HDSD9155Q
Evertz
HDSD9155Q
Evertz HDSD9155Q HD/SD Afterburner with HQ Down Converter
This powerful device is a powerful device designed to facilitate the creation of off-line videotapes from telecine or field acquired 4:4:4 or 4:2:2 HDTV masters. It can be operated as a high quality downconverter or as a character inserter on the native HDTV signal. Embedded audio present on the input video is reinserted on the serial digital outputs in time with the picture. The Afterburner can operate in a 'film mode' working with telecine masters or a 'video mode' working with field acquired HDTV.
Product Weight: 8 lbs
Dimensions: 19"W x 1.75"H x 18.75"D
Technical Tools
PDF Documents
Manufacturer Specs
Standard
HDTV Mode
4:2:2 HDTV serial digital (SMPTE 292M)
1.485 Gb/s or 4:4:4 RGB dual link
HDTV serial digital (SMPTE 372M) 1080i/60, 1080i/59.94, 1080i/50, 1080p/29.97sF, 1080p/30sF, 1080p/25sF, 1080p/24sF, 1080p/23.98sF and 720p/59.94 - selectable or autodetect
SDTV Mode
4:2:2 SDTV serial digital 270 Mb/s (SMPTE 259M-C) 525i/59.94 and 625i/50 - selectable or autodetect
Connector: BNC per IEC 61169-8 Annex A
Equalization
Automatic to 300m @ 270Mb/s with Belden 8281 or equivalent cable
Automatic to 130m @ 1.5Gb/s with Belden 1694 or equivalent cable
Embedded Audio: SMPTE 272M or SMPTE 299M - supports up to 4 groups
Serial Digital Video Output
Standards:
Same as input or 4:2:2 serial component 270 Mb/s (SMPTE 259M-C) 525i/59.94 if output is 720p/59.94, 1080i/59.94
1080p/23.98sF 625i/50 if input is 1080i/50
Connector: BNC per IEC 61169-8 Annex A
Number: 2 program, 2 monitor
Embedded Audio: SMPTE 272M or SMPTE299M - up to 4 groups transferred from input video
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 200ps (HD) or 470ps (SD) nominal
Overshoot: <10% of amplitude
Return Loss: > 15 dB
Wide Band Jitter: < 0.2 UI
LTC Generator
Standard: SMPTE 12M-1
Frame Rate: 25 and 30 Fps nominal
Connector: 3 pin male XLR type connector
Level: Adjustable, 0.5V to 4.5V p-p
LTC Reader
Standard: SMPTE 12M-1
Frame Rate: 24, 25 and 30 Fps nominal
Connector: 3 pin female XLR type connector
Level: 0.2 to 4V p-p, balanced or unbalanced
Analog Monitor Video Output
Standards:
Inactive if MON 4:2:2 outputs are HD video rate
Analog composite NTSC if MON 4:2:2 outputs are 525i/59.94
Analog composite PAL if MON 4:2:2 outputs are 625i/50
Connector: BNC per IEC 61169-8 Annex A
Number of outputs: 1 monitor
Signal Level: 1 V p-p nominal, internally adjustable
DC Offset: 0V ±0.1V
Return Loss: >35dB up to 5 MHz
Frequency Resp: 0.8dB to 4 MHz
Differential Phase: <0.9?(<0.6? typical)
Differential Gain: <0.9% (<0.5 % typical)
SNR: >56dB to 5 MHz (shallow ramp)
Impedance: 75Ω
VITC Reader (SDTV Inputs)
Standard: SMPTE 12M-1 or RP201, 3 line VITC
Line Select: Autodetect valid line or manual insertion
VITC Generator (Downconverter SDTV mode)
Standard: SMPTE 12M-1 or RP201 (3 line VITC)
Line Select:
525i/59.94 10-20
625i/50 6-21
Ancillary Data Reader (HDTV Inputs)
Standard: SMPTE 12M-2 Ancillary Time code or RP215 Film Transfer Data
Line Select: Autodetect valid lines in vertical interval
Frame Rate: 24, 25 and 30 Fps nominal
Ethernet
Network Type:
Fast Ethernet 100 Base-TX IEEE
802.3u standard for 100 Mbps baseband CSMA/CD local area network Ethernet 10 Base-T IEEE
802.3 standard for 10 Mbps baseband CSMA/CD local area network
Connector: RJ-45
Function: Firmware upgrades via FTP, control and monitoring using KeyLog TRACKER™ software
Serial Communications
Standard: RS-232, 57600 baud, 8 bits, no parity
Format: 8 data bits, no parity, 2 stop bits
Number or ports: 2
Connector: 9 pin female "D"
Function
Serial Control: Control/monitoring using KeyLog TRACKER™ software
Aux COM: Transmit VANC data packets, debug monitoring and control
General Purpose Inputs and Outputs
Type:
3 high impedance inputs, with 1M Ω pull up to +5V
2 open collector outputs, 1M Ω pull up to +5V
Menu selectable functions
Connector: 9 pin female "D"
Electrical
Power: Auto ranging 100-240 VAC 50/60 Hz, 40 Watts, ETL listed
Complies with EU safety directive
EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive
HDTV Mode
4:2:2 HDTV serial digital (SMPTE 292M)
1.485 Gb/s or 4:4:4 RGB dual link
HDTV serial digital (SMPTE 372M) 1080i/60, 1080i/59.94, 1080i/50, 1080p/29.97sF, 1080p/30sF, 1080p/25sF, 1080p/24sF, 1080p/23.98sF and 720p/59.94 - selectable or autodetect
SDTV Mode
4:2:2 SDTV serial digital 270 Mb/s (SMPTE 259M-C) 525i/59.94 and 625i/50 - selectable or autodetect
Connector: BNC per IEC 61169-8 Annex A
Equalization
Automatic to 300m @ 270Mb/s with Belden 8281 or equivalent cable
Automatic to 130m @ 1.5Gb/s with Belden 1694 or equivalent cable
Embedded Audio: SMPTE 272M or SMPTE 299M - supports up to 4 groups
Serial Digital Video Output
Standards:
Same as input or 4:2:2 serial component 270 Mb/s (SMPTE 259M-C) 525i/59.94 if output is 720p/59.94, 1080i/59.94
1080p/23.98sF 625i/50 if input is 1080i/50
Connector: BNC per IEC 61169-8 Annex A
Number: 2 program, 2 monitor
Embedded Audio: SMPTE 272M or SMPTE299M - up to 4 groups transferred from input video
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 200ps (HD) or 470ps (SD) nominal
Overshoot: <10% of amplitude
Return Loss: > 15 dB
Wide Band Jitter: < 0.2 UI
LTC Generator
Standard: SMPTE 12M-1
Frame Rate: 25 and 30 Fps nominal
Connector: 3 pin male XLR type connector
Level: Adjustable, 0.5V to 4.5V p-p
LTC Reader
Standard: SMPTE 12M-1
Frame Rate: 24, 25 and 30 Fps nominal
Connector: 3 pin female XLR type connector
Level: 0.2 to 4V p-p, balanced or unbalanced
Analog Monitor Video Output
Standards:
Inactive if MON 4:2:2 outputs are HD video rate
Analog composite NTSC if MON 4:2:2 outputs are 525i/59.94
Analog composite PAL if MON 4:2:2 outputs are 625i/50
Connector: BNC per IEC 61169-8 Annex A
Number of outputs: 1 monitor
Signal Level: 1 V p-p nominal, internally adjustable
DC Offset: 0V ±0.1V
Return Loss: >35dB up to 5 MHz
Frequency Resp: 0.8dB to 4 MHz
Differential Phase: <0.9?(<0.6? typical)
Differential Gain: <0.9% (<0.5 % typical)
SNR: >56dB to 5 MHz (shallow ramp)
Impedance: 75Ω
VITC Reader (SDTV Inputs)
Standard: SMPTE 12M-1 or RP201, 3 line VITC
Line Select: Autodetect valid line or manual insertion
VITC Generator (Downconverter SDTV mode)
Standard: SMPTE 12M-1 or RP201 (3 line VITC)
Line Select:
525i/59.94 10-20
625i/50 6-21
Ancillary Data Reader (HDTV Inputs)
Standard: SMPTE 12M-2 Ancillary Time code or RP215 Film Transfer Data
Line Select: Autodetect valid lines in vertical interval
Frame Rate: 24, 25 and 30 Fps nominal
Ethernet
Network Type:
Fast Ethernet 100 Base-TX IEEE
802.3u standard for 100 Mbps baseband CSMA/CD local area network Ethernet 10 Base-T IEEE
802.3 standard for 10 Mbps baseband CSMA/CD local area network
Connector: RJ-45
Function: Firmware upgrades via FTP, control and monitoring using KeyLog TRACKER™ software
Serial Communications
Standard: RS-232, 57600 baud, 8 bits, no parity
Format: 8 data bits, no parity, 2 stop bits
Number or ports: 2
Connector: 9 pin female "D"
Function
Serial Control: Control/monitoring using KeyLog TRACKER™ software
Aux COM: Transmit VANC data packets, debug monitoring and control
General Purpose Inputs and Outputs
Type:
3 high impedance inputs, with 1M Ω pull up to +5V
2 open collector outputs, 1M Ω pull up to +5V
Menu selectable functions
Connector: 9 pin female "D"
Electrical
Power: Auto ranging 100-240 VAC 50/60 Hz, 40 Watts, ETL listed
Complies with EU safety directive
EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive