7713HDC
Evertz
7713HDC
Evertz 7713HDC HD Broadcast Downconverter/Distribution Amplifier
This HD broadcast downconverter card is a reclocking HD serial digital video distribution amplifier and a high quality downconverter for 1.5Gb/s HDTV signals and a monitoring distribution amplifier for standard definition 270Mb/s signals.
It provides 4 reclocked DA outputs and 3 downconverted SDI or composite analog NTSC/PAL outputs (selectable) and accepts all popular international SMPTE 292M video formats.
It provides 4 reclocked DA outputs and 3 downconverted SDI or composite analog NTSC/PAL outputs (selectable) and accepts all popular international SMPTE 292M video formats.
Technical Tools
PDF Documents
Manufacturer Specs
SERIAL VIDEO INPUT:
Standard: 270 Mb/s SMPTE 259M - pass through mode 1.485 Gb/s SMPTE 292M – autodetects standard SMPTE 260M, SMPTE 274M, SMPTE 296M, SMPTE 349M
Connector: BNC per IEC 60169-8 Amendment 2
Input Equalization: Automatic to 100m @ 1.5Gb/s with Belden 1694A or equivalent cable
Return Loss: >15 dB up to 1.5GHz
RECLOCKED SERIAL VIDEO DA OUTPUTS:
Standard: Same as input
Number of Outputs: 4 reclocked
Connector: BNC per IEC 60169-8 Amendment 2
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 200ps nominal for HD, 750ps nominal for SD
Overshoot: <10% of amplitude
Return Loss: > 15 dB at 1.5 Gb/s
Jitter: < 0.2 UI
DOWNCONVERTED SERIAL VIDEO OUTPUTS:
Standard: SMPTE 259M-C (270 Mb/s)
Number of Outputs: up to 3 Per Card (jumper selectable)
Connector: BNC per IEC 60169-8 Amendment 2.
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 750ps nominal
Overshoot: <10% of amplitude
Return Loss: > 15 dB at 270 Mb/s
Jitter: < 0.2 UI
DOWNCONVERTED COMPOSITE ANALOG VIDEO OUTPUTS:
Standards: Analog composite NTSC (SMPTE 170M) or Analog composite PAL (ITU-R BT.470)
Number of Outputs: up to 3 Per Card (jumper selectable)
Connectors: BNC per IEC 60169-8 Amendment 2.
Signal Level: 1 V p-p nominal
DC Offset: 0V ±0.1V
Return Loss: >35dB up to 5 MHz
Frequency Response: 0.1dB to 4 MHz, 0.15dB to 5.5 MHz
Differential Phase: <0.5°(<0.3° typical)
Differential Gain: <0.8% (<0.5 % typical)
SNR: >78dB to 5 MHz (shallow ramp)
Impedance: 75Ω
GENLOCK INPUT:
Type: NTSC or PAL Color Black 1 V p-p
Connector: BNC per IEC 60169-8 Amendment 2 or Frame Genlock on 7700FR-G frames
(selectable)
Termination: High impedance or internal 75 ohm termination (jumper selectable)
6 HZ INPUT:
Type: TTL level active high pulse 1/30 second wide
Connector: BNC per IEC 60169-8 Amendment 2 (jumper selectable)
Termination: 500 ohm
INPUT TO OUTPUT PROCESSING DELAY (HD INPUT VIDEO)
Video Delay: Approximately 1 to 2 frames depending on input video format, processing mode and phase setting
Audio Delay: Audio is delayed and re-embedded in time with the output picture
ELECTRICAL:
Voltage: +12VDC
Power: 10 Watts
EMI/RFI: Complies with FCC Part 15, Class A, EU EMC Directive
Physical:
Number of slots: 1
Standard: 270 Mb/s SMPTE 259M - pass through mode 1.485 Gb/s SMPTE 292M – autodetects standard SMPTE 260M, SMPTE 274M, SMPTE 296M, SMPTE 349M
Connector: BNC per IEC 60169-8 Amendment 2
Input Equalization: Automatic to 100m @ 1.5Gb/s with Belden 1694A or equivalent cable
Return Loss: >15 dB up to 1.5GHz
RECLOCKED SERIAL VIDEO DA OUTPUTS:
Standard: Same as input
Number of Outputs: 4 reclocked
Connector: BNC per IEC 60169-8 Amendment 2
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 200ps nominal for HD, 750ps nominal for SD
Overshoot: <10% of amplitude
Return Loss: > 15 dB at 1.5 Gb/s
Jitter: < 0.2 UI
DOWNCONVERTED SERIAL VIDEO OUTPUTS:
Standard: SMPTE 259M-C (270 Mb/s)
Number of Outputs: up to 3 Per Card (jumper selectable)
Connector: BNC per IEC 60169-8 Amendment 2.
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 750ps nominal
Overshoot: <10% of amplitude
Return Loss: > 15 dB at 270 Mb/s
Jitter: < 0.2 UI
DOWNCONVERTED COMPOSITE ANALOG VIDEO OUTPUTS:
Standards: Analog composite NTSC (SMPTE 170M) or Analog composite PAL (ITU-R BT.470)
Number of Outputs: up to 3 Per Card (jumper selectable)
Connectors: BNC per IEC 60169-8 Amendment 2.
Signal Level: 1 V p-p nominal
DC Offset: 0V ±0.1V
Return Loss: >35dB up to 5 MHz
Frequency Response: 0.1dB to 4 MHz, 0.15dB to 5.5 MHz
Differential Phase: <0.5°(<0.3° typical)
Differential Gain: <0.8% (<0.5 % typical)
SNR: >78dB to 5 MHz (shallow ramp)
Impedance: 75Ω
GENLOCK INPUT:
Type: NTSC or PAL Color Black 1 V p-p
Connector: BNC per IEC 60169-8 Amendment 2 or Frame Genlock on 7700FR-G frames
(selectable)
Termination: High impedance or internal 75 ohm termination (jumper selectable)
6 HZ INPUT:
Type: TTL level active high pulse 1/30 second wide
Connector: BNC per IEC 60169-8 Amendment 2 (jumper selectable)
Termination: 500 ohm
INPUT TO OUTPUT PROCESSING DELAY (HD INPUT VIDEO)
Video Delay: Approximately 1 to 2 frames depending on input video format, processing mode and phase setting
Audio Delay: Audio is delayed and re-embedded in time with the output picture
ELECTRICAL:
Voltage: +12VDC
Power: 10 Watts
EMI/RFI: Complies with FCC Part 15, Class A, EU EMC Directive
Physical:
Number of slots: 1