MSW-M2000
Sony
MSW-M2000
Sony MSW-M2000 IMX Editor
This MPEG IMX recorder has an SDTI-CP interface in addition to conventional digital and analog inputs/outputs. SDTI-CP is an industry standardized, open, interoperable interface that is defined by SMPTE 326M. With SDTI-CP I/O, the MPEG Elementary Stream can be interfaced to compatible products from several different manufacturers without the need of decoding/encoding. There are a number of SDTI-CP equipped non-linear editors and servers available from leading manufactures, including Sony, to give you the best possible choice.
With MPEG IMX equipment, there is no barrier keeping you in a closed world. Rather, you can enjoy the unlimited open MPEG World, and its freedom to choose equipment from world-leading manufacturers.
With MPEG IMX equipment, there is no barrier keeping you in a closed world. Rather, you can enjoy the unlimited open MPEG World, and its freedom to choose equipment from world-leading manufacturers.
Technical Tools
PDF Documents
Manufacturer Specs
General
Tape speed
MPEG IMX: 64.5 (525)/53.8 (625) mm/s
Digital Betacam: 96.7 mm/s
Betacam SX: 59.6 (525) / 59.6 (625) mm/s
Betacam/Betacam SP: 118.6 (525) / 101.51 (625) mm/s
MPEG IMX playback time: Max. 184 (525) / 224 (625) min with BCT-184MXL cassette
Fast forward/rewind time: Approx. 3.5 min with BCT-184MXL cassette
Search speed range
MPEG IMX: -78 times normal playback speed
Digital Betacam: -50 times normal playback speed
Betacam SX: -78 times normal playback speed
Betacam/Betacam SP: -35 (525) / -42 (625) times normal playback speed
Servo lock time: 0.5 (525) / 0.7 (625) sec or less (from standby on)
Load/unload time: 6 sec or less
Input/Output Signals
Analog composite input: BNC (x 2, including one loop through output ), 1.0 Vp-p, 75 Ω, sync negative
Analog composite output: BNC (x 3, including one character out ), 1.0 Vp-p, 75 Ω, sync negative
Analog component input: BNC (x 3, for 1 set, Y/R-Y/B-Y ),Y: 1.0 Vp-p, 75 Ω, sync negative, R-Y/B-Y: 0.7 Vp-p, 75 Ω
Analog component output: BNC (x 3, for 1 set, Y/R-Y/B-Y ),Y: 1.0 Vp-p, 75 Ω, sync negative, R-Y/B-Y: 0.7 Vp-p, 75 Ω
SDI input: BNC (x 2, including one active through out), SMPTE 259M (ITU-R BT.656-3), 270 Mb/s
SDI output: BNC (x 3, including one character out), SMPTE 259M (ITU-R BT.656-3), 270 Mb/s
SDTI-CP input: BNC (x 1), SMPTE 326M (SDTI-CP)
SDTI-CP output: BNC (x 2), SMPTE 326M (SDTI-CP)
Analog audio input: XLR (x 4) (4-ch: channel selectable)
Analog audio output: XLR (x 4) (4-ch: channel selectable)
Cue audio output: XLR (x 1)
Digital audio input (CH 1/2, 3/4, 5/6, 7/8), AES/EBU: BNC (x 4), default 48 kHz (32 to 48 kHz with Sample Rate converter), Complies with AES-3id-1995
Digital audio output (CH 1/2, 3/4, 5/6, 7/8), AES/EBU: BNC (x 4), 48 kHz fixed, Complies with AES-3id-1995
Remote control
Remote (RS-422A): D-sub 9-pin (x 2), Sony 9-pin remote interface (female)
RS-232C (ISR*): D-sub 9-pin (x 1), RS-232C interface (male)
Parallel remote: D-sub 50-pin (x 1) (female)
Video control (1): D-sub 15-pin (x 1) (male)
Control panel: Circular connector 10-pin
Time code input: XLR (x 1)
Time code output: XLR (x 1)
Memory card insertion slot: PCMCIA (x1)
Monitor output L/R: XLR (x 2) (channel selectable)
Phones: JM-60 Stereo phone jack
Processor Adjustment Range
Video level: -3 dB/ -∞ to 3 dB selectable
Chroma level: -3 dB/ -∞ to 3 dB selectable
Set up/black level: -30 IRE/-210 mV
Chroma phase/hue: -30°
System sync phase: -15 µs
System SC phase: -200 ns
Y/C delay: -100 ns (Betacam/Betacam SP playback only)
Digital Video Performance
Sampling frequency: Y: 13.5 MHz, R-Y/B-Y: 6.75 MHz
Quantization: MPEG IMX/Betcam SX: 8 bits/sample, Digital Betacam: 10 bits/sample
Error correction: Reed-Solomon code
Digital input to analog component output
D/A quantization: 10 bits/sample
Bandwidth: 0 to 5.75 MHz -0.5 dB
S/N ratio: 56 dB or more
K-factor (2T pulse): 1% or less
Analog component input to analog component output (MPEG IMX record/playback)
A/D and D/A quantization: 10 bits/sample
Bandwidth: Y: 0 to 5.75 MHz +0.5/-2.0 dB, R-Y/B-Y: 0 to 2.75 MHz +0.5/-2.0 dB
S/N ratio: 52 dB or more
K-factor (2T pulse): 1% or less
LF non-linearity: 3.0% or less
Analog composite input to analog composite output (MPEG IMX record/playback)
A/D and D/A quantization: 10 bits/sample
Bandwidth: 0 to 5.75 MHz +0.5/-2.0 dB
S/N ratio: 53 dB or more
Differential gain: 2% or less
Differential phase: 2° or less
Y/C delay: 20 ns or less
K-factor (2T pulse): 1% or less
Digital Audio Performance
Sampling Frequency: 48 kHz (synchronized with video)
Quantization
MPEG IMX: 16 or 24 bits/sample (selectable)
Betacam SX: 16 bits/sample
Digital Betacam: 20 bits/sample
Analog input to analog output (MPEG IMX record/playback)
A/D and D/A quantization: 24 bits/sample
Frequency response (0 dB at 1kHz): 20Hz to 20kHz +0.5/-1.0 dB
Dynamic range (at 1 kHz, emphasis ON): More than 90 dB (16 bits mode), More than 95 dB (24bits mode)
Distortion (at 1 kHz, emphasis ON, reference level): Less than 0.05%
Cross talk (at 1 kHz, between any two channels): Less than - 80 dB
Wow & flutter: Below measurable level
Head room: 20 dB (18 dB selectable)
Emphasis (ON/OFF selectable in REC mode): T1=50 µs, T2=15 µs
Environmental
Power requirements: AC 100 to 240 VAC, 50/60 Hz
Power consumption: 2A (200 W) / AC 240 V
Operating temperature: +41°F to +104°F
Storage temperature: -4°F to +140°F
Humidity: 20% to 90% (relative humidity)
*ISR: Interactive Status Reporting
Tape speed
MPEG IMX: 64.5 (525)/53.8 (625) mm/s
Digital Betacam: 96.7 mm/s
Betacam SX: 59.6 (525) / 59.6 (625) mm/s
Betacam/Betacam SP: 118.6 (525) / 101.51 (625) mm/s
MPEG IMX playback time: Max. 184 (525) / 224 (625) min with BCT-184MXL cassette
Fast forward/rewind time: Approx. 3.5 min with BCT-184MXL cassette
Search speed range
MPEG IMX: -78 times normal playback speed
Digital Betacam: -50 times normal playback speed
Betacam SX: -78 times normal playback speed
Betacam/Betacam SP: -35 (525) / -42 (625) times normal playback speed
Servo lock time: 0.5 (525) / 0.7 (625) sec or less (from standby on)
Load/unload time: 6 sec or less
Input/Output Signals
Analog composite input: BNC (x 2, including one loop through output ), 1.0 Vp-p, 75 Ω, sync negative
Analog composite output: BNC (x 3, including one character out ), 1.0 Vp-p, 75 Ω, sync negative
Analog component input: BNC (x 3, for 1 set, Y/R-Y/B-Y ),Y: 1.0 Vp-p, 75 Ω, sync negative, R-Y/B-Y: 0.7 Vp-p, 75 Ω
Analog component output: BNC (x 3, for 1 set, Y/R-Y/B-Y ),Y: 1.0 Vp-p, 75 Ω, sync negative, R-Y/B-Y: 0.7 Vp-p, 75 Ω
SDI input: BNC (x 2, including one active through out), SMPTE 259M (ITU-R BT.656-3), 270 Mb/s
SDI output: BNC (x 3, including one character out), SMPTE 259M (ITU-R BT.656-3), 270 Mb/s
SDTI-CP input: BNC (x 1), SMPTE 326M (SDTI-CP)
SDTI-CP output: BNC (x 2), SMPTE 326M (SDTI-CP)
Analog audio input: XLR (x 4) (4-ch: channel selectable)
Analog audio output: XLR (x 4) (4-ch: channel selectable)
Cue audio output: XLR (x 1)
Digital audio input (CH 1/2, 3/4, 5/6, 7/8), AES/EBU: BNC (x 4), default 48 kHz (32 to 48 kHz with Sample Rate converter), Complies with AES-3id-1995
Digital audio output (CH 1/2, 3/4, 5/6, 7/8), AES/EBU: BNC (x 4), 48 kHz fixed, Complies with AES-3id-1995
Remote control
Remote (RS-422A): D-sub 9-pin (x 2), Sony 9-pin remote interface (female)
RS-232C (ISR*): D-sub 9-pin (x 1), RS-232C interface (male)
Parallel remote: D-sub 50-pin (x 1) (female)
Video control (1): D-sub 15-pin (x 1) (male)
Control panel: Circular connector 10-pin
Time code input: XLR (x 1)
Time code output: XLR (x 1)
Memory card insertion slot: PCMCIA (x1)
Monitor output L/R: XLR (x 2) (channel selectable)
Phones: JM-60 Stereo phone jack
Processor Adjustment Range
Video level: -3 dB/ -∞ to 3 dB selectable
Chroma level: -3 dB/ -∞ to 3 dB selectable
Set up/black level: -30 IRE/-210 mV
Chroma phase/hue: -30°
System sync phase: -15 µs
System SC phase: -200 ns
Y/C delay: -100 ns (Betacam/Betacam SP playback only)
Digital Video Performance
Sampling frequency: Y: 13.5 MHz, R-Y/B-Y: 6.75 MHz
Quantization: MPEG IMX/Betcam SX: 8 bits/sample, Digital Betacam: 10 bits/sample
Error correction: Reed-Solomon code
Digital input to analog component output
D/A quantization: 10 bits/sample
Bandwidth: 0 to 5.75 MHz -0.5 dB
S/N ratio: 56 dB or more
K-factor (2T pulse): 1% or less
Analog component input to analog component output (MPEG IMX record/playback)
A/D and D/A quantization: 10 bits/sample
Bandwidth: Y: 0 to 5.75 MHz +0.5/-2.0 dB, R-Y/B-Y: 0 to 2.75 MHz +0.5/-2.0 dB
S/N ratio: 52 dB or more
K-factor (2T pulse): 1% or less
LF non-linearity: 3.0% or less
Analog composite input to analog composite output (MPEG IMX record/playback)
A/D and D/A quantization: 10 bits/sample
Bandwidth: 0 to 5.75 MHz +0.5/-2.0 dB
S/N ratio: 53 dB or more
Differential gain: 2% or less
Differential phase: 2° or less
Y/C delay: 20 ns or less
K-factor (2T pulse): 1% or less
Digital Audio Performance
Sampling Frequency: 48 kHz (synchronized with video)
Quantization
MPEG IMX: 16 or 24 bits/sample (selectable)
Betacam SX: 16 bits/sample
Digital Betacam: 20 bits/sample
Analog input to analog output (MPEG IMX record/playback)
A/D and D/A quantization: 24 bits/sample
Frequency response (0 dB at 1kHz): 20Hz to 20kHz +0.5/-1.0 dB
Dynamic range (at 1 kHz, emphasis ON): More than 90 dB (16 bits mode), More than 95 dB (24bits mode)
Distortion (at 1 kHz, emphasis ON, reference level): Less than 0.05%
Cross talk (at 1 kHz, between any two channels): Less than - 80 dB
Wow & flutter: Below measurable level
Head room: 20 dB (18 dB selectable)
Emphasis (ON/OFF selectable in REC mode): T1=50 µs, T2=15 µs
Environmental
Power requirements: AC 100 to 240 VAC, 50/60 Hz
Power consumption: 2A (200 W) / AC 240 V
Operating temperature: +41°F to +104°F
Storage temperature: -4°F to +140°F
Humidity: 20% to 90% (relative humidity)
*ISR: Interactive Status Reporting