputs of black video
4:4:4: 2 dual link outputs of selected test signal
Embedded Audio:
Up to 4 audio groups as specified in SMPTE 299M.
Selectable tone frequencies (from 60Hz to 10kHz) and audio group.
Audio can be embedded on test signal or black or both outputs.
Connector: BNC per IEC 60169-8 Amendment 2
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 200ps nominal
Overshoot: < 10% of amplitude
Jitter: < 0.2 UI
Genlock Input: HD Tri-level Sync or NTSC or PAL, Color Black 1V p-p, (provided from one of the Sync outputs)
Word Clock Output (with +WC option installed)
Signal: 0,0V-0.5V, 48KHz Word Clock
Connector: BNC per IEC 60169-8 Amendment 2
Number of Outputs: 1
General Purpose Inputs and Output
Number of Inputs: 2
Number of Outputs: 2 (function menu selectable)
Type: Opto-isolated, active low with internal pull-ups to +5 volts
Connector: 4 pins plus 2 ground pins on 9-pin female D connector
Signal Level: +5V nominal
Electrical:
Voltage: Auto ranging 100 to 240 Volts AC, 50/60Hz
Configuration: Optional redundant supply available with +2PS option
Power: 90 W max (all options installed)
Safety:
ETL Listed, Complies with EU safety directives
EMI/RFI: Complies with FCC Part 15 Class A and EU EMC Directive