MSW-M2100
Sony
MSW-M2100
Sony MSW-M2100 IMX Editing Player
This MPEG IMX™ Digital Multi Player provides a total replay capability for your 1/2-inch standard-definition Betacam® family cassettes – Betacam, Betacam SP®, Betacam SX®, Digital Betacam® – as well as MPEG IMX recordings. Equipped with an SDTI-CP* interface as standard, material in any of these formats is output as an MPEG Elementary Stream at 50 Mb/s. From there, a wide range of MPEG products are waiting to be connected. For example, non-linear editors and servers with SDTI-CP I/O are being produced by Sony and by other leading manufactures so you have maximum freedom of choice.
Product Weight: 50.69 lbs
Dimensions: 16.88"W x 6.88"H x 21.5"D
Technical Tools
PDF Documents
- Product Manual - Sony - MSW-M2100 (1009 KB)
- Manufacturer Data Sheet - Sony - MSW-M2100 (1009 KB)
Manufacturer Specs
General
Tape speed
MPEG IMX: 64.467(525) / 53.776 (625) mm/s
Digital Betacam: 96.7 mm/s
Betacam SX: 59.515 (525)/59.575 (625) mm/s
Betacam/Betacam SP: 118.6 (525)/101.51 (625) mm/s
Playback time (MPEG IMX): Max. 184 (525)/220 (625) min with BCT-184MXL cassette
Fast forward/rewind time: Approx. 3.5 min with BCT-184MXL cassette
Search speed range
MPEG IMX: ±78 times normal playback speed
Digital Betacam: ±50 times normal playback speed
Betacam SX: ±78 times normal playback speed
Betacam/Betacam SP: ±35 (525)/±42 (625) times normal playback speed
Servo lock time: 0.5 (525)/0.7 (625) s or less (from standby on)
Load/unload time: 6 sec or less
Output Signals
Analog composite output: BNC (x3, including one character out), 1.0 Vp-p, 75 Ω, sync negative
Analog component output: BNC (x3, for 1 set, Y/R-Y/B-Y),Y: 1.0 Vp-p, 75 Ω, sync negative, R-Y/B-Y: 0.7 Vp-p, 75 Ω
SDI output: BNC (x3, including one character out), SMPTE 259M (ITU-R BT.656-3), 270 Mb/s
SDTI-CP output: BNC (x2), SMPTE 326M (SDTI-CP)
Analog audio output: XLR (x4) (4CH: channel selectable)
Cue audio output: XLR (x1) (only Digital Betacam playback)
Digital audio output (CH 1/2, 3/4, 5/6, 7/8), AES/EBU: BNC (x4), 48 kHz fixed, Complies with AES-3id-1995
Remote control
Remote (RS-422A): D-sub 9-pin (x2), Sony 9-pin remote interface
RS-232C (ISR*): D-sub 9-pin (x1), RS-232C interface
Parallel Remote: D-sub 50-pin (x1)
Video control (1): D-sub 15-pin (x1)
Control Panel: Circular Connector 10-pin
Time code output: XLR (x1)
Memory card insertion slot: PCMCIA (x1)
Monitor output L/R: XLR (x2) (channel selectable)
Phones: JM-60 Stereo phone jack
Processor Adjustment Range
Video level: ±3 dB/ ∞ to 3 dB selectable
Chroma level: ±3 dB/ ∞ to 3 dB selectable
Set up/Black level: ±30 IRE/±210 mV
Chroma phase/hue: ±30°
System sync phase: ±15 µs
System SC phase: ±200 ns
Y/C delay: ±100 ns (Betacam/Betacam SP playback only)
Digital Video Performance
Sampling frequency: Y: 13.5 MHz, R-Y/B-Y: 6.75 MHz
Quantization
MPEG IMX/Betacam SX: 8 bits/sample
Digital Betacam: 10 bits/sample
Error correction: Reed-Solomon code
Analog component output (Digital Betacam playback)
D/A quantization: 10 bits/sample
Bandwidth: 0 to 5.75 MHz ±0.5 dB
S/N ratio: 62 dB or more
K-factor (2T pulse): 1% or less
Analog composite output (Digital Betacam playback)
D/A quantization: 10 bits/sample
Bandwidth (Y): 0 to 5.75 MHz ±0.5 dB
S/N ratio: 58 dB or more
Differential gain: 2% or less
Differential phase: 2°or less
Y/C delay: 20 ns or less
K-factor (2T pulse): 1% or less
Digital Audio Performance
Sampling frequency: 48 kHz (synchronized with video)
Quantization
MPEG IMX: 16 or 24 bits/sample (selectable)
Betacam SX: 16 bits/sample
Digital Betacam: 20 bits/sample
Analog output (Digital Betacam playback)
D/A quantization: 24 bits/sample
Frequency response (0 dB at 1kHz): 20 Hz to 20 kHz +0.5 dB/-1.0 dB
Dynamic range (at 1 kHz, emphasis ON): More than 95 dB
Distortion (at 1 kHz, emphasis ON, reference level): Less than 0.05%
Cross talk (at 1 kHz, between any two channels): Less than -80 dB
Wow & flutter: Below measurable level
Head room: 20 dB (18 dB selectable)
Environmental
Power requirements: AC 100 V to 240 V, 50/60 Hz
Power consumption: 2A (200 W)/AC 240 V
Operating temperature: +41 °F to +104 °F
Storage temperature: -4 °F to +140 °F
Humidity: 20% to 90% (relative humidity)
*ISR: Interactive Status Reporting
Tape speed
MPEG IMX: 64.467(525) / 53.776 (625) mm/s
Digital Betacam: 96.7 mm/s
Betacam SX: 59.515 (525)/59.575 (625) mm/s
Betacam/Betacam SP: 118.6 (525)/101.51 (625) mm/s
Playback time (MPEG IMX): Max. 184 (525)/220 (625) min with BCT-184MXL cassette
Fast forward/rewind time: Approx. 3.5 min with BCT-184MXL cassette
Search speed range
MPEG IMX: ±78 times normal playback speed
Digital Betacam: ±50 times normal playback speed
Betacam SX: ±78 times normal playback speed
Betacam/Betacam SP: ±35 (525)/±42 (625) times normal playback speed
Servo lock time: 0.5 (525)/0.7 (625) s or less (from standby on)
Load/unload time: 6 sec or less
Output Signals
Analog composite output: BNC (x3, including one character out), 1.0 Vp-p, 75 Ω, sync negative
Analog component output: BNC (x3, for 1 set, Y/R-Y/B-Y),Y: 1.0 Vp-p, 75 Ω, sync negative, R-Y/B-Y: 0.7 Vp-p, 75 Ω
SDI output: BNC (x3, including one character out), SMPTE 259M (ITU-R BT.656-3), 270 Mb/s
SDTI-CP output: BNC (x2), SMPTE 326M (SDTI-CP)
Analog audio output: XLR (x4) (4CH: channel selectable)
Cue audio output: XLR (x1) (only Digital Betacam playback)
Digital audio output (CH 1/2, 3/4, 5/6, 7/8), AES/EBU: BNC (x4), 48 kHz fixed, Complies with AES-3id-1995
Remote control
Remote (RS-422A): D-sub 9-pin (x2), Sony 9-pin remote interface
RS-232C (ISR*): D-sub 9-pin (x1), RS-232C interface
Parallel Remote: D-sub 50-pin (x1)
Video control (1): D-sub 15-pin (x1)
Control Panel: Circular Connector 10-pin
Time code output: XLR (x1)
Memory card insertion slot: PCMCIA (x1)
Monitor output L/R: XLR (x2) (channel selectable)
Phones: JM-60 Stereo phone jack
Processor Adjustment Range
Video level: ±3 dB/ ∞ to 3 dB selectable
Chroma level: ±3 dB/ ∞ to 3 dB selectable
Set up/Black level: ±30 IRE/±210 mV
Chroma phase/hue: ±30°
System sync phase: ±15 µs
System SC phase: ±200 ns
Y/C delay: ±100 ns (Betacam/Betacam SP playback only)
Digital Video Performance
Sampling frequency: Y: 13.5 MHz, R-Y/B-Y: 6.75 MHz
Quantization
MPEG IMX/Betacam SX: 8 bits/sample
Digital Betacam: 10 bits/sample
Error correction: Reed-Solomon code
Analog component output (Digital Betacam playback)
D/A quantization: 10 bits/sample
Bandwidth: 0 to 5.75 MHz ±0.5 dB
S/N ratio: 62 dB or more
K-factor (2T pulse): 1% or less
Analog composite output (Digital Betacam playback)
D/A quantization: 10 bits/sample
Bandwidth (Y): 0 to 5.75 MHz ±0.5 dB
S/N ratio: 58 dB or more
Differential gain: 2% or less
Differential phase: 2°or less
Y/C delay: 20 ns or less
K-factor (2T pulse): 1% or less
Digital Audio Performance
Sampling frequency: 48 kHz (synchronized with video)
Quantization
MPEG IMX: 16 or 24 bits/sample (selectable)
Betacam SX: 16 bits/sample
Digital Betacam: 20 bits/sample
Analog output (Digital Betacam playback)
D/A quantization: 24 bits/sample
Frequency response (0 dB at 1kHz): 20 Hz to 20 kHz +0.5 dB/-1.0 dB
Dynamic range (at 1 kHz, emphasis ON): More than 95 dB
Distortion (at 1 kHz, emphasis ON, reference level): Less than 0.05%
Cross talk (at 1 kHz, between any two channels): Less than -80 dB
Wow & flutter: Below measurable level
Head room: 20 dB (18 dB selectable)
Environmental
Power requirements: AC 100 V to 240 V, 50/60 Hz
Power consumption: 2A (200 W)/AC 240 V
Operating temperature: +41 °F to +104 °F
Storage temperature: -4 °F to +140 °F
Humidity: 20% to 90% (relative humidity)
*ISR: Interactive Status Reporting